Posiflex products
-
Posiflex
SKU: 36394022000
Posiflex 36394022000 Module Wi-Fi M.2 WF660 7265 Hc/Rt V2
- M.2 form-factor install eliminates external adapters and frees USB ports on the terminal.
- Adds 802.11 Wi-Fi via Intel WF660 7265 chipset for proven enterprise WLAN compatibility.
- Integrates with standard Windows and Linux Wi-Fi stacks; no third-party drivers required.
$69.00 $68.99 Save $0.01The item has been added -
Posiflex
SKU: 36394011000
Posiflex 36394011000 WiFi / BlueTooth module for RT
- Adds WiFi and Bluetooth to RT-series terminals without external dongles or adapters.
- Plug-in module mounts within the terminal chassis, preserving compact counter footprint.
- Enables cable-free deployment on mobile carts and kiosk installs where ethernet is impractical.
$97.00 $54.99 Save $42.01The item has been added -
Posiflex
SKU: 36324006000
Posiflex 36324006000 Panel Touch 15" Abon Tp
- 15-inch touch panel integrates directly with ABON TP8000 and XP3315 terminals.
- Draws power and data from the host terminal's internal bus—no external cabling needed.
- Drop-in replacement module; mounting points match TP8000/XP3315 chassis geometry.
$198.00 $189.99 Save $8.01The item has been added -
Posiflex
SKU: 36282041000
Posiflex 36282041000 Panel Touch Fuj 15" TP5 (N07/G01)
- 15-inch touch panel replaces or upgrades existing Posiflex TP5 terminals directly.
- Designed specifically for TP5 N07/G01 variants—verify config before ordering.
- Integrates with TP5 power and signal architecture; no external power supply needed.
$267.99The item has been added -
Posiflex
SKU: 36282000010
Posiflex 36282000010 Fan Cpu With Heat Sink TP5800
- Integrated fan and heat sink assembly maintains stable CPU clocks under sustained load.
- Designed specifically for Posiflex TP5800 series terminals, ensuring precise mechanical fit.
- Reduces thermal shutdown risk in high-throughput environments above 25°C ambient.
$22.99The item has been added -
Posiflex
SKU: 36274008103
Posiflex 36274008103 Front Cover For 15" Term.w/ Blue LED &
- Direct-fit bezel replacement for 15" TP80/TP83 terminals; no firmware changes needed.
- Integrated blue LED harness connects to existing logic board connector for status feedback.
- Field-serviceable install in 5–10 minutes using standard fasteners; no soldering required.
$25.99The item has been added -
Posiflex
SKU: 36024001003
Posiflex 36024001003 Base Universal For Gen 4 25HARD Drive
- Universal fit eliminates compatibility guesswork across all Posiflex Gen 4 POS terminals.
- Supports both 2.5" SATA HDDs and SSDs, covering varied storage configs in one base.
- Die-cast metal/steel construction delivers vibration-resistant mounting in high-traffic sites.
$180.55 $179.99 Save $0.56The item has been added -
Posiflex
SKU: 35654021000
Posiflex 35654021000 WIFI/antenna kit for XT model terminals
- Adds wireless connectivity to XT, HS35, and HC terminals without firmware changes.
- Connects via the terminal's dedicated accessory port — no tools or adapters required.
- Network configuration handled through the terminal's standard admin menu post-install.
$62.00 $61.99 Save $0.01The item has been added -
Posiflex
SKU: 34202000030
Posiflex 34202000030 Hard Drive Installation Kit 2.5" 40G Kv
- Bundles mechanical and electrical components for a complete 2.5" 40GB drive install.
- Reduces on-site assembly time and minimizes compatibility issues during commissioning.
- Designed for Posiflex systems supporting 2.5" form-factor drives; verify model before ordering.
$235.99The item has been added -
Posiflex
SKU: 33186023005
Posiflex 33186023005 FS100EK - Base Only
- Base-only config avoids redundant component costs in retrofit or phased deployments.
- Die-cast metal and steel construction supports durable, continuous commercial POS use.
- Desk-stand mount integrates directly with Posiflex FS100EK terminals and FS-series accessories.
