Wasp

Wasp · 633809000515

Wasp 633809000515 Wasp DR2 Single Slot Dock USB Cable

• USB connectivity enables simultaneous power delivery and data transfer via one cable.
• Purpose-built for the Wasp DR2 Single Slot Dock, ensuring proper fit and electrical match.
• Drop-in replacement minimizes scanner downtime in high-cycle retail or warehouse deployments.

Wasp · 633808929633

Wasp 633808929633 Wasp PS2 Cable WLS9600/WDI4600 6FT Strt

• Six-foot straight PS2 cable provides adequate reach for fixed-position scanner installs.
• Engineered specifically for WLS9600 and WDI4600, ensuring reliable PS2 handshake with no drivers.
• Straight connector format suits open-rack deployments; plan routing if rear clearance is limited.

Wasp · 633808920043

Wasp 633808920043 Wasp WWS800 Series Recharge/Comm Base

• Charges and syncs WWS800 terminals simultaneously from a single dock unit.
• Supports USB or Ethernet connectivity, configurable to match your backend infrastructure.
• Standard AC input requires no special power infrastructure, simplifying multi-site deployment.

Wasp · 633808551360

Wasp 633808551360 Wasp WWS450H RS232 Cable For Base

Wasp · 633808551353

Wasp 633808551353 Wasp WWS450 RS232 Cable For Base

• RS-232 serial interface connects WWS450 base to legacy control systems without adapters.
• Purpose-built pinout matches WWS450 base station, eliminating rewiring or signal mismatches.
• Supports serial integration in warehouses and access control environments using mature RS-232 infrastructure.

Wasp · 633808551230

Wasp 633808551230 Wasp B1100 Silver Bio Clock Poe Convertr

• Powers the B1100 biometric clock via 802.3af PoE, eliminating a dedicated AC supply.
• Single Cat5e or better cable carries both data and power to the clock location.
• Inline converter installs between PoE switch port and clock with no special tools required.

Wasp · 633808551179

Wasp 633808551179 Poe Injector 48V For B2000 Clocks

• Delivers 48V over standard RJ-45 Ethernet, eliminating dedicated AC runs to B2000 clocks.
• Factory-matched for Wasp B2000 series, ensuring validated compatibility without cross-model risk.
• Compact form factor installs on desk, shelf, or wall near the switch to minimize closet footprint.

Wasp · 633808551131

Wasp 633808551131 Universal Pwr Supply B1100/B2000 Bio Clk

• Direct replacement for B1100 and B2000 biometric clock power adapters — no converters needed.
• Keyed output connector prevents reverse insertion, reducing mis-wiring risk during installation.
• Single SKU covers both B1100 and B2000 models, simplifying procurement for multi-site deployments.

Wasp · 633808551070

Wasp 633808551070 Wasptime RFID Badges Seq 401-450

• 50 pre-numbered 125 kHz proximity badges (seq 401–450) eliminate manual encoding at deployment.
• PVC card with slot punch supports standard badge reels, lanyards, and ID holders out of the box.
• Ready to register immediately in WaspTime; no initialization or field programming required.

Wasp · 633808551063

Wasp 633808551063 Wasptime RFID Badges Seq 351-400

• Pack of 50 pre-sequenced RFID badges (351–400) eliminates manual ID assignment.
• Read-only badge credentials mean all access management stays centralized in Wasptime software.
• Compatible with all Wasptime RFID readers; no firmware changes required for standard deployments.

Wasp · 633808551056

Wasp 633808551056 Wasptime RFID Badges Seq 301-350

• 50 pre-numbered RFID cards (Seq 301–350) streamline roster assignment at deployment.
• Factory-programmed for Wasptime terminals, ensuring consistent read rates across your fleet.
• Sequential numbering simplifies asset tracking and reduces manual clock-in errors.

Wasp · 633808550974

Wasp 633808550974 Wasptime Barcode Badges Seq 451-500

• Pre-sequenced 451–500 eliminates badge ID conflicts when expanding an existing deployment.
• No configuration required; badges are immediately recognized by WaspTime terminals on distribution.
• 50-badge PVC pack with slot punch supports direct lanyard or clip attachment for daily employee use.

Wasp · 633808471552

Wasp 633808471552 Wasp Replacement Ps WRP8055 Receipt Prnt

• Direct-fit replacement restores reliable power to WRP8055 receipt printers.
• Eliminates downtime caused by aging or failed original power supply units.
• Model-specific design ensures correct connector fit; verify WRP8055 before ordering.

Wasp · 633808471538

Wasp 633808471538 Wasp POS Cash Drw Lid Only Tray (197066)

• Factory-new lid tray (part 197066) restores hinge alignment and latch integrity.
• Drop-in swap requires no special tools, minimizing POS station downtime.
• Replaces only the worn component, preserving the existing drawer base investment.

Wasp · 633808471491

Wasp 633808471491 Wasp Replacements Lock/Keys (2) For Cash

• Replaces worn or lost lock hardware without requiring full cash drawer replacement.
• Includes one lock assembly and two keys, covering immediate and backup access needs.
• Tool-free installation minimizes downtime during POS maintenance or key recovery.

Wasp · 633808471477

Wasp 633808471477 Wasp POS USB Hardware System Tds (RX30)

• USB hardware interface for Wasp TDS (RX30) POS platform
• Bridges scanners and peripherals into the POS system
• Plug-and-play integration with no driver configuration

Wasp · 633808403935

Wasp 633808403935 Wasp WPL25/WHC25 8"x0.75" Infant Bnd Wht

• 8" × 0.75" polyester labels sized for infant wrists without restricting circulation.
• 400 wristbands per box (2 rolls × 200) reduces reorder frequency in continuous care units.
• White polyester construction resists sanitizer, moisture, and handling in clinical environments.

Wasp · 633808403874

Wasp 633808403874 Wasp Line Cord Us Print/Poe

• Delivers power and network data over a single PoE connection, reducing cable runs.
• US-spec termination suits standard wall outlets in warehouse and logistics deployments.
• Verify printer supports PoE input and match switch/injector wattage before install.

Wasp · 633808403867

Wasp 633808403867 Wasp WPL25/WHC25 Power Supply

• OEM-spec replacement maintains warranty compliance for WPL25 and WHC25 devices.
• Restores full device functionality and battery charging with correct voltage tolerances.
• Stock as a spare unit to eliminate downtime during field or fixed-workstation deployments.

Wasp · 633808402983

Wasp 633808402983 Wasp 4X2 Dt Paper Label 3000/R 8OD 4/C