Panduit CPPA24FM6BL Mini-Com 24-Port Flush-Mount Modular Patch Panel
Overview
The Panduit CPPA24FM6BL is a 24-port, 1U modular patch panel from the Panduit Pan-Net® structured cabling line, built for installers who need a clean, low-profile termination point in standard equipment racks. Flush-mounted directly to the rack face, it accepts 24 Mini-Com™ keystone modules in a single rack unit — keeping your horizontal cable management tight and your patch bay organized without eating extra rack space. If you're building out a structured cabling patch panel layer in an IDF or MDF, this is a practical workhorse chassis that gets out of the way and lets the modules do the job.
Key Features
- 24 Mini-Com™ Module Ports in 1U: Fitting 24 ports into a single rack unit means you can terminate a full 24-port switch uplink run without consuming more than 1.75 inches of vertical rack space — critical in dense wiring closets where every U counts.
- Ports Grouped in Sets of 6: The 6-port grouping makes it straightforward to organize patch runs by switch, VLAN, or floor zone. You can label each group independently rather than hunting across a flat 24-port row for the right connection.
- Flush Rack Mount: The flush-mount profile keeps the panel face even with the rack rail, reducing cable stress at the patch cord connection point and keeping the front of the rack cleaner than angled or protruding designs.
- Fits 19" and 23" Racks and Cabinets: At 19 inches wide (482.6mm), this panel drops into standard 19" telecom and data racks — and also accommodates the older 23" rack form factor common in legacy telco and campus wiring closets.
- Cold-Rolled Steel (CRS) Construction: The CRS chassis holds its shape under the mechanical stress of repeated plug-and-pull patch cord cycling, which matters in high-activity distribution frames where connectors are moved frequently.
- Label Strip Compatible: Adhesive label strips fit directly on the panel face, so you can document port assignments without secondary labeling hardware. Legible port identification reduces mis-patch incidents during moves, adds, and changes.
- Pan-Net® Sub-Brand Pedigree: Designed within the Panduit Pan-Net structured cabling ecosystem, the panel is engineered to work with the full Mini-Com™ module family — jacks, couplers, and inserts — rather than being a generic chassis that fits some but not all modules.
Integration & Compatibility
The CPPA24FM6BL accepts any Mini-Com™ module from the Panduit Pan-Net® line, including Category 5e, 6, and 6A unshielded jacks, fiber couplers, and specialty inserts. The unshielded design is appropriate for standard copper deployments; if your installation requires shielded (STP/FTP) termination to meet EMI requirements in industrial or high-interference environments, evaluate the shielded variants in the Panduit patch panel family. For complete horizontal cabling runs, pair this panel with a compatible horizontal cable manager above or below the panel to maintain bend radius on patch cords. This panel does not include modules — order Mini-Com™ jacks separately based on your required cable category.
Frequently Asked Questions
Q: Does the CPPA24FM6BL include Mini-Com™ modules or jacks?
A: No. The CPPA24FM6BL is the chassis only. Mini-Com™ keystone modules (jacks, couplers, inserts) must be ordered separately based on your required cable category and application.
Q: What rack sizes does the CPPA24FM6BL fit?
A: It fits standard 19-inch and 23-inch racks and cabinets. The overall width is 19 inches (482.6mm) and height is 1.72 inches (43.7mm), occupying 1U of rack space.
Q: Is the CPPA24FM6BL suitable for shielded (STP) cabling systems?
A: No. This panel is designed for unshielded applications. If your installation requires shielded termination for EMI compliance, select a shielded patch panel variant from the Panduit Pan-Net® line.
Q: How are the ports organized on the CPPA24FM6BL?
A: The 24 ports are grouped in sets of 6, making it easy to organize and label port assignments by switch port block, VLAN, or zone without custom marking.
Q: Can I use label strips with the CPPA24FM6BL?
A: Yes. The panel is compatible with adhesive label strips applied directly to the panel face for port identification — no secondary labeling hardware required.
The CPPA24FM6BL is the panel I reach for in standard-density IDF builds where you need all 24 ports in one rack unit without burning vertical space on an angled chassis or worrying about module compatibility across brands. The flush-mount profile is a practical detail — on a busy patch bay with 48 or 72 ports stacked, protruding panel faces create cable congestion that a flush design avoids entirely.
Technical Highlights:
- 1U, 24-Port Density: Terminating a full 24-port switch run in a single 1.72-inch rack unit keeps your IDF cabinet clean and leaves headroom for cable managers and additional switch rows without vertical sprawl.
- 6-Port Grouped Layout: Port grouping in blocks of 6 aligns naturally with standard 24-port switch uplink layouts — each block of 6 maps cleanly to a switch port group, simplifying documentation and reducing mis-patch incidents during MACs.
- CRS Steel Chassis: Cold-rolled steel holds dimensional stability under continuous patch cord cycling. Lesser all-plastic chassis flex over time, loosening module retention — the CRS body keeps modules seated correctly across the panel's service life.
Deployment Considerations:
- This panel ships as a chassis only — budget for Mini-Com™ module procurement separately and verify the category rating (Cat 5e, 6, or 6A) matches your horizontal cabling before ordering jacks.
- The unshielded design rules out use in environments with significant EMI (adjacent VFDs, heavy industrial equipment, or installations requiring STP compliance) — confirm your noise environment before specifying this panel over a shielded variant.
Best fit for standard enterprise IDF buildouts — structured cabling installers running Cat 6 or Cat 6A horizontal plant into a 24-port PoE switch row where rack space is tight and port density per U matters more than shielded termination.
