-
Pelco
SKU: WCM3A
Pelco WCM3A Ceiling Bracket with Ball Joint
Ceiling bracket with ball joint for flexible Pelco camera positioning
- Angular adjustment without removing bracket during post-installation aiming
- Compatible with Pelco camera systems for straightforward integration
- NDAA Section 889 compliant for regulated surveillance deployments
Special Order · Ships in 2-3 weeks$87.51 $72.99 Save $14.52The item has been added -
Pelco
SKU: SWM-SW
Pelco SWM-SW Compact Environmental Wall Mount White
Compact white wall mount for Pelco cameras in architecturally sensitive sites
- Weather-rated environmental protection rated for outdoor installations
- RAL9003 pure white finish blends with light facades and stucco
- Compact profile minimizes visual impact and wind loading on structures
Special Order · Ships in 2-3 weeks$86.85 $72.99 Save $13.86The item has been added -
Pelco
SKU: UEBP0AA
Pelco UEBP0AA Parapet Bracket ULISSE EVO
Parapet bracket for ULISSE EVO PTZ cameras with internal cable routing
- RAL9002 powder coat finish resists corrosion in outdoor flat-roof installations
- Internal cable channels route power and communications through bracket body
- NDAA Section 889 compliant for government and institutional deployments
Special Order · Ships in 2-3 weeks$85.00 $70.99 Save $14.01The item has been added -
Pelco
SKU: WCWG2B_FLIR
Pelco WCWG2B_FLIR Corner Mount FLIR Custom Color
90-degree corner mount for Pelco cameras with FLIR custom color
- Converts flat-surface wall mounts to inside or outside 90-degree corners
- WCWGC series design supports larger brackets and heavier camera assemblies
- FLIR custom color finish for color-matched mixed Pelco/FLIR deployments
Special Order · Ships in 2-3 weeks$92.50 $70.99 Save $21.51The item has been added -
Pelco
SKU: EWM
Pelco EWM Esprit PTZ Wall Mount
Wall mount for Pelco Esprit PTZ cameras with integrated cable routing
- Direct wall-surface installation with integrated power, communications, and PTZ drive routing
- Engineered to handle continuous pan-and-tilt dynamic loads without degradation
- Requires wall anchor verification; confirm construction rating supports static and dynamic loads
Special Order · Ships in 2-3 weeks$80.00 $66.99 Save $13.01The item has been added -
Pelco
SKU: PTZ-CPNL-G
Pelco PTZ-CPNL-G In-Ceiling Mounting Panel Gray
Gray in-ceiling trim panel for Pelco PTZ camera systems
- Conceals ceiling cutouts with trim ring for flush, finished appearance
- Structural support and cosmetic trim combined in single component
- NDAA Section 889 compliant for government and commercial installations
Special Order · Ships in 2-3 weeks$80.00 $66.99 Save $13.01The item has been added -
Pelco
SKU: WCW2B_FLIR
Pelco WCW2B_FLIR Corner Mount Adapter
Corner mount adapter for Pelco systems in thermal/mixed deployments
- Inside/outside corner positioning with FLIR custom color coordination
- NDAA Section 889 compliant for government and regulated installations
- Integrates with Pelco WCW mounting interface for secure bracket alignment
Special Order · Ships in 2-3 weeks$83.00 $62.99 Save $20.01The item has been added -
Pelco
SKU: PA101-SW
Pelco PA101-SW Pole Mount Adapter White 1.5in
Pole mount adapter for Pelco cameras, 1.5in poles, tool-free install
- Tool-free strap installation—no drilling or permanent fasteners required
- White finish integrates with light-colored poles and structures
- Compatible with Pelco Camera Systems, NDAA Section 889 and TAA compliant
Special Order · Ships in 2-3 weeks$74.57 $62.99 Save $11.58The item has been added -
Pelco
SKU: WSFPA
Pelco WSFPA Pole Mount Adapter 65-140mm
Non-drilling pole mount adapter for 65–140mm diameters
- Quick-release clamp design requires no fasteners or drilling
- Compatible with Pelco WSFP mount series camera systems
- Fits light poles, utility poles, and structural columns
Special Order · Ships in 2-3 weeks$73.46 $61.99 Save $11.47The item has been added -
Pelco
SKU: NPTA-1201
Pelco NPTA-1201 1.5 NPT Pipe Adapter
1.5" NPT pipe adapter for Pelco pendant mount camera systems
- Female-to-female coupling threads standard 1.5" NPT connections
- OEM Pelco component for secure fit in surveillance installations
- NDAA Section 889 compliant for government and critical infrastructure
Special Order · Ships in 2-3 weeks$70.00 $58.99 Save $11.01The item has been added -
Pelco
SKU: VB-400-VF-MOL2
Pelco VB-400-VF-MOL2 Double MOLLE Mount
Double-row MOLLE mount for Pelco VB-400-VF fisheye cameras
- Dual-row MOLLE attachment secures to tactical vests, vehicle panels, and equipment rails
- Lightweight durable construction rated for field deployment and mobile surveillance
- NDAA Section 889 and TAA compliant for government procurement
Special Order · Ships in 2-3 weeks$70.00 $58.99 Save $11.01The item has been added -
Pelco
SKU: CBLKT-1001
Pelco CBLKT-1001 Replacement Cable Kit
OEM replacement harness for Pelco multi-directional modular cameras
- Factory-matched connector pinout and wire gauge for seamless compatibility
- Restores internal electrical connections damaged during sensor repositioning
