Vertiv Lbrt-aps-ups-ato - CPQ-1079605-01

Vertiv CPQ-1079605-01 APS UPS Unit

Overview

The Vertiv CPQ-1079605-01 is a configure-to-order APS (Automatic Power Supply/UPS) assembly unit bearing a bundle of commercial certifications including cTUVus, CSA 22.2, FCC Part 15-B, ISTA 1A, and EN61000-4-5. The SKU CPQ-1079605-01 (often searched as CPQ 1079605 01) represents a Vertiv-configured solution targeting environments where compliance pedigree and tested power-protection are non-negotiable procurement requirements.

Available evidence for this specific configuration is limited to its certification listings, a 280 mm dimensional reference, and operating temperature boundaries. Buyers evaluating this unit against a formal project BOM should confirm full power, topology, and runtime specifications directly with Vertiv or through pre-sales engineering prior to procurement.

Key Features

• cTUVus & CSA 22.2 Listed: Dual North American safety certifications mean this unit has passed independent laboratory testing for electrical safety — a hard requirement for many enterprise procurement and facilities teams operating under NEC or local authority jurisdiction.
• FCC Part 15-B Compliance: Electromagnetic emissions are within FCC Class B limits, reducing the risk of RF interference with co-located network, wireless, and surveillance equipment in the same rack or room.
• EN61000-4-5 Surge Immunity: Tested to IEC surge-immunity standards, confirming the unit can tolerate transient voltage events on the supply line — relevant in facilities with shared utility feeds or industrial-adjacent environments.
• ISTA 1A Tested: Passed packaged-product vibration and shock testing, providing documented confidence the unit will arrive undamaged through standard freight channels — a practical consideration for multi-site deployments.
• Operating Range 32–104°F (0–40°C) up to 4,921 ft (1,500 m): Standard commercial operating envelope covers typical data closets, security head-end rooms, and above-grade mechanical spaces without derating, provided ambient stays within range and altitude does not exceed 1,500 m.
• 280 mm Form Factor Reference: The single confirmed dimension (280 mm) provides a starting point for rack or shelf clearance planning, though full dimensional confirmation is required before final installation layout.

Frequently Asked Questions

Q: What certifications does the CPQ-1079605-01 carry?

A: The CPQ-1079605-01 carries cTUVus, CSA 22.2, FCC Part 15-B, ISTA 1A, and EN61000-4-5 listings per available evidence.

Q: What is the operating temperature range for the CPQ-1079605-01?

A: The unit is rated for 32–104°F (0–40°C) at altitudes up to 4,921 ft (1,500 m). Performance above 1,500 m should be confirmed with Vertiv before deployment.

Q: Is the CPQ-1079605-01 NDAA Section 889 compliant?

A: NDAA Section 889 compliance status is not confirmed in the available evidence for this SKU. Verify directly with Vertiv for government or federal procurement requirements.

Q: What does the CPQ-1079605-01 part number represent?

A: The CPQ prefix indicates a Vertiv configure-to-order or quote-based assembly. Full specification details — including power topology, capacity, and runtime — should be obtained from a Vertiv product configuration sheet for this specific part number.

Q: What is the warranty on the CPQ-1079605-01?

A: Warranty terms for this configure-to-order SKU are not confirmed in the available evidence. Contact Vertiv or a B2B specialty retailer with pre-sales engineering support to obtain warranty documentation for this part number.

James Everett

The CPQ-1079605-01 is a Vertiv configure-to-order APS/UPS assembly and the certification stack it carries — cTUVus, CSA 22.2, FCC 15-B, ISTA 1A, and EN61000-4-5 — tells you a meaningful amount about where it's designed to land. That combination of North American safety listing plus IEC surge immunity testing is the profile you see on units destined for commercial head-end rooms and enterprise closets, not light-duty or consumer environments.

Technical Highlights:

• EN61000-4-5 Surge Immunity: IEC-standard surge testing confirms the unit can absorb transient line events — a real-world requirement in facilities where HVAC, elevator, or other inductive loads share the utility feed with sensitive electronics.
• FCC Part 15-B: Class B emissions compliance keeps RF interference out of co-located wireless access points and network gear — worth noting when this unit sits inside a surveillance or access control head-end with active wireless infrastructure.
• 0–40°C Operating Window: Covers the full range of typical conditioned commercial spaces. The 1,500 m altitude ceiling is the spec to watch — above that, thermal derating applies and Vertiv confirmation is needed before spec'ing this unit into high-elevation sites.

Deployment Considerations:

• The CPQ prefix signals a configure-to-order BOM line item — confirm power capacity, topology (online double-conversion vs. line-interactive), and runtime specs from the Vertiv configuration sheet before finalizing rack space and branch-circuit sizing.
• Only one physical dimension (280 mm) is confirmed in available evidence; do not finalize rack unit allocation or shelf depth planning without the complete dimensional drawing from Vertiv.

For a security head-end room or network closet requiring documented North American and IEC certification compliance on the power protection layer, the CPQ-1079605-01 fits the compliance brief — but this SKU requires full configuration verification before it lands on a final BOM.