Middle Atlantic Flush Poke-thru ASSY/20A/ - RC7ATCGY

Middle Atlantic RC7ATCGY Flush Poke-Thru Assembly

Overview

The Middle Atlantic RC7ATCGY is a flush-mount, multi-service poke-through assembly designed for clean, structured cable and service access through floors and work surfaces in commercial AV and building infrastructure deployments. At 7 in × 7 in (17.8 cm × 17.8 cm) with a 16 in (40.6 cm) depth, this unit accommodates standard commercial floor construction depths and delivers a finished gray appearance that integrates cleanly into conference rooms, boardrooms, and open office environments.

TAA compliance makes the RC7ATCGY a straightforward fit for government facility contracts, GSA schedules, and federally funded projects where Trade Agreements Act sourcing is a procurement requirement — no extra documentation chasing required when specifying for a compliant job.

This assembly is part of Middle Atlantic's infrastructure and AV integration product line, built for integrators who need a reliable, finished floor-access solution without custom fabrication. If you're building out a huddle room, executive conference space, or any environment where surface-run cables are not acceptable, the RC7ATCGY provides a code-friendly pathway for power and low-voltage services in a single footprint.

Key Features

• 7 × 7 in Footprint (17.8 × 17.8 cm): The square form factor fits standard poke-through cutout dimensions used in raised-floor and slab applications, reducing custom core-drilling on retrofit projects.
• 16 in Depth (40.6 cm): Accommodates typical commercial concrete slab thicknesses — confirm your slab depth before ordering, as this dimension determines compatibility with the floor assembly.
• Gray Finish: Matches standard commercial carpet tile and flooring aesthetics commonly specified in corporate interiors, reducing the visual footprint of floor service points.
• TAA Compliant: Sourced in compliance with the Trade Agreements Act — a hard requirement on many government, education, and federal contractor projects. Specify with confidence on compliant AV infrastructure bids.

Integration & Compatibility

The RC7ATCGY is designed as a multi-service assembly, supporting routing of power and low-voltage cabling (AV, data, communications) through a single floor penetration. Verify finish compatibility with your flooring specification and confirm the 16 in depth clears your slab and sub-floor assembly before rough-in. For broader floor-box and cable management solutions, review the full Middle Atlantic catalog. Integrators planning structured AV installations should also consider pairing with a cable management system above the floor plane for a fully finished installation.

Frequently Asked Questions

Q: Is the RC7ATCGY TAA compliant?

A: Yes. The RC7ATCGY is confirmed TAA compliant, making it eligible for use on government contracts, GSA schedules, and federally funded projects with Trade Agreements Act sourcing requirements.

Q: What are the dimensions of the RC7ATCGY?

A: The RC7ATCGY measures 7 in wide × 7 in tall × 16 in deep (17.8 cm × 17.8 cm × 40.6 cm). The 16 in depth is the critical measurement to verify against your floor assembly before installation.

Q: What color is the RC7ATCGY?

A: Gray. This is the standard finish for this assembly.

Q: What type of services does the RC7ATCGY support?

A: The RC7ATCGY is a multi-service poke-through assembly designed to route both power and low-voltage (AV, data, communications) cabling through a floor penetration. Consult the full product documentation for specific module and insert configurations supported.

Q: What floor depth does the RC7ATCGY accommodate?

A: The assembly is 16 in (40.6 cm) deep, which is sized for typical commercial concrete slab construction. Measure your actual slab and sub-floor depth before ordering to confirm fit.

Eden Phillips

The RC7ATCGY's 16 in (40.6 cm) depth is the spec I always tell integrators to verify first — commercial slabs vary, and a poke-through that doesn't clear the full assembly depth creates a rework situation that's expensive in a finished floor. Get that measurement confirmed in the plans before you order.

Technical Highlights:

• 7 × 7 in Footprint: Standard square cutout size keeps rough-in straightforward on both new construction and retrofit; no custom core-drill template needed for most commercial applications.
• 16 in Depth: Covers the depth range of typical commercial concrete slab construction — the number to confirm against your structural drawings before committing to this model.
• TAA Compliance: Confirmed for the RC7ATCGY, which matters the moment a government end-user or federally funded project is in scope. It's a checkbox that eliminates procurement friction on compliant bids.

Deployment Considerations:

• Verify actual slab depth against the 16 in assembly dimension before rough-in — this is the most common fit issue on retrofit jobs with non-standard slab construction.
• Evidence confirms color as gray only; if your project spec calls for a different finish, confirm alternative color availability directly with Middle Atlantic before committing this SKU to a submittal.

The RC7ATCGY is the right call for corporate conference rooms, boardrooms, and government facilities where TAA compliance is a hard bid requirement and a clean gray floor finish is part of the interior specification.