Paging & Speakers for Commercial Facilities

Q: What's the difference between 70V and 100V line speakers?

Both 70V and 100V are constant-voltage systems that allow long cable runs and easy zone expansion. 70V is more common in North America and smaller facilities; 100V is standard in Europe and large installations. They use the same transformer-coupled wiring principle but are not interchangeable—confirm your amplifier output voltage before purchasing speakers.

Q: Can I mix PoE and analog speakers in the same system?

Yes, if your control unit supports both. PoE speakers from Axis or 2N can coexist with analog 70V zones via separate amplifier modules or hybrid controllers. However, you'll manage two different audio paths and power feeds—simpler to standardize on one technology per facility if possible.

Q: How do I calculate total wattage needed for a multi-zone paging system?

Add the nominal wattage (at 8Ω or line-voltage rated power) of all speakers in a zone; don't simply use the amplifier's maximum rating. For example, five 5W speakers = 25W minimum amplifier; use 40–50W to allow headroom and prevent distortion. Account for simultaneous use across zones and peak announcement demand.

Q: What's the minimum IP rating for outdoor speakers in a warehouse?

IP54 resists dust and light splash but is not suitable for rain or hosing. IP65 is the practical minimum for outdoor loading docks, yards, and wet areas. IP67 (temporary submersion) and IP69K (high-pressure jets) exist but are overkill for most facilities. Check local climate and cleaning practices to avoid premature corrosion.

Q: Do paging speakers need special cabling or conduit?

Standard Ethernet (Cat5e/6) works for PoE speakers; analog 70V/100V speakers use standard speaker cable (16–12 AWG depending on distance). Outdoor installations should use UV-rated PVC conduit or direct-bury cable to protect against UV degradation and moisture. Verify speaker accessories include appropriate cable terminations and strain relief.

Q: How do I ensure paging announcements are intelligible in a noisy environment?

Choose speakers rated 95+ dB SPL and position them to minimize echo and reverberation. In warehouses, use directional horns aimed at occupied zones rather than omni-directional ceiling speakers. Test speech intelligibility (clarity of words, not just volume) during commissioning. Consider zone-based distribution—multiple smaller speakers at moderate volume beats one loud speaker in a large space.

Plan Your Deployment

Indoor vs outdoor coverage zones
Coverage area and sound dispersion requirements
Ambient noise levels and intelligibility needs
Integration with paging controllers or IP intercom systems
Mounting height and placement strategy

Showing Results for Paging & Speakers

Compare

Out of stock
Geovision

SKU: GV-PA903BT

Geovision GV-PA903BT Gigabit PoE Injector

Gigabit PoE injector for IP cameras over existing CAT5e/CAT6
- 802.3af PoE (15.4W max) powers cameras without separate AC runs
- 1000 Mbps Gigabit throughput maintains full video bandwidth
- Plug-and-play operation—no config or management required
Special Order · Ships in 2-3 weeks

$123.99 $121.99 Save $2.00

Add to Cart
The item has been added
Compare

Out of stock
Geovision

SKU: GV-PA903BT-140

Geovision GV-PA903BT Pole Mount Adapter

Pole mount adapter with PoE power for Geovision camera systems
- PoE powered up to 95W—no separate power supply needed for outdoor poles
- Supports CAT5e/6 cable runs up to 328 ft from adapter to camera
- White housing rated for 0–40°C outdoor operating temperatures
Special Order · Ships in 2-3 weeks

$123.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SMT-2721PV

Hanwha SMT-2721PV 27 AI Public View Monitor

27" Full HD display with built-in 2MP camera and AI analytics for retail
- 2MP IP camera captures 1920×1080 video with 107.7° field of view and H.265
- AI detects people, counts crowds, tracks queues, and generates heatmaps in real-time
- Works in near-darkness at 0.03 lux; portrait or landscape orientation modes
Special Order · Ships in 2-3 weeks

$1,850.00 $1,240.99 Save $609.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPA-C110B

Hanwha SPA-C110B IP Ceiling Speaker

IP ceiling speaker with 100dB output and PoE/PoE+ power
- 8" woofer + 2" tweeter two-way design spans 120Hz–20kHz for speech and music
- Single PoE+ cable delivers power and audio; 1GB internal + 32GB SD card storage
- SIP VoIP ready with multicast support for up to 256 zones in one network
Special Order · Ships in 2-3 weeks

$743.00 $498.99 Save $244.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPA-H100B

