Middle Atlantic Cnsl Visionline LG S - LH-VLCLS

Middle Atlantic LH-VLCLS Lund/Halsey VisionLine 24/7 Command and Control Console

Overview

The Middle Atlantic LH-VLCLS is a large-format, 24/7 command and control console from the Lund/Halsey VisionLine series — purpose-built for security operations centers, network operations centers, and dispatch environments where operators work long shifts and equipment density demands serious structural support. At 83 inches wide and 308 lbs, this is not a reconfigurable office workstation; it is a fixed, heavy-duty operations console designed to anchor a control room. The LH-VLCLS ships with a black/silver/gray frame and a white worksurface, the combination typical of federal and public safety operations environments.

If you are outfitting a new SOC, dispatch center, or integrated command suite and need a console that handles both operator ergonomics and rack-mounted equipment in a single footprint, the Middle Atlantic VisionLine catalog warrants a close look before committing to a modular furniture approach. The LH-VLCLS sits at the larger end of the command and control console category — right-sized for multi-monitor, multi-operator stations rather than compact single-seat installs.

Key Features

• 83-inch (210.8 cm) Width: At just under 7 feet wide, this console accommodates multi-operator workstations or single-operator stations with generous lateral monitor spread. That width also provides room for side-by-side equipment bays without crowding cable management or operator elbow space — a meaningful factor on 12-hour shifts.
• 9 RU Rack Capacity: Nine rack units of integrated equipment space means you can house a compact NVR, a managed switch, KVM hardware, and a UPS all within the console body — keeping signal paths short and eliminating the separate equipment rack that would otherwise occupy floor space behind the operator.
• 220 lb (99.8 kg) Weight Capacity: The 220 lb rated load supports a full complement of rack-mounted gear plus multiple large-format displays without approaching structural limits. This rating gives you margin when display technology changes and heavier panels get added mid-lifecycle.
• 19-inch (48.3 cm) Usable Depth: The 19-inch usable rack depth accommodates standard 19-inch rack equipment. Full-depth servers and deep UPS units will not fit — plan your equipment selection around this constraint before procurement. Shallow to mid-depth NVRs, network appliances, and 1U switches are the appropriate rack fill.
• 39-inch (99.1 cm) Total Depth: The 39-inch total footprint gives operators a deep worksurface — enough for dual keyboard/mouse setups, reference binders, and drink clearance without equipment overhanging the operator zone. Room depth planning should budget roughly 3.5 feet of floor clearance in front of the console for chair travel.
• 26-inch (66 cm) Working Height: At 26 inches, the console sits at a standard seated-work height compatible with most operator chairs. Note that the evidence indicates this model is not height-adjustable — verify operator ergonomic requirements before specifying; if sit-stand capability is needed, a different VisionLine configuration applies.
• 308 lb (139.7 kg) Product Weight: At 308 lbs, the LH-VLCLS requires freight delivery and a team lift or mechanical assist for installation. Factor in structural floor load — raised access floors common in data center-adjacent NOCs should be evaluated for point load at the console feet before placement.
• Black/Silver/Gray Frame with White Worksurface: The two-tone finish (dark frame, white worksurface) is the standard VisionLine Federal Ops colorway. This finish is not a cosmetic afterthought — the white worksurface reduces eye strain under the high ambient light typical of 24/7 operations rooms and provides contrast for printed reference materials.

Integration and Compatibility

The LH-VLCLS integrates into control room infrastructure as a furniture platform rather than an active network device. The 9 RU equipment bay accepts standard 19-inch EIA rack hardware — NVRs, PoE network switches, KVM extenders, and patch panels are all common rack fills in command console deployments. Display mounting is handled via the VisionLine monitor arm and mounting ecosystem; consult Middle Atlantic's VisionLine accessory line for compatible monitor mounts and display arms rated for your display count and size combination.

Cable management within the console body should be planned before installation — the 39-inch total depth provides routing space, but conduit runs and power strip placement need to be mapped against the 19-inch usable rack depth to avoid interference with equipment service access. The console is not TAA-compliant, which disqualifies it from federal procurement programs requiring TAA certification under the Trade Agreements Act.

Frequently Asked Questions

Q: What is the rack capacity of the Middle Atlantic LH-VLCLS?

A: The LH-VLCLS provides 9 rack units (9 RU) of integrated equipment space with 19 inches of usable depth, accommodating standard 19-inch EIA rack hardware.

Q: How much weight can the LH-VLCLS support?

A: The console is rated for a 220 lb (99.8 kg) weight capacity. The console itself ships at 308 lbs, so plan for freight delivery and a mechanical assist or team lift during installation.

Q: Is the LH-VLCLS height-adjustable?

A: No. The LH-VLCLS is a fixed-height console at 26 inches (66 cm). If sit-stand or height-adjustable operation is required, a different configuration in the VisionLine series should be specified.

Q: Is the LH-VLCLS TAA compliant?

A: No. The LH-VLCLS is not TAA compliant and is not eligible for federal procurement programs that require Trade Agreements Act certification.

Q: What are the overall dimensions of the LH-VLCLS?

A: The console measures 83 inches wide (210.8 cm), 26 inches tall (66 cm), and 39 inches deep (99.1 cm). Budget approximately 3.5 feet of floor clearance in front for operator seating.

Q: Will full-depth rack equipment fit in the LH-VLCLS equipment bay?

A: No. Usable rack depth is 19 inches, which rules out full-depth servers and deep UPS units. Plan equipment selection around shallow to mid-depth NVRs, 1U switches, and network appliances rated for 19-inch or shorter depth.

Karl Wilson

The LH-VLCLS is the console I reach for when a customer needs to anchor a multi-operator SOC and wants the equipment rack and the operator workstation consolidated into a single, purpose-built footprint. At 83 inches wide and 9 RU of integrated rack space, this unit eliminates the floor-standing equipment rack that typically sits behind the operator and introduces cable management headaches — everything lives inside the console body within short signal runs.

Technical Highlights:

• 220 lb Weight Capacity: Enough structural margin to carry a full NVR, managed switch, KVM extender, and a 1U UPS simultaneously — and still have headroom when the customer decides to add hardware mid-lifecycle without a console swap.
• 19-inch Usable Rack Depth: Standard EIA compatibility means off-the-shelf rack hardware drops right in, but this is the constraint to communicate clearly upfront — anything deeper than roughly 19 inches will not seat properly, and the customer needs to know that before purchasing a deep-chassis UPS or storage array.
• Fixed 26-inch Working Height: Consistent seated-work ergonomics for shift-based operations environments. The tradeoff is no sit-stand flexibility — if the end-user has ADA requirements or a mixed standing/seated operator population, specify the appropriate height-adjustable VisionLine variant instead.

Deployment Considerations:

• At 308 lbs, this console ships freight-only and requires a mechanical lift or minimum four-person team for positioning — factor installation labor accordingly, and verify raised-access floor point-load ratings if the room uses a modular floor system.
• The LH-VLCLS is not TAA compliant; if this is destined for a federal agency or a government contractor subject to TAA procurement rules, it will not pass compliance review — qualify the end-user before quoting.

The LH-VLCLS is the right call for a fixed, high-density security operations center where the design is locked in, the operator population is seated, and the integrator wants all active equipment housed at the workstation rather than in a separate rack room. It is not the right call for flexible, reconfigurable environments or any procurement that touches federal TAA requirements.