Connectivity & Media
Sub categories
Showing Results for Connectivity & Media
-
Hanwha
SKU: PT02-001002B
Hanwha PT02-001002B Waterproof Camera Cable
Waterproof cable for Hanwha outdoor IP camera systems
- Waterproof cable for outdoor Hanwha camera systems
- White finish for clean indoor and outdoor integration
- Moisture-resistant design for wet and humid conditions
$6.73 $5.99 Save $0.74The item has been added -
Hanwha
SKU: SPP-C00402EP
Hanwha RJ45 Push-pull ruggedized Cable 2m (78.74") compatible with TNP-A6550RW, TNP-A7430RW, TNP-A9430RW
$160.00 $159.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-C00405EP
Hanwha RJ45 Push-pull ruggedized Cable 5m (196.85in. ) compatible with TNP-A6550RW TNP-A7430RW TNP-A9430RW
$190.00 $189.99 Save $0.01The item has been added -
Hanwha
SKU: SCL-30
Hanwha SCL-30 3M Extension Cable Remote Head Lens
3-meter remote head lens extension cable for PNM-9000QB and XNB-6002
- Separates lens and camera body up to 3 meters without signal loss
- Plug-and-play installation; no configuration or additional hardware needed
- Works indoors and secure outdoor environments; IP66 and IK10 rated
$95.00 $94.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-C00410EP
Hanwha SPP-C00410EP RJ45 Push-pull Ruggedized Cable
- 10-meter RJ45 push-pull ruggedized Ethernet cable
- Locking connector mechanism for secure cable seating
- PoE 802.3af compatible for power + data over single run
$240.00 $239.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-C08020E
Hanwha SPP-C08020E M12 Ethernet Cable 2M
M12-to-RJ45 cable with PoE++ power and IP68 sealed connectors
- PoE++ (802.3bt) delivers 51W at device for powered cameras in one cable
- IP68-rated M12 connectors seal out dust and moisture in outdoor deployments
- Dual-layer shielding (foil + braid) rejects EMI in industrial environments
$79.10 $78.99 Save $0.11The item has been added -
Hanwha
SKU: SPP-C08050E
Hanwha SPP-C08050E M12 Ethernet Cable 5M
M12-to-RJ45 Ethernet cable, 5M, IP68 rated for outdoor camera networks
- CAT6 S/FTP dual shielded construction handles -10°C to 50°C environments
- M12 8-pin x-coded connector with gold-plated contacts resists corrosion
- 5-meter length supports PoE++ (802.3bt) at 1 Gbps for security cameras
$97.30 $96.99 Save $0.31The item has been added -
Hanwha
SKU: SPP-C08100E
Hanwha SPP-C08100E M12 Ethernet Cable 10M
M12 to RJ45 industrial cable, 10m CAT6 S/FTP with PoE++ support
- IP68-rated for dust and moisture; operates −10°C to +50°C outdoors
- PoE++ (802.3bt) delivers 51W at device for high-power cameras
- CAT6 S/FTP dual shielding with gold contacts; 1 Gbps speed
$116.20 $115.99 Save $0.21The item has been added -
Hanwha
SKU: SPP-C12020P
Hanwha SPP-C12020P M12 Power Cable 2M
2M M12 power cable, IP67-rated for outdoor camera systems
- 12-pin female M12 L-coded connector with gold-plated contacts
- IP67 protection rated for dust and moisture in harsh environments
- 4.6A current capacity, ≥10 million bending cycles for field durability
$79.10 $78.99 Save $0.11The item has been added -
Hanwha
SKU: SPP-C12050P
Hanwha SPP-C12050P M12 Power Cable 5M
5M M12 power cable, IP67 sealed, 50–60VAC rated for industrial cameras
- Female M12 L-coded 12-pin straight connector with gold-plated contacts
- IP67 dust and moisture protection rated for 10M+ bending cycles
- 4.6A max at 80°C with TPU jacket for outdoor and high-vibration use
$97.30 $96.99 Save $0.31The item has been added -
Hanwha
SKU: SPP-C12100P
Hanwha SPP-C12100P M12 Power Cable 10M
10m M12 power cable with IP67 protection for surveillance installations
- IP67-rated L-coded connector handles dust and moisture in outdoor setups
- Gold-plated brass contacts resist corrosion; rated for 4.6A at 50–80VAC
- 10 million bending cycle rating withstands vibration in demanding environments
$116.20 $115.99 Save $0.21The item has been added -
Add to Cart The item has been addedHanwha
SKU: SPP-C1900
Hanwha SPP-C1900 HDMI Cable Pack 3-Pack
3-pack micro-HDMI cables 670mm for Hanwha surveillance camera setups
- Three 26.4-inch micro-HDMI cables per pack with copper coil construction
- Female-to-monitor, male-to-camera connectors for direct camera-to-display links
- Lightweight black cables designed for standard surveillance control room layouts
In stock · Ships same business day$100.00 $99.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-C45W
Hanwha SPP-C45W RJ45 Converting Cable
RJ45 converting cable for Hanwha QNV cameras, 335mm, 5-pack
- RJ45 plug-in to pigtail conversion simplifies field installations
- 335mm cable length enables flexible routing in tight spaces
- Five cables per pack support multi-camera deployments and spares
$67.00 $66.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-C45WA
Hanwha SPP-C45WA RJ45 Converting Cable
RJ45 plugin-to-pigtail converter for Hanwha ANV/LNV dome cameras
- 335mm cable length with copper coil and black plastic sheath for outdoor use
- Pack of 5 cables at 22g each for flexible multi-camera installations
- Compatible with Hanwha ANV and LNV series outdoor dome camera lineup
$67.00 $66.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-C7200
Hanwha SPP-C7200 Audio and Alarm Cable
Audio and alarm cable for QND-C8013R and QND-C8023R dome cameras
- 700mm length with copper coil conductor for stable signal transmission
- 3-piece cable set with plastic sheath rated for indoor environments
- Black connectors for audio and alarm integration on Hanwha camera systems
$50.00 $49.99 Save $0.01The item has been added -
Hanwha
SKU: SPP-E10T
Hanwha SPP-E10T 1TB MicroSD Industrial Memory Card
1TB microSD for surveillance in -40°C to +85°C extremes
- 100MB/s read, 80MB/s write with V30/U3/A2 for continuous recording
- IPx7 water protection rated for outdoor and industrial deployments
- 2686TB endurance rating handles high-cycle security workflows
$1,375.00 $1,029.99 Save $345.01The item has been added
Connectivity & Media
Connectivity and media components support reliable communication between cameras, access control devices, intercom systems, and network infrastructure. Proper cabling and connection hardware ensure stable performance, reduced signal loss, and long-term system reliability.
Plan Your Deployment
- Cable type selection (Ethernet, fiber, coaxial as applicable)
- Distance requirements and signal integrity planning
- Environmental considerations (indoor, plenum, outdoor-rated)
- Connector compatibility and termination standards
- Future expansion and structured cabling design
Connectivity & Media — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 2 working models of connectivity & media sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Type | Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.