Hanwha SPA-H100B IP Horn Speaker

IP horn speaker with 124dB output and PoE+ power for outdoor announcements
- 124dB SPL at PoE+ (121dB at standard PoE) cuts through noise in industrial and outdoor settings
- IP66 rated, operates −40°C to +55°C; supports SIP VoIP with Grandstream, Yealink, Cisco, Asterisk
- 650Hz–5.3kHz response optimized for speech clarity; up to 256 zones via multicast on standard Ethernet
In stock · Ships same business day

$1,071.00 $718.99 Save $352.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPA-H100W

Hanwha SPA-H100W 124dB PoE IP Horn Speaker

124dB PoE horn speaker for outdoor PA and mass notification
- 124dB SPL on PoE+ with 10W Class D amp cuts through noise reliably
- IP66 weatherproof, 130°×160° coverage, tuned for speech intelligibility
- Single PoE cable powers and manages speaker via standard network switch
In stock · Ships same business day

$1,071.00 $802.99 Save $268.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPA-P100B

Hanwha SPA-P100B IP Pendant Speaker 101dB PoE+

101dB PoE+ pendant speaker for large-scale paging and emergency alerts
- 101dB SPL output via 10W Class D amp; 130Hz–20kHz response for voice clarity
- Single PoE+ cable powers full output; eliminates separate DC supplies and wiring
- 130° horizontal coverage reduces speaker count in open warehouses, campuses, hubs
In stock · Ships same business day

$892.00 $668.99 Save $223.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPA-P100W

Hanwha SPA-P100W White IP Pendant Speaker

PoE/PoE+ IP pendant speaker, 101dB max SPL, 2-way design
- 101dB sound pressure level (PoE+) with 10W Class D amp
- 2-way speaker (8" woofer + 2" tweeter), 130Hz–20kHz range
- Single-cable PoE/PoE+ power, 1GB memory + 32GB microSD slot
Special Order · Ships in 2-3 weeks

$892.00 $668.99 Save $223.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SPA-W100B

Hanwha SPA-W100B Black IP Wall Speaker

101dB IP wall speaker with PoE+ power for multi-zone PA systems
- 101dB SPL (PoE+) with 10W Class D amp and dual 5"/0.5" drivers
- PoE/PoE+ via single Ethernet cable; supports up to 256 zones
- IP54 rated for indoor/semi-outdoor; 1GB storage + microSD slot
Special Order · Ships in 2-3 weeks

$967.00 $648.99 Save $318.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SPA-W100W

Hanwha SPA-W100W IP Wall Speaker 101dB PoE+

101dB IP wall speaker with PoE+ power for enterprise PA zones
- Dual 5" + 0.5" drivers cover 180° × 120° with <0.1% THD at full SPL
- Single Ethernet cable powers speaker via PoE or PoE+ — no amp or PSU needed
- 256 multicast zones with IP54 rating for indoor and semi-outdoor deployment
In stock · Ships same business day

$967.00 $724.99 Save $242.01

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: DMS3TS

Speco DMS3TS Weather-Resistant 3-Way Speaker

Outdoor 3-way speaker with built-in 70V/100V transformer
- Three dedicated drivers optimize speech and mid-range clarity for PA
- Factory transformer eliminates field installation on 70V/100V systems
- UV-protected enclosure rated for outdoor wall, pole, and surface mount
Special Order · Ships in 2-3 weeks

$49.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: ER370B

Speco ER370B 16W Megaphone with Siren

16W megaphone with multi-tone siren for security announcements
- 16-watt output for intelligible audio across outdoor and indoor areas
- Integrated multi-tone alarm siren for emergency alerts and deterrence
- Access control compatible for automated audio triggers in security systems
Special Order · Ships in 2-3 weeks

$61.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: G86KITPR

Speco G86KITPR Speaker Installation Kit

Complete 2-speaker kit with brackets and cable management for wall/ceiling
- 2x G86TG speakers with TS8 brackets for flexible wall and ceiling mounting
- STH8 backcans included for organized cable routing and clean installations
- Ready for multi-room audio, paging, and security system deployments
Special Order · Ships in 2-3 weeks

$111.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: G86KITPRC

Speco G86KITPRC Dual Speaker Installation Kit

Dual-speaker kit with brackets and backcans for zone audio
- Includes 2× G86TCG speakers, TS8 brackets, STH8 backcans
- Ceiling and wall mount options for flexible placement
- Works with Speco audio distribution and IP security platforms
Special Order · Ships in 2-3 weeks

