APC Netshelter SX Advanced Rack 42U 800MM 1295MM with Shock Package Black - AR9580SPB2

APC by Schneider Electric AR9580SPB2 NetShelter SX Advanced 42U Rack Enclosure with Shock Package

Overview

The APC by Schneider Electric AR9580SPB2 is a 42U freestanding server rack enclosure from the NetShelter SX Advanced line — engineered for data centers, network closets, and security head-end rooms where equipment density and structural integrity both matter. At 800mm wide and 1295mm deep, it accommodates the full range of modern 19-inch equipment, from shallow patch panels to deep UPS units and high-density compute nodes. The included shock package differentiates this SKU from standard NetShelter SX units: it provides protective packaging and mounting provisions designed to survive transport and site-delivery without racking damage — relevant when deploying into finished facilities or remote sites where re-leveling or transit damage is a real cost.

For security integrators building out NVR head-ends, access control panels, and network distribution points, a properly specified rack is not an afterthought. The AR9580SPB2 delivers the internal volume and load capacity to consolidate everything into a single enclosure without compromising cable management or future expansion.

Key Features

• 42U Capacity: 42 rack units gives you room to build a complete security head-end — NVRs, PoE switches, UPS, patch panels, and access control servers — in one enclosure without planning for a second rack from day one. That's typically 6–8 1U/2U devices plus a mid-size UPS before you're constrained.
• 1927.8 kg Maximum Weight Capacity: At nearly 2 metric tons of rated load, this rack won't become the structural weak point in a dense deployment. High-density NVR arrays with installed hard drives, paired with a full UPS, rarely exceed 400–600 kg — the AR9580SPB2 leaves substantial margin even in fully loaded configurations.
• 800mm Width: The wider 800mm profile (vs. the standard 600mm NetShelter variant) provides meaningful side clearance for cable routing and airflow. Integrators working with thick multi-core copper bundles or high-density fiber runs will appreciate not having to compress cable trays against the rails.
• 1295mm Depth: Deep-format equipment — extended UPS units, storage enclosures, and some high-end NVR chassis — typically require 900mm or more of mounting depth. The 1295mm internal space handles these comfortably, with mounting depth adjustable from 292mm to 1143mm to suit shallow or deep equipment within the same enclosure.
• 29.2cm to 114.3cm Adjustable Mounting Depth: Rail positions are adjustable across a 292mm–1143mm range, so a single rack accommodates a mixed population of shallow appliances and deep chassis without shim plates or adapter hardware. That flexibility is worth real time on the installation schedule.
• 1991mm Height: At just under 2 meters, the AR9580SPB2 stands at standard full-height rack dimensions — fits through standard commercial doorways during installation and aligns with most raised-floor data center planning grids.
• Freestanding Design: No wall anchoring required for the rack structure itself, which simplifies placement in leased facilities or spaces where wall penetrations require approvals. Floor-bolt provisions are typically still recommended in seismic zones — verify local requirements.
• Shock Package Included: The shock-package variant addresses a real logistics problem: racks shipped to remote facilities or multi-floor urban sites regularly arrive with rail damage or door-frame warping from freight handling. The protective packaging and shock-absorbing provisions in this SKU reduce the risk of dead-on-arrival enclosures — relevant when re-ordering a replacement rack means a multi-week delay on a project schedule.
• Black Finish: The black (SPB) finish is the standard for modern data centers and security operations centers. It also absorbs less ambient light, which matters in low-light NOC or SOC environments where operators work with multiple screens.

Integration and Compatibility

The AR9580SPB2 accepts standard 19-inch (48.3cm) rack-mount equipment — the universal form factor for network video recorders, managed PoE switches, patch panels, and 1U/2U servers. Adjustable mounting depth means rail position can be set to match equipment depth without additional hardware. APC's NetShelter SX line is designed to accept APC's own power distribution units (PDUs), cable management accessories, and blanking panels, though the enclosure itself is compatible with third-party accessories built to standard 19-inch and EIA-310 specifications.

For security deployments, this enclosure is a natural pairing with APC Smart-UPS or Symmetra-series UPS units for runtime-critical applications, and with APC's own PDU line for per-outlet power monitoring. Infrastructure-level planning should account for the enclosure's 380 kg shipping weight when specifying floor loading for raised-floor or structural-slab installations.

Frequently Asked Questions

Q: What does the