Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
Code Blue
SKU: CB2A00051
Code Blue CB2A00051 PoE Wall Mount IP68 Security Device
IP68 wall-mount PoE device for dusty and wet outdoor security
- IP68 rating withstands dust, moisture, and full submersion exposure
- PoE 802.3af powered—no dedicated electrical runs required
- Wall-mount design for industrial, commercial, and outdoor installations
$3,500.00 $3,200.99 Save $299.01The item has been added -
Code Blue
SKU: CB2A00054
Code Blue CB2A00054 CB2a 4B Wall Mount
- 0.078" stainless steel construction resists corrosion in demanding indoor/outdoor environments.
- Engineered specifically for CB2a 4B Help Points, ensuring precise fit and operational reliability.
- Wall-mount design supports standard building surfaces, simplifying installation for integrators.
$2,870.00 $2,472.99 Save $397.01The item has been added -
Code Blue
SKU: CB2A00079
Code Blue CB2A00079 PoE Wall Mount Accessory
IP68 PoE wall mount for outdoor surveillance without dedicated power
- PoE (802.3af) powered—no separate electrical infrastructure required
- IP68 rating withstands dust and water immersion in harsh environments
- Wired Ethernet connectivity integrates with standard PoE camera systems
$3,385.00 $3,094.99 Save $290.01The item has been added -
Code Blue
SKU: CB2A00129
Code Blue CB2A00129 2-Sided Emergency Wall Mount
Dual-sided emergency wall mount with PoE power and IP68 weather rating
- NEMA 4 / IP68-rated 0.078" stainless steel enclosure survives outdoor and washdown environments.
- Two-sided beacon configuration provides 360° alert visibility from a single wall mount point.
- Accepts 12–24V AC/DC or PoE input; compatible with LS1000 VoIP and IA4100 analog modules.
$2,900.00 $2,510.99 Save $389.01The item has been added -
Code Blue
SKU: CB2A00205
Code Blue CB2A00205 2-Sided Emergency Wall Mount
Dual-sided wall emergency signage, IP68 rated for indoor/outdoor use
- 2-sided display visible from both directions at entry points and exits
- IP68 weatherproof rating operates reliably in harsh indoor and outdoor conditions
- PoE 802.3af power eliminates need for separate electrical infrastructure
$2,650.00 $2,294.99 Save $355.01The item has been added -
Code Blue
SKU: CB2A00207
Code Blue CB2A00207 2-Sided Emergency Wall Mount
Dual-sided emergency signage with IP68 rating and PoE power
- 2-sided wall-mount design for visible messaging in corridors and stairwells
- IP68-sealed construction handles indoor and outdoor environments
- PoE (802.3af) powered—no dedicated electrical wiring needed
$1,400.00 $1,280.99 Save $119.01The item has been added -
Code Blue
SKU: CB2A00287
Code Blue CB2A00287 PoE Wall Mount Sensor
PoE wall sensor with IP68 rating for outdoor and indoor use
- PoE (802.3af) power eliminates separate power supply runs
- IP68 rating handles wet, dusty, and challenging environments
- Wall-mounted design simplifies integration into security networks
$2,870.00 $2,472.99 Save $397.01The item has been added -
Code Blue
SKU: CB2E00087
Code Blue CB2E00087 4B Brushed Stainless Steel Wall Mount
IP68 brushed stainless steel wall enclosure for outdoor telecom and security
- IP68 dust and water resistance rated for indoor and outdoor deployment
- PoE 802.3af power eliminates separate power wiring during installation
- Brushed stainless steel construction resists corrosion in harsh environments
$2,710.00 $2,477.99 Save $232.01The item has been added -
Code Blue
SKU: CB2E00162
Code Blue CB2E00162 Safety Blue Wall Mount Unit
PoE wall mount with IP68 dust and water protection for outdoor security
- PoE (802.3af) powered—no separate power supply needed at mount point
- IP68-rated enclosure keeps unit operational in dust and moisture-heavy sites
- Safety blue finish wall-mount form factor for discrete indoor/outdoor placement
$2,480.00 $2,267.99 Save $212.01The item has been added -
Code Blue
SKU: CB2E00190
Code Blue CB2E00190 PoE Wall Mount Enclosure
IP68 stainless steel PoE enclosure for coastal and industrial wall mount
- IP68 rating with brushed stainless steel resists salt spray and corrosion
- PoE 802.3af power support for network devices in outdoor deployments
- Compact wall-mount form factor for flexible placement in demanding environments
$2,050.00 $1,774.99 Save $275.01The item has been added -
Code Blue
SKU: CB2E00194
Code Blue CB2E00194 4B Brushed Stainless Steel Wall Mount
IP68 brushed stainless steel 4-bay wall enclosure for outdoor security
- IP68-rated sealed housing protects equipment in coastal and high-moisture environments
- PoE (802.3af) powered—no separate electrical runs required for wall installation
- Corrosion-resistant stainless steel finish suits industrial and harsh-environment deployments
$2,050.00 $1,758.99 Save $291.01The item has been added -
Code Blue
SKU: CB2E00200
Code Blue CB2E00200 PoE Wall Mount Accessory
PoE wall mount with IP68 rating for indoor/outdoor camera systems
- 802.3af PoE powered—no separate power wiring needed at mount point
- IP68 rated for outdoor and high-moisture installation environments
- Wall-mount design compatible with Code Blue surveillance systems
$2,215.00 $2,025.99 Save $189.01The item has been added -
Code Blue
SKU: CB2E00212
Code Blue CB2E00212 Help Point Wall Mount
- 0.078" stainless steel build delivers corrosion resistance for outdoor deployments.
- At 24 lbs, provides structural mass for stable anchoring on walls and pillars.
- Engineered specifically for Code Blue Help Point stations, ensuring fit accuracy.
$3,155.00 $2,884.99 Save $270.01The item has been added -
Code Blue
SKU: CB2E00366
Code Blue CB2E00366 PoE Wall Mount Connector
IP68 wall-mount PoE connector for outdoor security camera installations
- 802.3af PoE eliminates separate power runs at camera mounting points
- IP68 rating withstands dust and water immersion in outdoor environments
- Wall-mounted design integrates network and power connectivity in one unit
$2,300.00 $1,991.99 Save $308.01The item has been added -
Code Blue
SKU: CB2E00461
Code Blue CB2E00461 PoE Wall Mount Accessory
IP68 PoE wall mount for outdoor perimeter security & entry points
- PoE (802.3af) powered—integrates with standard networked infrastructure
- IP68 rated stainless steel (4B) withstands wet, dusty, and submerged zones
- Wall-mount design suits outdoor perimeter installations and access control sites
$2,270.00 $1,955.99 Save $314.01The item has been added -
Code Blue
SKU: CB2E00559
Code Blue CB2E00559 Safety Yellow PoE Wall Mount
IP68 safety yellow PoE wall mount for outdoor security
- IP68-rated housing blocks dust and moisture in exposed environments
- Standard 802.3af PoE power—no separate wiring required
- Wall-mount design integrates with ONVIF video management systems
$2,300.00 $2,102.99 Save $197.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.