Panduit S050X150VAM Self-Laminating Vinyl Wire & Cable Label Cassette

Overview

The Panduit S050X150VAM is a pre-cut, self-laminating vinyl label cassette from the PXE™ line, engineered for wire and cable identification in structured cabling, security, and network installations. Each cassette packages the label stock and ribbon together — so swapping it into the MP300 portable printer takes seconds rather than the fiddly two-part reload process common on competing platforms. If you've ever re-labeled a cable tray mid-installation only to find the labels peeling or smearing a week later, the laminated construction here addresses exactly that failure mode.

The cassette delivers 175 pre-cut labels per unit, sized at 12.7 × 38.1 mm (0.5 in × 1.5 in), with a white print zone and a clear protective laminate overlay that locks in the printed text against abrasion, moisture, and the handling damage that bare-vinyl labels accumulate in active cable environments. Cat5e and Cat6 cable diameters are the explicit target size range, though the label's wrap geometry makes it broadly applicable to similarly sized conductors and patch-panel ports.

Key Features

• All-in-One Cassette (Label + Ribbon): The S050X150VAM cassette contains both the vinyl label stock and the thermal-transfer ribbon in a single drop-in unit. In a multi-technician install where cassettes are being swapped across crew members, this eliminates the common mistake of loading label and ribbon out of sync — a direct time and waste saver.
• Self-Laminating Clear Overlay: Once printed, the transparent laminate wraps over the white print zone and adheres to the cable jacket. The laminate acts as a physical shield: the text survives cable pulls, zip-tie cinching, and normal shop-floor handling that would degrade an unprotected label surface. This is the difference between labels that are still readable at a service call six months later versus ones you're squinting at or reprinting.
• 12.7 × 38.1 mm Label Dimensions: At 0.5 in wide and 1.5 in long, there's enough print real estate for a cable ID number, port assignment, and destination field — the three fields a structured cabling tech typically needs in a data center or IDF closet. Smaller labels save space on dense patch panels; this size hits the practical minimum for legible multi-field labeling.
• 175 Labels Per Cassette: A full cassette covers a meaningful run — a 48-port patch panel with spares, or a partial cable tray with room for rework. Knowing the yield per cassette simplifies procurement: five-packs (the Panduit PXE™ catalog package quantity for S050X150VAM) = 875 labels, appropriate for a mid-scale deployment without over-ordering.
• Cat5e / Cat6 Cable Diameter Fit: Panduit specifies this label's wrap range for Cat5e and Cat6 cable, the dominant media in commercial LAN and security camera network runs. If you're labeling fiber trunks or heavier coax, verify the wrap diameter separately — this cassette is optimized for the UTP/STP data-cable class.
• Vinyl Material Construction: Vinyl provides a balance of flexibility (wraps cleanly without cracking) and chemical resistance that paper labels lack entirely. In a mechanical room, server closet, or conduit bundle where labels contact cable jacket plasticizers over time, vinyl holds up where paper deteriorates.
• RoHS Compliance: The S050X150VAM meets RoHS (Restriction of Hazardous Substances) requirements — relevant for enterprise buyers with WEEE/RoHS documentation requirements, particularly in EU-destined equipment or green-building certified facilities.
• White Print Zone, Transparent Base: The white field maximizes print contrast for thermal-transfer output. Black text on white reads cleanly under low-light conditions in server rooms and cable trays — not a trivial concern when a technician is tracing cables with a flashlight at 2 a.m.

Integration & Compatibility

The S050X150VAM is designed specifically for use with the MP300 portable label printer — Panduit's field-format thermal-transfer unit in the PXE™ system. It is not a universal cassette; the PXE™ cassette format is proprietary to the MP300 platform. Before ordering, confirm the printer model on site is the MP300. Panduit cross-references this cassette against competitor part numbers M6-29-427, M-89-427, and S050X150VAC — useful if you're evaluating a drop-in replacement for a Brady or similar label system currently in use.