$126.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: G86TG1X1C

Speco G86TG1X1C 1x1 Ceiling Tile Speaker Volume Control

1x1 ceiling tile speaker with onboard volume control for drop-ceiling paging
- 12x12 inch form factor replaces standard suspended ceiling tiles directly
- Integrated potentiometer adjusts output level without remote control hardware
- Designed for commercial paging, background music, and security audio systems
Special Order · Ships in 2-3 weeks

$30.99

Add to Cart
The item has been added
Compare

Out of stock
Speco Technologies

SKU: PBM240A

Speco PBM240A 240W PA Mixer Amplifier Module Bay

240W PA mixer amp with modular input/output bay for custom audio routing
- 240-watt amplifier with integrated mixer for combining multiple analog and digital sources
- Plug-in module bay architecture allows field-configurable inputs and outputs without unit replacement
- Rack or panel-mount design fits schools, hospitals, retail, and corporate audio systems
Special Order · Ships in 2-3 weeks

$784.99

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Impedance, Wattage & Line Voltage Matching

Speaker impedance (8Ω, 16Ω, 70V, 100V) must match your amplifier output and total circuit load. Undersized amplifiers cause distortion and speaker failure; oversized wattage drives unnecessary heat. Verify speaker accessories include matching transformers and load-matching terminal blocks.

Coverage Area & Sound Pressure Level (SPL)

Rated SPL at 1m (typically 86–110 dB) determines intelligibility in your acoustic space. Warehouses and outdoor areas need 95+ dB; offices need 80–90 dB. Factor in ambient noise, ceiling height, and distance from the farthest listener to avoid under-powering announcements.

Environmental & Moisture Ratings

Indoor speakers (no rating) are suitable only for climate-controlled spaces. IP54+ ratings resist dust and light splash; IP65+ are required for outdoor, wet areas, loading docks, and kitchens. Stainless hardware and UV-resistant enclosures extend lifespan in harsh conditions.

Integration with Existing Intercom & Paging Systems

PoE-based speakers from Axis, 2N, and Hanwha integrate natively into IP intercom backbones; analog speakers from Valcom and Speco Technologies work with amplified zone systems. Confirm compatibility with your control unit, VoIP PBX, or legacy paging amplifier before purchase.

Mounting, Physical Form & Aesthetic Constraints

Ceiling-flush, pendant, wall-mount, and pole-mount options suit different interior and exterior contexts. Smaller facilities often prefer compact mounting solutions; large campuses require standardized, replaceable form factors. Verify clearance, bracket compatibility, and whether speakers need accessories for installation.

Reliability During Critical Events & System Redundancy

Paging systems must remain operational during power outages, network failures, and security incidents. Redundant amplification, battery backup on PoE injectors, and hardwired failover paths protect emergency announcements. Reference why surveillance systems fail during incidents for broader system resilience principles that apply to integrated paging infrastructure.

Technology Stack

The specs and acronyms that actually affect paging & speakers performance.

70V & 100V Line (Constant-Voltage)

Low-impedance, transformer-coupled circuit design that allows long cable runs and parallel speaker wiring without significant voltage drop or impedance mismatches. Standard in analog commercial paging installations across multiple zones and floors.

PoE (Power over Ethernet)

Single Cat5e/6 cable delivers both power and IP audio stream to networked speakers, eliminating separate audio and power cabling. Simplifies installation and enables centralized amplification in small-to-medium facilities with existing LAN infrastructure.

SPL at 1m (Sound Pressure Level)

Measured output in decibels; higher SPL means longer throw distance and greater intelligibility in noisy environments. Typical range is 86–110 dB; outdoor and warehouse speakers usually 95+ dB to overcome ambient machinery and traffic noise.

IP Rating (Ingress Protection)

Two-digit code (e.g., IP54, IP65) indicating dust and water resistance. First digit = dust protection; second = water resistance. IP54 resists light splash; IP65 is fully sealed for outdoor and wet-environment use.

Frequency Response & Bandwidth

Paging speakers typically optimize 500 Hz–4 kHz (human speech clarity) rather than full-range audio; narrow bandwidth reduces cost and improves voice intelligibility. Wider response (20 Hz–20 kHz) adds cost but useful for music-on-hold or dual-use systems.

Transformer & Impedance Matching

Built-in or external transformers (70V/100V step-down types) convert fixed-voltage line output to speaker impedance while isolating voice-only audio from other circuits. Essential for long cable runs and multi-zone amplification to prevent distortion and speaker damage.

Typical Deployment Scenarios

Mid-Size Office Campus (6 buildings, 30 zones)

Deploy 45–60 ceiling speakers across 6 buildings on a single 70V/100V line system. Use Valcom or Speco amplifiers (1 per building) with zone selectors and audio input from IP PBX. Include intercom accessories (selector modules, transformers) for each zone. Budget for ceiling/wall mounts and outdoor break-area horns.

