HID

HID · 20TKS-03-0086UQ

HID 20TKS-03-0086UQ Card Reader

When you need secure credential presentation with FIPS-validated cryptography in a vandal-resistant package, HID's Signo 20 series delivers

HID · 20NKS-03-016B91

HID 20NKS-03-016B91 Card Reader

When you need FIPS 201-compliant credential management with flexible deployment options, this Signo 20 reader delivers government-grade

HID · 20NKS-03-0086UQ

HID Signo 20 Blk/slvr PIG - 20NKS-03-0086UQ

When you're deploying access control in environments where traditional wiring isn't feasible or you need flexibility during installation, a reader

• Reads iCLASS Seos, MIFARE DESFire, HID Prox, and mobile credentials from one reader.
• OSDP v2 Secure Channel and Wiegand outputs integrate with legacy and modern access panels.
• IP65-rated with optical tamper detection; operates from -31°F to 150°F for varied sites.

HID · 20NKS-00-00UJ95

HID Signo 20 Blk/slvr PIG - 20NKS-00-00UJ95

When your access control deployment demands a compact reader that balances functionality with aesthetic flexibility, the HID Signo 20 delivers a

• OSDP v2 Secure Channel and Wiegand support fits new and legacy panel installs.
• IP65-rated housing operates from -35 to 65 °C for indoor or outdoor deployment.
• Reads iCLASS Seos, MIFARE DESFire, HID Prox, and Apple/Google Wallet credentials.

HID · 20NKS-00-00P6G3

HID Igno 20 Blk/slvr - 20NKS-00-00P6G3

When you're deploying mobile credentials and need a physical backup or bridge solution for mixed-credential environments, the HID Igno 20 delivers a

• Reads 125 kHz and 13.56 MHz credentials plus BLE/NFC mobile access in one reader.
• OSDP v2 Secure Channel and Wiegand outputs support both modern and legacy controller wiring.
• IP65-rated housing operates from -31°F to 150°F for indoor or outdoor deployment.

HID · 20KNKS-00-000000

HID SIGNO20K Mullion 13.56MHZ/125KHZ OSDP/Wiegand - 20KNKS-00-000000

When door frame width is limited but you need full credential flexibility and keypad entry, a mullion reader that doesn't compromise on technology

• Reads 125 kHz and 13.56 MHz cards plus BLE/NFC mobile credentials in one mullion unit.
• OSDP v2 Secure Channel and Wiegand outputs support both encrypted and legacy control panels.
• IP65-rated, -35 to 65 °C operation with backlit 12-key capacitive keypad for two-factor entry.

HID · 20KHTKS-03-0004XR

HID Signo 20K PIV Blk/slvr - 20KHTKS-03-0004XR

When federal agencies, defense contractors, or enterprises with stringent identity verification requirements need PIV/CAC credential support at

• Reads 125 kHz prox and 13.56 MHz smart cards, eliminating multi-reader retrofits.
• OSDP v2 Secure Channel and Wiegand output integrate with new and legacy control panels.
• IP65-rated and PIV/FIPS 201 compliant for indoor or outdoor federal deployments.

HID · 20HNKS-03-00059X

HID 20HNKS-03-00059X PIV Osdp V2

When your access control deployment demands PIV compliance, custom credential programming, and FIPS-grade encryption in a compact form factor, the

HID · 2053HNNMN

HID Iclass KF 32K (16K/2+16K/1) SR Prgmd - 2053HNNMN

When your access control deployment requires multi-application support with pre-configured memory allocation, the HID iCLASS KF 32K delivers

• Factory-programmed 32K memory (16K/2 + 16K/1) eliminates field configuration time.
• Dual application areas with independent security keys segment physical and logical access.
• Rated for -40 to 158°F operation, supporting deployments in harsh environments.

HID · 2053CNNNN

HID Iclass KF 32K (16K/2 + 16K/1) Config - 2053CNNNN

When you're deploying multi-application access systems that need to separate credential data from building-specific applications, you need cards with

• 32K segmented memory (16K/2 + 16K/1) isolates credentials from auxiliary apps on one card.
• 13.56 MHz iCLASS keyfob reads up to 4 inches, compatible with standard iCLASS readers.
• Rated -40 to 158°F; ships pre-configured for immediate deployment in harsh environments.

