Datalogic CAB-559 RS-232 Serial Cable 9-Pin Female
Overview
The Datalogic CAB-559 is a genuine OEM RS-232 serial cable purpose-built for connecting Datalogic enterprise devices—scanners, mobile computers, automation controllers—to compatible peripherals and host systems. This 9-pin female connector cable is engineered to the original Datalogic specification, meaning pin configuration, impedance, and shielding match what the equipment expects. You avoid the intermittent connection faults and signal integrity issues that often accompany generic third-party alternatives.
If you're replacing a failed or damaged serial link in a production warehouse, retail checkout environment, or manufacturing floor, the CAB-559 restores connectivity without guesswork. This matters because a misconfigured or poorly shielded serial cable can introduce data corruption, dropped transactions, or cryptic device errors that are hard to trace back to a cable problem.
Key Features
- Genuine Datalogic OEM specification: Manufactured to original equipment standards, so pinout and electrical characteristics are guaranteed to match supported Datalogic devices. Eliminates compatibility risk when you need a replacement in a live environment.
- RS-232 serial interface: Implements the RS-232 standard (EIA/TIA-232-F), a proven protocol for short-range, asynchronous serial communication. Typical maximum cable run is up to 50 feet at standard baud rates, making it suitable for nearby peripheral connections without active repeaters.
- 9-pin female connector: DB9 female end allows connection to standard male RS-232 ports found on most legacy and current Datalogic equipment. Keyed design prevents accidental reversed insertion.
- Industrial-grade shielding: Cable construction includes proper shielding to reject electromagnetic interference common in warehouse floors, retail environments, and manufacturing plants with heavy machinery or power equipment running nearby. Reduces noise-induced bit errors on the serial line.
- Backed by Datalogic manufacturer warranty: As an OEM part, the CAB-559 carries Datalogic's warranty coverage. If the cable fails prematurely due to manufacturing defect, replacement is straightforward through authorized channels—no finger-pointing between vendor and integrator.
- Supports rapid deployment and stock rotation: For integrators maintaining multiple Datalogic installations across sites, carrying genuine OEM spares (CAB-559) ensures you can swap a failing cable immediately without waiting for delivery or troubleshooting compatibility on a customer site.
Integration & Compatibility
The CAB-559 is designed for seamless integration with Datalogic devices that feature RS-232 serial ports. Before ordering, verify that your device model includes an RS-232 female port (typically labeled COM, Serial, or RS-232). Some newer Datalogic products may have moved to USB or Ethernet; confirm your device supports 9-pin RS-232 connectivity. If you are unsure of your device's port configuration, consult the device's user manual or contact Datalogic technical support directly.
When installing, route the cable away from high-voltage power lines and RF sources to preserve signal integrity. Keep cable runs under 50 feet for standard baud rates (9600, 19200, 38400 bps). If longer distances are required, active RS-232 repeaters or conversion to RS-485 may be necessary—evaluate your site topology before ordering.
Frequently Asked Questions
Q: Is the Datalogic CAB-559 compatible with all Datalogic devices?
A: The CAB-559 is compatible with Datalogic devices that feature RS-232 serial ports with 9-pin female connectors. Not all Datalogic products include RS-232; newer devices may use USB or Ethernet. Verify your device specification before ordering.
Q: What is the maximum cable length I can safely use?
A: RS-232 is rated for distances up to 50 feet (approximately 15 meters) at standard baud rates (9600–38400 bps). Longer runs may experience signal degradation. If you require a longer distance, consider RS-232 repeaters or conversion to RS-485.
Q: Does the CAB-559 work in environments with electromagnetic interference?
A: Yes. The CAB-559 includes industrial-grade shielding designed to reject EMI from machinery, power equipment, and RF sources. Route the cable away from high-voltage lines for best results.
Q: What warranty does the CAB-559 carry?
A: As a genuine Datalogic OEM part, the CAB-559 is backed by Datalogic's manufacturer warranty. Exact terms depend on your region and purchase channel; consult the warranty documentation or your distributor for specifics.
Q: Can I use third-party RS-232 cables as a substitute?
A: Third-party cables may work if pinout and impedance happen to match, but mismatch is common and difficult to diagnose. Genuine OEM cables eliminate that risk and simplify troubleshooting if integration issues arise.
The Datalogic CAB-559 is a straightforward but critical component when you're integrating or maintaining Datalogic RS-232 peripherals. I've seen too many integration projects delayed or diagnosed as software bugs when the real culprit was a mismatched or damaged serial cable. The CAB-559 eliminates that guesswork because it's guaranteed to match the original pinout and electrical design.
Technical Highlights:
- DB9 female connector with proper RS-232 pin configuration: Ensures direct compatibility with Datalogic equipment that expects standard EIA/TIA-232 pinout. No crossover, no software workarounds needed.
- Industrial shielding for EMI rejection: Warehouse and manufacturing floors are noisy environments. Proper shielding prevents the intermittent bit errors and dropped frames that are nearly impossible to debug after the fact. Standard unshielded cables will fail reliability tests in such environments.
- 50-foot rated distance at standard baud rates: Covers the typical peripheral-to-host distance in most retail, warehouse, and small production settings. If your run exceeds 50 feet, you'll need active repeaters or a protocol change, so plan accordingly during site design.
Deployment Considerations:
- Verify device RS-232 support before ordering: Newer Datalogic products may ship with USB or Ethernet only. Check your device's port configuration to avoid a wasted purchase or emergency delays.
- Route carefully away from power lines: Even with shielding, running the CAB-559 parallel to high-voltage cables or RF sources can introduce noise. Use cable trays or routing guides to maintain separation—this is cheap insurance against intermittent faults.
- OEM warranty means faster support: If the cable fails in the field, you're not caught in a back-and-forth between the equipment vendor and a generic cable maker. Datalogic warranty coverage simplifies replacement logistics for multi-site integrators.
Deploy the CAB-559 for any legacy or current Datalogic RS-232 integration where reliability and rapid replacement matter—especially in warehouse automation, retail POS networks, and production floor data collection where a serial link failure cascades into significant downtime. Carrying a spare CAB-559 in your tech kit is cheap insurance.