Warehouse with Loading Dock & Forklift Areas

Install 12–15 weather-rated horn and ceiling speakers in high-ambient-noise zones (dock: 100 dB SPL minimum). Use Axis or Speco IP speakers for office intercom integration; analog 70V horns for outdoor areas. Include stainless steel brackets, UV-resistant cabling, and weather-rated conduit for exterior runs.

K-12 Campus Emergency Mass Notification (2,000+ occupants)

Integrate Code Blue emergency speakers (25–35 units) with pole-mounted horns in quad areas, parking, and athletic facilities. Pair with Hanwha or 2N IP paging endpoints for 1-touch evacuation announcements. Include UPS-backed PoE injectors and hardwired analog backup amplifiers. Refer to school surveillance system design guide for integrated voice–video coordination.

Retail Multi-Location Chain (10 stores, IP backbone)

Deploy 8–10 ceiling speakers per store on PoE from Axis or Hanwha. Connect each store's IP speaker network to centralized corporate VoIP PBX for corporate announcements and local zone paging. Use speaker accessories (mount brackets, cable management) for uniform install. Scale power budget across PoE infrastructure to avoid switch overload.

Frequently Asked Questions

What's the difference between 70V and 100V line speakers?

Both 70V and 100V are constant-voltage systems that allow long cable runs and easy zone expansion. 70V is more common in North America and smaller facilities; 100V is standard in Europe and large installations. They use the same transformer-coupled wiring principle but are not interchangeable—confirm your amplifier output voltage before purchasing speakers.

Can I mix PoE and analog speakers in the same system?

Yes, if your control unit supports both. PoE speakers from Axis or 2N can coexist with analog 70V zones via separate amplifier modules or hybrid controllers. However, you'll manage two different audio paths and power feeds—simpler to standardize on one technology per facility if possible.

How do I calculate total wattage needed for a multi-zone paging system?

Add the nominal wattage (at 8Ω or line-voltage rated power) of all speakers in a zone; don't simply use the amplifier's maximum rating. For example, five 5W speakers = 25W minimum amplifier; use 40–50W to allow headroom and prevent distortion. Account for simultaneous use across zones and peak announcement demand.

What's the minimum IP rating for outdoor speakers in a warehouse?

IP54 resists dust and light splash but is not suitable for rain or hosing. IP65 is the practical minimum for outdoor loading docks, yards, and wet areas. IP67 (temporary submersion) and IP69K (high-pressure jets) exist but are overkill for most facilities. Check local climate and cleaning practices to avoid premature corrosion.

Do paging speakers need special cabling or conduit?

Standard Ethernet (Cat5e/6) works for PoE speakers; analog 70V/100V speakers use standard speaker cable (16–12 AWG depending on distance). Outdoor installations should use UV-rated PVC conduit or direct-bury cable to protect against UV degradation and moisture. Verify speaker accessories include appropriate cable terminations and strain relief.

How do I ensure paging announcements are intelligible in a noisy environment?

Choose speakers rated 95+ dB SPL and position them to minimize echo and reverberation. In warehouses, use directional horns aimed at occupied zones rather than omni-directional ceiling speakers. Test speech intelligibility (clarity of words, not just volume) during commissioning. Consider zone-based distribution—multiple smaller speakers at moderate volume beats one loud speaker in a large space.

Paging & Speakers

Plan Your Deployment

Showing Results for Paging & Speakers

Geovision GV-PA903BT Gigabit PoE Injector

Geovision GV-PA903BT Pole Mount Adapter

Hanwha SMT-2721PV 27 AI Public View Monitor

Hanwha SPA-C110B IP Ceiling Speaker

Hanwha SPA-H100B IP Horn Speaker

Hanwha SPA-H100W 124dB PoE IP Horn Speaker

Hanwha SPA-P100B IP Pendant Speaker 101dB PoE+

Hanwha SPA-P100W White IP Pendant Speaker

Hanwha SPA-W100B Black IP Wall Speaker

Hanwha SPA-W100W IP Wall Speaker 101dB PoE+

Speco DMS3TS Weather-Resistant 3-Way Speaker

Speco ER370B 16W Megaphone with Siren

Speco G86KITPR Speaker Installation Kit

Speco G86KITPRC Dual Speaker Installation Kit

Speco G86TG1X1C 1x1 Ceiling Tile Speaker Volume Control

Speco PBM240A 240W PA Mixer Amplifier Module Bay

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Paging & Speakers

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service