$249.00 $199.99 Save $49.01The item has been added -
Posiflex
SKU: 23119800910
Posiflex 23119800910 Memory 8G DDR3 1600MHZ 204PIN 135V V2
- 8GB DDR3 1600MHz capacity handles concurrent POS, payment, and inventory workloads.
- 1.35V low-voltage design limits heat buildup in enclosed, ventilation-restricted terminal chassis.
- 204-pin SO-DIMM format with Posiflex-validated timing profiles eliminates compatibility guesswork.
$66.00 $65.99 Save $0.01The item has been added -
Posiflex
SKU: 23119800901
Posiflex 23119800901 Memory 8G DDR3 1600MHZ 204PIN 135V
- 8GB DDR3-1600 capacity handles concurrent POS apps and Windows workflows without throttling.
- 1.35V low-voltage design limits heat buildup in fanless, enclosed terminal enclosures.
- 204-pin SO-DIMM form factor is spec-matched to Posiflex terminal BIOS and chipsets.
$105.55 $104.99 Save $0.56The item has been added -
Posiflex
SKU: 23119400901
Posiflex 23119400901 Memory 4G DDR3 So KS67/69/72/TP83/TX V.2
- 4GB DDR3 SO-DIMM handles concurrent access control, badging, and camera client workloads.
- Factory-validated for Posiflex KS67/TP83 series, eliminating compatibility guesswork on deployment.
- SO-DIMM form factor installs directly into compact Posiflex POS and kiosk enclosures.
$83.33 $82.99 Save $0.34The item has been added -
Posiflex
SKU: 23119100900
Posiflex 23119100900 TP83/TX3 Memory Upgrade 1GB DDR3 Sodimm
- Purpose-built 1GB DDR3 SO-DIMM upgrade ensures compatibility with TP83 series terminals.
$41.66 $40.99 Save $0.67The item has been added -
Posiflex
SKU: 21973212251
Posiflex 21973212251 Adapter Power 12V/50W KS6810/12 V.4
- OEM 12V/50W output matches KS6810 input spec, eliminating overvoltage risk.
- External form factor allows field swap without opening the terminal enclosure.
- 50W headroom sustains processor, display, and peripherals under full load.
$40.00 $39.99 Save $0.01The item has been added -
Posiflex
SKU: 21973212242
Posiflex 21973212242 Adapter Power 12V/50W KS6810/12
- Delivers 12V DC / 50W output, preventing brownouts during full KS6810 operation.
- Purpose-built for KS6810-series POS terminals, eliminating compatibility guesswork.
- Stocking spare units cuts replacement time during hardware failure in multi-unit sites.
$85.00 $84.99 Save $0.01The item has been added -
Posiflex
SKU: 21973212240
Posiflex 21973212240 Power Supply 12V DC/50W For KS6812
- Delivers 12V DC / 50W output sized precisely for sustained KS6812 operation.
- Purpose-built for Posiflex KS6812, eliminating compatibility guesswork on deployment.
- Stock as a spare unit to restore terminal power quickly and avoid checkout downtime.
$85.00 $84.99 Save $0.01The item has been added -
Posiflex
SKU: 21973212101
Posiflex 21973212101 Power Supply 12V DC/120W for XT4015/XT53
- 12V DC 120W power supply for Posiflex XT4015/XT53 terminals
- OEM replacement for Posiflex POS power systems
- Sufficient capacity for terminal and peripheral support
$135.00 $134.99 Save $0.01The item has been added -
Posiflex
SKU: 21973012151
Posiflex 21973012151 Adapter Power 12V AC 25W Crx/Pdx
- Supplies stable 12V AC at 25W, matching CRX and PDX pole display input specs exactly.
- Direct OEM replacement eliminates compatibility risk during POS station repair or expansion.
- USB connectivity supports integration into existing terminal wiring without added converters.
$17.00 $16.99 Save $0.01The item has been added -
Posiflex
SKU: 21972151126
Posiflex 21972151126 Adapter Power 150W Edac TP8/KS17
- 150W rated output sustains full load across terminal and all connected peripherals.
- EDAC proprietary connector ensures secure, correct mating with TP8 and KS17 terminals.
- Purpose-built replacement unit eliminates compatibility guesswork during depot swap-outs.
$173.00 $172.99 Save $0.01The item has been added