Honeywell IH25-BR-2 RFID Accessory with Integrated IR
The Honeywell IH25-BR-2 is a purpose-built RFID accessory engineered for warehouse, logistics, and field service operations where environmental durability and 24/7 operational continuity matter. This is a genuine Honeywell component designed to integrate with Honeywell RFID systems while maintaining full manufacturer warranty coverage—a critical detail when your deployment spans multiple sites and you want to eliminate compatibility surprises that slow integrators down.
Key Features
- IP54 Environmental Rating: Dust and splash protection mean the unit operates reliably on high-throughput warehouse floors and outdoor inventory yards without degradation from swept dust or spill-downs. Note: IP54 handles splashes and light rain but not direct washdowns—if you're deploying near spray washers or carwashes, plan for a protective enclosure or step up to IP67 protection on a different model.
- Dual Connectivity (Bluetooth and USB): Pair with mobile inventory devices via Bluetooth or dock with stationary RFID terminals via USB without swapping hardware or requiring separate docking stations. This flexibility reduces deployment friction across mixed warehouse workflows where some teams work mobile and others work fixed-position.
- Integrated Infrared with 6-Meter Range: Built-in IR extends read capability into dimly lit warehouse aisles and low-light receiving bays—approximately 20 feet of effective illumination. You'll eliminate the need for supplemental lighting in moderate darkness, saving infrastructure cost and simplifying electrical runs in existing facilities.
- Night Vision Functionality: Asset scanning and inventory operations continue during off-hours or in naturally dark distribution centers without permanent auxiliary lighting installation. This extends your operational window for critical inventory counts or receiving operations that traditionally required manual lighting setup.
- Android OS Compatibility: Simplifies fleet deployment if your enterprise has standardized on Android mobile platforms. One operating system across inventory devices and RFID readers reduces your training overhead and IT support burden when rolling out updates or troubleshooting field units.
- POE Class 1 Power Efficiency: Minimal power draw (Class 1 rating) means this accessory won't strain your power infrastructure during installation. Relevant when integrating multiple RFID readers into a single power-managed system or deploying across bandwidth-limited PoE switches—you're not competing with power-hungry PTZ cameras or floodlight illuminators for available watts.
- Lightweight at 0.95 lbs: Portable design suits field technicians and mobile asset-tracking operations. Won't add material weight to inventory carts, mobile scanning rigs, or handheld setup kits, making it practical for staff who move between zones throughout the day.
Integration & Compatibility
Genuine Honeywell manufacture ensures electrical and mechanical compatibility with the Honeywell RFID system family. Avoid sourcing equivalent third-party accessories unless you have explicit compatibility testing documentation—swapping components can void OEM warranty and introduce intermittent communication failures that are difficult to diagnose in a multi-site network. If you're planning a wireless RFID expansion, confirm your primary RFID controller explicitly supports the dual Bluetooth/USB interface on this model before procurement.
Deployment Context
The IH25-BR-2 is built for warehouse management, inventory tracking, asset management, and field service operations across mixed indoor–outdoor environments. Logistics yards, cross-dock facilities, and distribution centers where conditions vary throughout the day benefit from the combination of IP54 protection and integrated night vision. If you're standardizing Honeywell RFID infrastructure across a multi-site network, using genuine Honeywell accessories eliminates electrical compatibility risk and simplifies fleet-wide procurement and lifecycle management.
Frequently Asked Questions
Q: Will the IH25-BR-2 work with non-Honeywell RFID readers?
A: The IH25-BR-2 is engineered specifically for Honeywell RFID systems. Compatibility with third-party readers is not supported. Confirm your primary reader is Honeywell-branded before procurement to avoid integration issues.
Q: What is the maximum effective IR range in typical warehouse lighting?
A: The 6-meter (approximately 20-foot) IR range is rated for low-light conditions. Performance degrades in bright ambient light or direct sunlight. For outdoor daytime operations, rely on visible-light focusing rather than IR illumination.
Q: Does the IH25-BR-2 require separate power, or does PoE Class 1 mean it draws power from the connected reader?
A: PoE Class 1 indicates low power consumption. Integration method depends on your RFID reader's power architecture—confirm your reader supports accessory-level PoE delivery. Some Honeywell controllers provide power to accessory ports; others require external wiring. Check your reader's documentation before installation.
Q: Is the IH25-BR-2 suitable for freezer or cold storage environments?
A: Operating temperature range is not specified in available documentation. If cold-chain warehouse deployment is required, contact the manufacturer or your integrator to confirm performance below 32°F (0°C).
Q: Will the night vision capability interfere with barcode scanning or optical readers?
A: The IR illumination in the IH25-BR-2 is designed for RFID tag reading, not barcode scanning. If you need to combine RFID reads with barcode verification on the same mobile device, confirm your handheld terminal supports dual-sensor operation without optical interference.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The IH25-BR-2 is a straightforward accessory choice if you're already standardized on Honeywell RFID infrastructure. The combination of IP54 dust/splash protection, integrated 6-meter IR, and dual Bluetooth/USB connectivity eliminates the need to source and manage separate IR modules or mobile-to-stationary interface hardware. What matters most here is the genuine Honeywell pedigree—this keeps your warranty intact and your integrator's debugging time short.
Technical Highlights:
- IP54 Rating: Dust and splash ingress won't degrade performance on warehouse floors or in outdoor yards. Not suitable for direct spray washdowns—recognize the boundary and plan enclosures accordingly.
- 6-Meter IR Range: Covers typical warehouse aisle distances without supplemental lighting, reducing infrastructure cost and simplifying deployment in existing facilities with variable ambient light.
- POE Class 1 (Minimal Draw): Won't strain your reader's power budget or require dedicated external power supplies when integrated into a Honeywell RFID controller with accessory power ports.
Deployment Considerations:
- Confirm your Honeywell RFID reader explicitly supports the dual Bluetooth/USB interface and has available accessory power ports. Some controllers require external wiring; others integrate power inline.
- IR range degrades significantly in bright sunlight or high ambient light. Daytime outdoor operations may require visible-light focusing or secondary barcode verification on the same handheld device.
Deploy the IH25-BR-2 in multi-shift warehouse or logistics operations where you need RFID continuity across mobile and fixed-position workflows without swapping hardware between stations. It's the right pick for cross-dock facilities or distribution centers that operate day and night and can't afford downtime for accessory swaps or third-party compatibility debugging.
