Panduit PWBPF4X18EZ Wire Basket Tee-Intersection Bracket
The Panduit PWBPF4X18EZ is a UL-classified steel tee-intersection bracket engineered to support 4" x 18" wire basket pathways at 90-degree junction points in commercial installations. Electro-zinc-plated for corrosion resistance and rated as an equipment grounding conductor per NEC 392.3(C) and 392.7(B), this bracket delivers code-compliant structural support for overhead cable tray runs in datacenters, telecom closets, and security control rooms where fire-rated pathway integrity and bonding continuity are non-negotiable.
Key Features
- UL Classified as equipment grounding conductor per NEC Sections 392.3(C) and 392.7(B)
- Steel construction with electro-zinc finish for durability in controlled-environment spaces
- 4" x 18" profile supports standard Panduit wire basket tray at tee intersections
- Single-unit packaging for job-specific ordering and inventory control
- Silver finish integrates with modern data-center aesthetics
Wire basket tray systems require load-rated structural hardware at every direction change and branch point to maintain pathway integrity under dynamic cable loads. The PWBPF4X18EZ addresses this at T-intersections—the junction where a perpendicular basket run branches off a main horizontal trunk. Steel construction handles the combined weight of filled baskets at the intersection, while the electro-zinc coating resists oxidation in HVAC-controlled telecom and IT environments. The bracket's UL classification as an equipment grounding conductor means it satisfies NEC bonding requirements without supplemental grounding straps, reducing installation labor and eliminating a common AHJ inspection hold point on rack-and-stack projects.
This component is sized for Panduit's 4"-depth, 18"-width wire basket series, which is commonly deployed in mid-density cable runs serving IP camera backhaul, access-control door loops, and intercom trunk lines in commercial security installations. When planning tee-branch layouts, verify that all three basket segments landing at the intersection share compatible width and depth specs—mixing basket sizes at a single tee creates a mechanical weak point and often requires custom fabrication to bridge the gap. For installations in corrosive or outdoor-transition environments (loading docks, parking structures), consider stainless-steel hardware; the electro-zinc finish on the PWBPF4X18EZ is engineered for controlled indoor climates, not salt-fog or chemical exposure.
The bracket ships as a single unit, allowing integrators to order exact quantities per print without breaking bulk cartons. This is particularly useful on retrofit jobs where the tee count is determined by as-built conditions rather than design intent—no leftover stock, no emergency reorders mid-install. Panduit's steel basket hardware is widely specified on university campus, healthcare, and government projects where the electrical inspector expects to see manufacturer torque specs and third-party listings at every support point. The PWBPF4X18EZ satisfies both requirements and carries the UL mark that closes out the pathway portion of your rack-infrastructure submittal package.