For integrators running cable management and identification programs across multiple sites, the five-pack quantity (Package Qty: 5, Carton Qty: 80) structures procurement cleanly: five-packs for a single job order, case quantities for blanket POs against a multi-site rollout. The RoHS-compliant material designation supports procurement documentation for facilities operating under environmental compliance frameworks.

What's in the Box

• 5 × S050X150VAM PXE™ self-laminating vinyl label cassettes (175 labels per cassette, label + ribbon included in each cassette)

Frequently Asked Questions

Q: What printer does the S050X150VAM cassette work with?

A: The S050X150VAM is designed for use with the Panduit MP300 portable label printer. It is not compatible with other printer platforms — the PXE™ cassette format is specific to the MP300.

Q: How many labels come in each cassette, and how many cassettes are in a package?

A: Each cassette contains 175 pre-cut labels. The S050X150VAM is sold in a 5-cassette package, giving you 875 labels total per package. Carton quantity is 80 cassettes (16 packages).

Q: What cable sizes does the S050X150VAM label fit?

A: Panduit specifies the label's wrap range for Cat5e and Cat6 cable diameters. If you need to label larger cables (fiber trunks, coax, larger conduit), verify the wrap geometry against the cable OD before ordering.

Q: Is the S050X150VAM RoHS compliant?

A: Yes. The S050X150VAM meets RoHS (Restriction of Hazardous Substances) requirements, making it suitable for deployments with EU compliance documentation requirements or green-building certified facilities.

Q: What are the label dimensions on the S050X150VAM?

A: Labels measure 12.7 mm × 38.1 mm (0.5 in × 1.5 in). The white print zone occupies the center field; the clear laminate overlay extends to wrap and protect the printed area once applied to the cable.

Q: Does the cassette include both the label stock and the ribbon?

A: Yes. The S050X150VAM cassette is an all-in-one unit — it contains both the vinyl label media and the thermal-transfer ribbon. You load one cassette and it's ready to print; there is no separate ribbon cartridge to manage.

Karl Wilson

The S050X150VAM is the cassette I spec for structured cabling crews who need to stay moving in the field. The all-in-one label-plus-ribbon format is the detail that actually matters on a job site — at 175 labels per cassette, a technician can run through an entire 48-port IDF closet without stopping to swap media, and the five-pack package quantity means a project manager can hand a tech a single sealed unit and know they have enough stock for the job without counting individual cassettes.

Technical Highlights:

• 175 Labels Per Cassette: Enough to complete a full 48-port patch panel run with room for rework labels — no mid-job cassette changes during a standard IDF build-out.
• 12.7 × 38.1 mm Print Area: The 38.1 mm length accommodates a three-field label (cable ID / port / destination) in a legible font on the MP300 platform — minimal but workable for standard structured cabling documentation practice.
• Self-Laminating Overlay on Vinyl Base: Vinyl handles cable jacket plasticizer migration better than paper or polyester over multi-year service life. The laminate overlay adds a physical abrasion layer — the labels stay readable through normal cable management operations including zip-tie cinching and tray pulls.

Deployment Considerations:

• The PXE™ cassette is MP300-specific — confirm the on-site printer model before shipping cassettes to a remote location. A mismatch means the entire package quantity is non-deployable until the right printer arrives.
• Cat5e/Cat6 is the specified cable diameter range. Labeling 6A or fiber patch cables with a different OD profile requires verifying the wrap geometry separately — don't assume cross-compatibility without checking the cable jacket diameter against Panduit's wrap specification for this cassette.

The S050X150VAM is the right call for enterprise LAN and physical security cabling projects where the documentation standard requires durable, laminated wire IDs on Cat5e/Cat6 runs and the site is already standardized on the Panduit MP300. It's not a general-purpose label — it's a precision consumable for a specific printer and cable class, and that specificity is exactly what makes it reliable in that context.