Code Blue CB5P00068 Emergency 2-Sided Dual Display
Overview
The Code Blue CB5P00068 is a dual-sided emergency display engineered for outdoor environments where rapid visual communication matters. This is not a camera or recorder — it's a PoE-powered signage device built to deliver emergency alerts and status information simultaneously on two facing surfaces, critical for facilities managing access control, security events, or operational emergencies. The model number CB5P00068 delivers a form factor purpose-built for mounting on walls, gates, or central building locations where personnel approaching from either direction must see the same alert in real time.
Key Features
- Dual-Sided Display Configuration: Two independent display surfaces ensure visibility from both approach angles — eliminating blind spots where an employee might miss a critical alert or status change. Essential in warehouse, loading dock, or facility entry scenarios where traffic flows bidirectionally.
- IP68 Environmental Rating: Fully sealed against dust and submersion up to 1 meter for 30 minutes — the CB5P00068 resists direct rain, spray, and temporary water events without performance degradation. Outdoor mounting on rooflines, vehicle gates, or exposed perimeters becomes viable without weatherproof housings.
- PoE Power Delivery: Single Ethernet run supplies both data and power — eliminates the need for dedicated 120V/240V runs to the display location. Simplifies installation in retrofit scenarios and reduces conduit and breaker panel complexity.
- Dimensions: 12.75" W × 13.29" H × 6.0" D: Compact form factor fits standard wall-mounted or pole-mounted configurations without excessive wind load. Vertical mounting height accommodates eye-level visibility for standing personnel while remaining visible from distance in open-air yards.
- 1-Year Manufacturer Warranty: Covers defects in materials and workmanship, providing baseline protection on a critical safety device. Verify extension warranty options with your distributor if multi-year coverage is required for mission-critical deployments.
- Blue Housing Color: Standard Code Blue branding and color coding aids personnel recognition of the device as an authorized emergency signage unit, reducing confusion in high-stress alert scenarios.
Integration & Compatibility
The CB5P00068 integrates with access control systems, building management platforms, and emergency notification systems that support standard network display protocols. PoE delivery means compatibility with any 802.3af or higher-powered network switch; verify your switch has adequate power budget if deploying multiple units. No proprietary cabling or isolated power circuits required — standard Cat5e/Cat6 runs support both data and power delivery.
Consult your VMS or security platform documentation to confirm display protocol support (ONVIF, RTSP, or proprietary push APIs). Code Blue documentation specifies supported integrations; coordinate with pre-sales engineering if your system uses non-standard protocols.
Frequently Asked Questions
Q: Is the CB5P00068 suitable for constant outdoor exposure?
A: Yes. The IP68 rating handles sustained rain, UV exposure, and temperature cycling typical of outdoor security perimeters. Verify mounting hardware is stainless steel or galvanized to resist corrosion in salt-spray or chemical environments.
Q: What happens to the display if the PoE connection is interrupted?
A: Power loss results in display shutdown. If fail-safe operation is required (display must remain visible during power loss), evaluate UPS backup or battery-backed PoE injector options with your integrator.
Q: Can I mount the CB5P00068 on a metal pole in high-wind areas?
A: Yes, standard VESA or surface-mount brackets are compatible. Confirm wind-load calculations with your structural engineer; the 6.0" depth and horizontal profile create moderate wind resistance — typical for wall-mounted signage in exposed locations.
Q: Does the 1-year warranty cover water damage from improper mounting?
A: Manufacturer warranty covers defects in materials and workmanship. Damage from improper installation, blocked drainage holes, or failure to apply weatherproofing sealant around cable entries typically falls outside warranty scope — confirm exclusions with your supplier.
Q: What PoE switch specifications are required for the CB5P00068?
A: The display draws power within 802.3af budget (under 13W typical). Any managed or unmanaged PoE switch supporting 802.3af or higher will supply adequate power; budget roughly 15W per unit for power infrastructure planning.
Q: Is the CB5P00068 compatible with my facility's access control system?
A: Compatibility depends on your system's display protocol and API support. Standard ONVIF or RTSP integration is common; proprietary systems (Salto, Gallagher, HID) require codec verification. Contact your access control integrator with the CB5P00068 model number to confirm compatibility before purchase.
I've deployed dual-sided emergency signage in warehouse and logistics facilities for years, and the CB5P00068 addresses a real gap: outdoor visibility from multiple approach angles without duplicating infrastructure. The IP68 rating is non-negotiable in those environments — rain and dust won't degrade the display, and the PoE power model eliminates the need for dedicated electrical runs, which cuts installation time and keeps costs predictable on retrofit projects.
Technical Highlights:
- IP68 Sealing: Fully sealed design resists submersion up to 1 meter — means you can mount it on loading dock aprons, gate structures, or roofline perimeters without worrying about drainage or housing enclosures. That simplicity translates to lower install labor and faster commissioning.
- Dual-Sided Display: Two independent surfaces eliminate the blind-spot problem on traffic corridors — personnel approaching from either direction see the same alert in real time, which matters when you're coordinating emergency procedures or access denials across a large footprint.
- PoE Power (802.3af compatible): Single Ethernet cable handles data and power — your switch doesn't need high-budget PoE+ or PoE++ unless you're stacking multiple units on one port. Budget roughly 12–15W per display for power calculations.
Deployment Considerations:
- Verify your access control or VMS platform supports the display protocol before purchase — Code Blue typically documents ONVIF or RTSP, but proprietary systems (Salto, Gallagher) may require custom integration, which adds timeline and cost.
- IP68 requires proper cable sealing at entry points; use weatherproof M12 or RJ-45 connectors with strain relief, and apply silicone sealant around cable glands if mounting outdoors. Blocked drainage holes or sloppy cable entries will void the IP rating in field conditions.
The CB5P00068 is the right pick for facilities managing outdoor perimeter alerting or emergency notification across loading docks, vehicle gates, or warehouse yards where PoE infrastructure already exists and visibility from multiple angles is non-negotiable.
