HES

HES

SKU: AQD4-1R

HES AQD4-1R 4A Dual Voltage Power Supply with Charger

Dual-voltage 4A supply with integrated charger for access control

• Selectable 12VDC or 24VDC output supports mixed security installations
• Built-in battery charger maintains backup power during outages
• Fire relay output integrates with emergency signaling systems

HES

SKU: AQL104

HES AQL104 10A 24V DC Power Supply Module

10A 24VDC module for access control power distribution

• 10-ampere output at 24VDC for door locks and strikes
• Module-only format integrates into custom enclosures
• Regulated DC power for auxiliary security devices

HES

SKU: AQD4-4F1

HES AQD4-4F1 Supervised Power Supply 12/24VDC 4A

Supervised 12/24VDC 4A power supply with four isolated fused channels

• Four independent 1A fused channels with fault isolation per circuit
• Selectable 12VDC or 24VDC output for legacy and modern security devices
• Regulated output for access control, surveillance, and alarm system loads

HES

SKU: AQD2-4C

HES AQD2-4C 2A Power Supply 12/24VDC with Charger

Dual-voltage 2A power supply with 4 PTC-protected outputs for access control

• Selectable 12/24VDC output with 2-amp capacity across 4 channels
• Integrated battery charger for backup power in access control systems
• PTC protection per output eliminates need for external fuses

HES

SKU: AQD4-4C1R1

HES AQD4-4C1R1 Supervised Power Supply 12/24VDC

Dual-voltage supervised supply with active fault detection for access control

• 4A main output + 1A dedicated monitoring circuit with real-time status
• Selectable 12VDC or 24VDC output for flexible controller and reader support
• Integrated PTC protection auto-manages overcurrent without nuisance shutdowns

HES

SKU: AQD2-8F8R1

HES AQD2-8F8R1 Power Supply 2A 12/24VDC Charger

Dual-voltage 2A power supply with 8 fused relays for access control

• Selectable 12VDC or 24VDC output at 2A for auxiliary power distribution
• 8 fused relay outputs including dedicated fire relay for life safety signaling
• Integrated battery charging in compact form factor for control panel mounting

HES

SKU: 1500C-630-LMS

HES Complete electric strike Kit - 1500C-630-LMS

• Complete kit ships with strike body, faceplate, bracket, and hardware—no field fabrication needed.
• Integrated latchbolt monitor switch feeds real-time door status to your access control system.
• 630 satin stainless finish resists corrosion and aligns with standard commercial door hardware.

HES

SKU: 1500C-630-LM

HES 1500C-630 LM - Lock monitor - 1500C-630-LM

• Form C dry contact output integrates with virtually any access control panel.
• Monitors actual bolt retraction, not just power state, closing the verification loop.
• Field-installs on compatible HES 1500 series strikes without replacing existing hardware.

HES

SKU: 1500C-630

HES 1500C-630 -Complete Electric Strike Kit

• Complete kit ships with strike body, faceplates, and all mounting hardware in one order.
• 630 satin stainless finish resists corrosion and matches standard architectural hardware.
• Supports both failsafe and failsecure wiring configs for flexible security policy deployment.

HES

SKU: 1200LBDURO

HES 1200LBDURO Alarm Controls 1200LB Single Magnetic Lock

• 1,200 lb holding force on a UL-listed fail-safe lock rated for commercial doors.
• 12/24V DC field-selectable with built-in door position sensor and bi-color LED.
• DURO reinforced aluminum body with a lifetime warranty reduces service callbacks.

HES

SKU: 1200DE

HES Alarm Controls 1200DE Delayed Egress Magnetic Lock 1200 lb

• Field-selectable 15/30-sec delay timer meets IBC and NFPA code requirements.
• 12/24V DC dual-voltage operation integrates with most access control power supplies.
• Built-in door position sensor and bi-color LED deliver real-time bond status feedback.

HES

SKU: 1200D

HES Alarm Controls 1200D Double Door Magnetic Lock 1 200lbs.

• Single housing delivers 1,200 lbs combined force (600 lbs/door) across both leaves.
• 12/24V DC field-selectable with built-in door position sensor and bi-color LED status.
• UL Listed, fail-safe, zero moving parts; backed by a lifetime warranty.

HES

SKU: 10620408

Hes Sb:1006-12/24D-630-Lbm - 10620408

• 12/24V DC field-selectable operation eliminates separate SKUs across mixed-voltage deployments.
• Integrated LBM reports latchbolt status directly to access panels, removing add-on door sensors.
• UL 1034 and UL 10C (3-hr fire) listed; 1,500 lb static strength with 1,000,000-cycle endurance.

HES

SKU: 10620407

Hes Sb:1006-12/24D-629 - 10620407

• Dual 12/24V DC field-selectable voltage eliminates stocking separate models per panel output.
• 1,500 lb static and 70 ft-lb dynamic strength with 1M-cycle endurance for high-traffic doors.
• UL 1034 and UL 10C 3-hour fire listed; fail-secure mode maintains lockdown during power loss.

HES

SKU: 10600011

HES OPTION:5200-500 Filler Block - 10600011

• Fills oversized or non-standard frame cutouts for proper 5200 series strike alignment.
• Satin stainless steel (630 finish) maintains structural integrity under repeated cycling.
• Field-installable direct replacement reduces retrofit callbacks caused by prep mismatches.

HES

SKU: 1006CS-630

HES 1006 Complete Pacs for Latchbolt Locks - 1006CS-630

• Fail-secure mode keeps doors locked on power loss, meeting perimeter security posture.
• UL 1034 and UL 10C (3 hr fire) listings satisfy code requirements for commercial openings.
• 1,500 lb static strength and 1M-cycle rating handle high-traffic commercial door demands.

HES

SKU: 1006CLB-630

Hes 1006 Complete Pacs For Latchbolt Locks - 1006CLB-630

• Fits standard ANSI A115.1 cylindrical cutout—no door prep modification required.
• Field-selectable fail-safe/fail-secure on 12/24V DC eliminates redundant SKUs.
• UL 10C 3-hour fire-rated with 1,500 lb static strength and 1M-cycle endurance.

HES

SKU: RP-28LBLUE

HES RP-28LBLUE S.G.S.S. Plate with Blue LED 12VDC

Steel S.G.S.S. plate with blue LED status indicator, 12VDC operation

• 1/2" blue LED provides clear visual feedback for door and gate positions
• Powder-coated steel construction resists corrosion in indoor and protected outdoor use
• Draws minimal power (under 50 mA) directly from 12VDC access control circuits

HES

SKU: DUC-3B

HES DUC-3B 600LB Magnetic Lock Dress-Up Cover

Polished brass dress-up cover for HES 600LB magnetic locks

• Fits standard 1.75-inch and 2-inch commercial door frames without lock removal
• Polished brass finish maintains professional appearance and resists corrosion
• Retrofit-compatible housing preserves full electromagnetic lock functionality

HES

SKU: 1600-629-DLM

HES Electric Strike Body Only Dual lock monitors - 1600-629-DLM

• Dual lock monitors give independent latch and deadbolt status to your access control panel.
• Body-only format reuses existing 1600 Series faceplates, cutting retrofit labor and parts cost.
• Rated UL 1034 and UL 10C 3-hour fire with 1,500 lb static strength for commercial-grade doors.