HID · 2052PNNSN

HID Iclass Keyfob 16K/16, Iclass Prog

N iClass 16K/16 keyfob, factory programmed with iClass credential data

• Ships factory-programmed with your facility code and number range — no in-house programmer needed.
• 13.56 MHz iClass 16K/16 memory supports multi-application credential configurations.
• Keyfob form factor attaches to a key ring, reducing card loss and improving daily carry compliance.

HID · 2052PNNMN

HID Iclass Keyfob 16K/16 Iclass Prog - 2052PNNMN

When you need flexible, high-security credentials for access control deployments where card-based readers aren't practical or users need a compact

• 16K/2K byte memory with 16 app areas supports multi-function credential consolidation.
• 13.56 MHz iCLASS contactless with mutual authentication ensures encrypted reader sessions.
• Rated -40 to 158°F; withstands harsh environments in daily keychain deployments.

HID · 2052PNNAN

HID Iclass Keyfob 16K/16 Iclass Prog - 2052PNNAN

When you're deploying multi-application access control environments and need secure, flexible credentials that end users won't leave on their desk

• 16K-bit memory across 16 app areas enables multi-app consolidation on one credential.
• 13.56 MHz contactless iCLASS technology delivers read ranges up to 4 inches hands-free.
• Rated -40 to 158°F; survives keyring and environmental wear in commercial deployments.

HID · 2052CNNNN

HID Iclass KF 16K/16 Configured Non-prgmd - 2052CNNNN

When deploying medium-to-large access control systems that require consistent credential formatting across multiple sites or phased rollouts

• Factory-configured key structure eliminates encoding setup errors across distributed teams.
• 16KB memory with 16 application areas supports multi-tenant and segmented access deployments.
• Non-programmed credential allows site-specific encoding while preserving consistent key architecture.

HID · 2001HPGGMB

HID 2001HPGGMB 16K SR Prog.

• 16KB dual-application memory supports parking, vending, and T&A on one card.
• 13.56 MHz iCLASS technology integrates directly with existing HID reader infrastructure.
• Dual slot indicators reduce misread errors at mixed vertical/horizontal reader installs.

HID · 1597LGGAV

HID 1597LGGAV Smart Card Reader

When you're managing multi-technology access deployments that need to bridge legacy prox readers with modern smart card infrastructure, credential

• Dual 125 kHz prox + smart chip contact lets legacy and upgraded readers coexist.
• 26-bit H10301 format ensures drop-in compatibility with existing HID prox infrastructure.
• Vertical slot punch and CR80 body allow immediate deployment in current badge holders.

HID · 1597LGGAN

HID 1597LGGAN Smart Card

When your access control deployment requires credential flexibility without the durability compromises of PVC-only cards, composite construction

• Composite polyester/PVC body resists breakage under daily high-traffic reader use.
• 125 kHz Prox + smart chip contact on one card supports legacy and future readers.
• Laser-engraved serial numbers and no slot punch preserve structural integrity long-term.

HID · 1431LGGZNM

HID Mifare Prox Non-prog Mifare Prog Prox - 1431LGGZNM

When you're integrating access control systems that need to bridge legacy proximity hardware with newer Mifare-based platforms, dual-technology

• Dual 125 kHz prox and 13.56 MHz MIFARE Classic 1K in one card enables phased migrations.
• Pre-encoded 26-bit H10301 prox side deploys immediately with existing HID proximity readers.
• Rated -40 to 158°F and dye-sublimation printable for durable, photo-ID-ready badging.

HID · 1431LGGVNM

HID Mifare Prox Non-prog Mifare Prog Prox - 1431LGGVNM

Managing access control systems that bridge legacy proximity and MIFARE technology creates deployment headaches when you need credentials that work

• Operates on both 125 kHz prox and 13.56 MHz MIFARE Classic 1K readers simultaneously.
• Ships pre-encoded with 26-bit H10301 format; MIFARE sector is field-programmable for custom data.
• CR80 PVC composite form factor supports dye-sublimation printing and fits standard badge holders.

HID · 1431LGGUVM

HID Mifare Prox Non-prog Mifare Prog Prox - 1431LGGUVM

When you're managing a multi-technology access control deployment with both legacy proximity readers and newer Mifare systems, credential management

• Dual 125 kHz / 13.56 MHz operation lets one card serve both legacy Prox and MIFARE readers.
• Fixed 26-bit H10301 Prox side preserves existing facility codes with no reprogramming required.
• Dye-sublimation print capability supports on-site photo ID badging in standard CR80 format.