Axis TQ1804-E Spare Top Cover with Wiper - 02193-001

Axis 02193-001 Spare Top Cover with Wiper

Overview

The Axis TQ1804-E (model 02193-001) is a spare top cover assembly with an integrated wiper blade designed to maintain optical clarity on outdoor pan-tilt-zoom cameras operating in wet or dusty environments. This accessory addresses the core deployment problem: lens fouling from rain, snow, salt spray, or airborne debris that degrades image quality on active surveillance systems. The wiper mechanism clears accumulated moisture or particulates without requiring manual intervention, keeping the camera's optics usable during continuous outdoor operation.

Compatibility

The 02193-001 is designed for the Axis Q1656-LE outdoor PTZ camera. Verify compatibility with your exact camera model before ordering, as spare covers are model-specific and will not fit other Axis camera series or non-Axis equipment. Contact the manufacturer or your integration partner if you need confirmation for a particular installation.

Installation Notes

This spare cover is a direct mechanical replacement — no wiring or electronics involved. Remove the existing top cover from your Q1656-LE by unbolting it from the pan-tilt head, then install the 02193-001 using the same bolt locations. Ensure the wiper blade mechanism is clear of obstructions before deployment. The wiper does not require power or network connectivity; it operates passively or is actuated by the camera's built-in wiper motor (verify your camera model's wiper control method). Install only during camera downtime or after disabling recording on affected channels to avoid false-alarm triggers during cover swap.

What's in the Box

• 1x Axis TQ1804-E Spare Top Cover with integrated wiper blade
• Mounting hardware
• Installation instructions