Vertiv VC-FM-0006 12-Inch Aisle Containment Floor Stand
Overview
The Vertiv VC-FM-0006 is a 305 mm (12 in.) floor stand designed for use within Vertiv aisle containment systems. Floor-mounted containment hardware like this serves a straightforward but load-bearing role: it provides the structural base that anchors curtain frames and panels at the floor level, keeping hot and cold aisle separation intact without relying on overhead attachment alone. If your data center containment layout requires a 12-inch floor-mounted riser, this is the component to spec.
The VC-FM-0006 (sometimes searched as VC FM 0006) is sold as a discrete part within Vertiv's FRM accessory line, which means you can add or replace individual floor stand positions without sourcing an entirely new containment kit. This matters in live data center environments where targeted component replacement is preferable to a full-aisle teardown.
Key Features
- 12-Inch (305 mm) floor stand height: The 12 in. dimension sets the vertical offset at the floor interface — match this to your raised floor tile height or gap clearance spec before ordering. Mismatching this dimension is the most common installation error in phased containment builds.
- Component-level replaceability: As a discrete FRM line part, the VC-FM-0006 slots into existing aisle containment infrastructure without requiring full-system replacement — useful when a single floor stand is damaged or when extending an existing row.
- Floor stand form factor: Free-standing floor-mount design eliminates the need for ceiling or overhead rack attachment at the base, making it appropriate for environments where overhead anchoring is restricted or where the containment system must be repositioned periodically.
Integration and Compatibility
This floor stand is part of Vertiv's FRM (Floor-mount) containment accessory family. Confirm compatibility with your specific containment system model and row configuration before ordering — Vertiv's aisle containment product line includes multiple frame widths and panel heights, and floor stand dimensions must match the frame geometry in use. Consult your containment layout drawings or contact Vertiv technical support to verify fit if you are integrating into an existing installation.
Frequently Asked Questions
Q: What does the VC-FM-0006 floor stand do in an aisle containment system?
A: The VC-FM-0006 is a 12-inch (305 mm) floor stand that provides the base-level structural support for Vertiv aisle containment frames and panels. It anchors the containment system at floor level, maintaining hot/cold aisle separation without requiring overhead ceiling mounts at that point.
Q: What is the height of the VC-FM-0006?
A: The VC-FM-0006 stands 12 inches (305 mm) tall. Verify this matches your raised floor tile height or floor gap clearance before ordering.
Q: Is the VC-FM-0006 compatible with all Vertiv containment systems?
A: The VC-FM-0006 is part of Vertiv's FRM floor-mount accessory line. Compatibility depends on your specific containment frame model and row configuration. Cross-reference your containment system documentation or contact Vertiv to confirm fit before purchase.
Q: Can the VC-FM-0006 be used as a replacement part in an existing installation?
A: Yes — the VC-FM-0006 is sold as a discrete component, so it can replace a damaged or missing floor stand in an existing Vertiv aisle containment row without requiring a full-system replacement.
Q: Is the VC-FM-0006 suitable for raised floor data centers?
A: The 12-inch floor stand height is specifically intended to accommodate floor-level gaps common in raised-floor environments. Confirm the 305 mm dimension aligns with your floor construction before installing.
The VC-FM-0006 is a targeted infrastructure component — a 12-inch (305 mm) floor stand within Vertiv's FRM aisle containment accessory family. It plays a specific structural role: anchoring the containment frame at floor level so the system doesn't depend entirely on overhead or rack-mounted support at the base. Small part, but getting the wrong dimension here means your containment panels won't sit flush, and thermal bypass kills the efficiency gains you installed the system to achieve.
Technical Highlights:
- 12-inch (305 mm) height: The single most important spec to match against your floor construction — raised floor tiles, under-floor cable trays, and plenum clearances all affect what floor stand height you need. The 305 mm dimension is the spec to cross-reference against your facility drawings before cutting a PO.
- FRM line discrete component: Sold as an individual part rather than a kit assembly, so it integrates into in-place Vertiv containment rows for targeted repair or extension without sourcing a full containment package.
- Floor-mount form factor: Free-standing base attachment — no ceiling anchor required at this point in the containment run, which simplifies installation in environments where overhead access is restricted or where the row may need to be repositioned.
Deployment Considerations:
- Verify the 12-inch height against your specific raised floor tile or plenum gap measurement before ordering — this is not an adjustable-height component based on available evidence, so a dimension mismatch requires a different part number.
- Confirm FRM family compatibility with your exact containment frame model. Vertiv's aisle containment line spans multiple frame widths and panel heights; not all FRM accessories are cross-compatible across the full product range.
The VC-FM-0006 is the right call when you're extending or repairing a Vertiv FRM-based containment row in a raised-floor data center and need a discrete 12-inch floor anchor — not a full containment kit, not a different height. Match the dimension, confirm the frame family, and install.