- NDAA Section 889 compliant for U.S. government surveillance deployments
Special Order · Ships in 2-3 weeks$76.80 $64.99 Save $11.81The item has been added -
Pelco
SKU: OCTEXA1/2C
Pelco OCTEXA1/2C Armored ATEX Cable Gland
1/2 NPT armored cable gland with ATEX certification for hazardous locations
- Dual-grip design secures both armor layer and jacket for proper strain relief
- ATEX/IECEx/EAC certified for explosion-proof enclosures in classified areas
- Mechanical protection engineered specifically for armored cable installations
Special Order · Ships in 2-3 weeks$72.17 $60.99 Save $11.18The item has been added -
Pelco
SKU: SRXV2-FCMNT-1002
Pelco SRXV2-FCMNT-1002 In-Ceiling Mount
Flush in-ceiling mount for Pelco SRXV2 dome cameras, NDAA compliant
- Recessed design integrates camera flush with ceiling for clean architectural look
- OEM-engineered geometry interface built specifically for SRXV2 indoor dome cameras
- NDAA Section 889 compliant for federal and government installations
Special Order · Ships in 2-3 weeks$65.00 $54.99 Save $10.01The item has been added -
Pelco
SKU: OHEPS01B
Pelco OHEPS01B OHE Power Supply 12Vdc
12Vdc power supply for Pelco OHE outdoor housings, 100–240V input
- Universal AC input (100–240 Vac, 50/60 Hz) with no voltage selector needed
- 12Vdc output for Pelco outdoor housing accessories and surveillance deployments
- NDAA Section 889 compliant for government and enterprise procurement
Special Order · Ships in 2-3 weeks$64.97 $54.99 Save $9.98The item has been added -
Pelco
SKU: OMPXSPA
Pelco OMPXSPA Replacement Wiper Blade for MPX Housing
OEM wiper blade for Pelco MPX housings; engineered rubber for rain and condensation
- Genuine replacement part with engineered geometry matched to MPX window curvature
- Rubber construction resists UV and temperature cycling for sustained clarity
- NDAA Section 889 compliant and TAA-eligible for federal surveillance deployments
Special Order · Ships in 2-3 weeks$64.09 $53.99 Save $10.10The item has been added -
Pelco
SKU: WCWA
Pelco WCWA Corner Mount Adaptor Bracket
Corner mount adaptor for L-shaped spaces and building angles
- Designed for Pelco wall bracket systems in interior and exterior corners
- IP66-rated professional-grade construction for commercial surveillance
- NDAA Section 889 compliant for government and secure deployments
Special Order · Ships in 2-3 weeks$63.90 $53.99 Save $9.91The item has been added -
Pelco
SKU: SWM-SR
Pelco SWM-SR Dome Wall Mount Light Gray
Surface-mount wall bracket for Pelco dome cameras, light gray finish
- Integrated cable routing through mount body for clean professional appearance
- NDAA Section 889 and TAA compliant for government and GSA Schedule projects
- Compatible with Pelco dome camera systems; verify model before ordering
Special Order · Ships in 2-3 weeks$63.44 $52.99 Save $10.45The item has been added -
Add to Cart The item has been addedPelco
SKU: KF-MAGMOUNT2
Pelco KF-MAGMOUNT2 Klick Fast Magnetic Mount
Tool-free magnetic mount for Pelco Klick Fast cameras on steel
- Snap-on attachment to ferrous metal surfaces without fasteners or tools
- Quick reposition and remove for temporary surveillance and event deployments
- Compatible with Pelco camera systems using Klick Fast interface standard
Special Order · Ships in 2-3 weeks$60.00 $52.99 Save $7.01The item has been added -
Pelco
SKU: SRXV-WMP
Pelco SRXV-WMP Wall Mount Sarix Value Pendant Camera
Wall-mount pendant for Sarix Value cameras in corridors and covered areas
- Horizontal arm extension from wall surfaces for non-ceiling installations
- Surface-mount design with IMV-WMJB junction box compatibility for weatherproof cable routing
- NDAA Section 889 compliant for government and regulated deployments
Special Order · Ships in 2-3 weeks$62.33 $51.99 Save $10.34The item has been added
Pelco
PELCO PRODUCTS
Pelco has been engineering enterprise surveillance equipment since 1957 and remains a reference brand for critical infrastructure, transit, gaming, and large-format commercial installations. Pelco's Spectra PTZ platform and Sarix IP camera line set the standard for long-duty-cycle rugged surveillance, now backed by Motorola Solutions' global service network.
We stock the Spectra Enhanced 7 PTZ line, Sarix Professional and Enhanced IP fixed cameras, Sarix Multi Pro multi-sensor, VideoXpert VMS software and storage, plus legacy encoders for analog-to-IP migrations. Every Pelco product ships with Motorola Solutions' manufacturer warranty and access to Pelco's full commissioning and service network. Our engineers help with VideoXpert architecture sizing, PTZ patrol programming, and Sarix series specification for transit, casino, airport, and infrastructure buyers on 20+ year asset cycles.
No bots, just experts
Questions on Pelco? Free pre-sales support from a senior specialist — product questions, BOM quotes, compatibility checks, price confirmation — within one business day. Need full system design? $175/hour (qty 1 = 1 hour). Hardware buyers get up to one hour ($175) credited back.
