APC by Schneider Electric 0J-0M-77876 Front Panel Assembly for Smart-UPS Lion Rack Mount
Overview
The 0J-0M-77876 is the factory replacement front panel assembly designed for APC Smart-UPS Lion 2200VA and 3000VA rack-mount UPS units. When a front panel is cracked, damaged, or missing key interface elements after a rack move or hardware incident, this assembly restores the unit to factory condition without requiring a full UPS replacement — a practical call in data centers and server rooms where Smart-UPS Lion units are already integrated into the power chain.
Weighing just 0.70 lbs, the panel fits the existing rack-mount chassis without structural modification. It meets RoHS (Restriction of Hazardous Substances) compliance, which matters for facilities with environmental purchasing mandates or for deployments in regions where RoHS conformance is a procurement requirement.
If you're managing an APC by Schneider Electric UPS fleet, keeping spare front panels on hand for your 2200VA and 3000VA rack units reduces downtime when cosmetic or functional panel damage occurs. Browse the full UPS accessories catalog for related components and replacement parts.
Key Features
- Direct-Fit for 2200VA and 3000VA Models: Engineered specifically for the Smart-UPS Lion 2.2K and 3K rack-mount form factor — no modification required. Using the correct OEM replacement avoids fit issues that can leave gaps in the front bezel and compromise airflow or panel integrity.
- RoHS Compliant: Meets the Restriction of Hazardous Substances directive, keeping your parts inventory aligned with environmental compliance requirements. For facilities running green procurement policies or operating in EU-regulated markets, this is a non-negotiable attribute on replacement components.
- Rack-Mount Form Factor: Designed for standard rack integration consistent with the Smart-UPS Lion chassis. No additional brackets or adapters needed — the panel installs directly into the existing unit housing.
- Lightweight at 0.70 lbs: Easy to stage and swap in the field. A technician can carry multiple units in a service kit without adding meaningful weight — useful during multi-rack preventive maintenance rounds.
- UNSPSC Classified (31162308): Properly classified for procurement systems using UNSPSC commodity codes, simplifying PO creation in enterprise ERP environments that require standardized part categorization.
Integration and Compatibility
The 0J-0M-77876 (often searched as 0J 0M 77876) is compatible with Smart-UPS Lion 2200VA and 3000VA rack-mount models. Verify your UPS model number before ordering — this panel is not interchangeable with tower-form-factor Smart-UPS units or with 1000VA/1500VA rack units that use a different chassis width or bezel profile. If you are sourcing rack-mount UPS systems or evaluating a broader power protection refresh, confirm chassis compatibility with your existing fleet first. For service planning on large UPS deployments, our UPS selection guide covers capacity sizing and replacement part considerations.
Frequently Asked Questions
Q: Which UPS models is the 0J-0M-77876 front panel compatible with?
A: This front panel assembly is designed for APC Smart-UPS Lion 2200VA and 3000VA rack-mount units. It is not compatible with tower models or other VA ratings in the Smart-UPS line.
Q: Is the 0J-0M-77876 RoHS compliant?
A: Yes. The 0J-0M-77876 meets RoHS (Restriction of Hazardous Substances) compliance requirements.
Q: What does this assembly weigh and does it require any tools or adapters to install?
A: The panel assembly weighs 0.70 lbs. It is designed as a direct-fit replacement for the Smart-UPS Lion 2.2K/3K rack-mount chassis — no additional adapters or brackets are required.
Q: Can this front panel be used on a tower-form Smart-UPS unit?
A: No. This panel is specific to the rack-mount form factor of the Smart-UPS Lion 2200VA and 3000VA. Tower-form units use a different chassis and bezel profile.
Q: Is the 0J-0M-77876 a genuine APC replacement part?
A: Yes. This is a factory-new, genuine APC by Schneider Electric replacement panel assembly sourced through commercial supply channels — no grey-market or parallel imports.
The 0J-0M-77876 is one of those parts that doesn't get ordered until something goes wrong — and when it does, the 0.70 lb weight and direct-fit rack-mount design mean a technician can swap it in without pulling the UPS from service or scheduling a maintenance window. The RoHS compliance detail matters more than people expect: if your facility runs an EU-directive-aligned procurement policy or you're deploying in a region where RoHS conformance is audited, using a non-compliant replacement bezel can create a documentation gap during an environmental review.
Technical Highlights:
- RoHS Compliance: Meets Restriction of Hazardous Substances requirements — keeps your parts inventory clean under green procurement mandates without requiring a compliance variance for a simple panel swap.
- 0.70 lb Panel Weight: Light enough to stock multiples in a field service kit. For a technician covering a data center floor with 20+ Smart-UPS Lion rack units, carrying two or three spares adds under 1.5 lbs to the kit.
- Rack-Mount Form Factor: Direct-fit for the Smart-UPS Lion 2.2K/3K chassis — eliminates the risk of ordering a bezel that physically fits but leaves gaps around the interface cutouts, which can affect cooling airflow management in dense rack configurations.
Deployment Considerations:
- Verify your UPS model is specifically the Smart-UPS Lion 2200VA or 3000VA rack-mount variant before ordering — Smart-UPS models share branding across VA ratings and form factors, and the wrong panel won't seat correctly.
- This is a cosmetic/structural panel assembly; it does not contain electronics. If your UPS has a failed display or control interface, this panel replacement alone will not resolve those issues — a separate module or service engagement is required.
This part is the right call for data center and server room teams running preventive maintenance programs on Smart-UPS Lion 2.2K/3K rack fleets — stock one per service zone to avoid waiting on parts when a panel gets damaged during a rack audit or equipment move.
