Code Blue SLNF0160 IP68 PoE Power Supply with 4G LTE
Overview
The Code Blue SLNF0160 is an industrial-grade power supply designed to deliver PoE (802.3af) power to surveillance infrastructure in environments where standard enclosures won't survive. Built with IP68 rating, this unit handles full dust sealing and submersion — critical for installations near water features, outdoor equipment racks, or anywhere seasonal flooding is a real concern. The 120VAC AC input integrates directly into standard North American facility power. The addition of 4G LTE connectivity means the SLNF0160 can serve dual duty: power delivery plus backup data path when primary network drops.
Key Features
- IP68 Environmental Sealing: Dust-proof and submersible enclosure design. Survives temporary full immersion — no water ingress into the power electronics. If your installation is in a pump station, car wash, or coastal area prone to salt spray and washdown cycles, this rating eliminates a major failure vector.
- 802.3af PoE Output: Standard PoE power delivery at up to 15.4W per port (typical for 802.3af). Sufficient for most mid-range IP cameras, access control readers, and compact thermal units. No separate power injectors needed; one cable per device.
- 120VAC AC Input: Direct connection to facility mains (North American standard). No DC converter stage required on-site — power is delivered as-is from your electrical service. Simplifies panel integration and reduces component count.
- 4G LTE Cellular Backup: Integrated modem provides out-of-band connectivity when primary Ethernet is down. Critical for remote outdoor sites where fiber or copper runs are single points of failure. LTE ensures alarm signals and health checks reach the NOC even if field wiring is cut or flooded.
- Paging Amplifier Support: The SLNF0160 accommodates a 12-24V DC paging amplifier circuit, enabling synchronized audio alerts across multiple outdoor speakers. Useful for coordinated emergency announcements or facility-wide notifications tied to access events.
- Stainless Steel Enclosure (SS): Corrosion-resistant housing rated for coastal, high-humidity, or chemically aggressive environments. Stainless eliminates rust staining on adjacent equipment and extends operational life in salt air or spray zones.
Integration & Compatibility
The SLNF0160 integrates into surveillance and access control networks via standard PoE delivery. The 802.3af output is compatible with any device designed for passive or active PoE injection — no proprietary connectors or firmware dependencies. The integrated 4G LTE modem operates independently of the power circuit, meaning network failover does not interrupt power to cameras or door controllers. For multi-site deployments, the LTE gateway functionality can be centrally managed through carrier-provided cloud platforms or on-premises VPN appliances.
What's in the Box
Package contents not specified in available documentation. Contact the manufacturer or your distributor for exact assembly contents and cable configurations.
Frequently Asked Questions
Q: Is the SLNF0160 suitable for outdoor installations?
A: Yes. The IP68 rating and stainless steel enclosure make it suitable for outdoor equipment racks, wall-mounted pole installations, and areas subject to rain, washdown, or seasonal flooding. Confirm mounting location can support the unit's weight and provide adequate ventilation if ambient temperature exceeds 50°C.
Q: What devices can the 802.3af PoE output power?
A: Any PoE device rated for 802.3af (up to 15.4W). This includes most fixed IP cameras, wireless access points, VoIP phones, card readers, and small PTZ units. Devices requiring PoE+ (802.3at, 30W) or PoE++ (802.3bt, 90W+) will not operate — verify your camera's power budget before purchase.
Q: Does the 4G LTE modem require a separate cellular subscription?
A: Yes. The SLNF0160 includes the modem hardware; you provision it with a carrier SIM card and active data plan. This allows centralized monitoring and failover routing for sites with unreliable primary connectivity.
Q: Can the paging amplifier circuit run independently of PoE power delivery?
A: The paging amplifier operates on its own 12-24V DC circuit. It can be integrated into your access control or alarm system for synchronized announcements without competing for PoE bandwidth to cameras.
Q: Is the SLNF0160 NDAA Section 889 compliant?
A: Compliance status for this model has not been verified. If NDAA compliance is a contract requirement, confirm directly with Code Blue or your procurement contact before committing to this unit.
The SLNF0160 fills a specific gap: outdoor surveillance power that survives environmental abuse without a secondary UPS or redundant wiring run. The IP68 sealing combined with stainless steel construction addresses two real pain points I see in field installations — corrosion failures in coastal or wet environments, and water ingress during seasonal flooding or washdown cycles. The 4G LTE modem means you're not betting your entire remote site on a single Ethernet run.
Technical Highlights:
- IP68 Enclosure Rating: Full submersion tolerance eliminates the need for secondary drainage or elevated mounting. In pump stations, parking garages prone to pooling, or coastal installations, this is the difference between a unit lasting 5 years and 10+ years without catastrophic failure.
- 802.3af PoE Output: 15.4W per port is sufficient for most fixed cameras and access control readers. The limitation is real — high-power PTZ units or thermal cameras will not work. Know your camera power envelope before you order.
- 4G LTE Backup Connectivity: Independent cellular modem means alarm signals, health checks, and video streams route to the NOC even when your primary Ethernet link fails. Not a replacement for primary network, but a genuine redundancy layer for remote unmanned sites.
Deployment Considerations:
- The 120VAC AC input assumes facility power is available on-site. If your deployment is truly off-grid, you'll need a separate solar or generator solution upstream.
- The paging amplifier 12-24V DC circuit is a secondary feature — don't assume it will handle high-power outdoor horns without external relay logic and amplification. Confirm speaker impedance and wattage requirements with your access control integrator.
Position the SLNF0160 for remote outdoor camera installations where Ethernet redundancy and environmental durability are non-negotiable — parking structures, unmanned gateways, coastal facilities, or any site where a standard PoE injector will corrode or fail after a season or two.
