Connectivity & Media
Sub categories
Showing Results for Connectivity & Media
-
ELO Touch
SKU: E546861
ELO Touch Replacement Cable KIT FOR 90 Series - E546861
- Genuine OEM cable kit ensures verified compatibility with ELO Touch 90 series displays.
- Complete assembly supports field repair without sourcing individual cables separately.
- Manufacturer warranty path included, simplifying RMA and service documentation.
$57.00 $56.99 Save $0.01The item has been added -
ELO Touch
SKU: E514489
ELO Touch Replacement Cable KIT FOR ELO Backpack FOR - E514489
- Genuine OEM cable kit ensures verified compatibility with ELO Touch backpack hardware.
- Supports 65W power delivery to maintain full backpack system performance post-repair.
- Field-ready spare reduces technician downtime during on-site ELO backpack maintenance.
$25.00 $24.99 Save $0.01The item has been added -
ELO Touch
SKU: E141067
ELO Touch Replacement Cable KIT FOR IDS 03 Series - E141067
- Genuine OEM cable kit restores IDS 03 series display connectivity without full unit swap.
- Factory-new components ensure compatibility across all IDS 03 series display variants.
- Field-serviceable design lets technicians complete on-site repairs and cut system downtime.
$126.00 $125.99 Save $0.01The item has been added -
Epson
SKU: 030192A
Epson 030192A Power Cable 3ft with Hosiden Connector
3-foot Hosiden power cable for Epson receipt and label printers
- 3-foot Hosiden-connector power cable for Epson printers
- Direct replacement for receipt/label printer installations
- Maintains stable power delivery in stationary deployments
$32.10 $31.99 Save $0.11The item has been added -
Epson
SKU: C834031
Epson C834031 DC Power Cable Set
DC power cable set for Epson Wi-Fi receipt and label printers
- DC power cable set for Wi-Fi receipt/label printers
- Stable power delivery for retail and POS deployments
- Direct-fit cable for Wi-Fi enabled inkjet printers
$28.90 $27.99 Save $0.91The item has been added -
Add to Cart The item has been addedEpson
SKU: CEPS-008
Epson CEPS-008 Right Angle UL Power Cord 6'
6-foot right angle power cord for Epson thermal printers
- 6-foot right-angle UL-certified power cord
- For Epson thermal transfer and direct thermal printers
- Reliable power connection for label/receipt systems
$10.70 $9.99 Save $0.71The item has been added -
Epson
SKU: CEPS-CAT5BLK
Epson CEPS-CAT5BLK 7' Cat5 Patch Cable with Boot
7-foot Cat5 patch cable with protective boot for wired networks
- 7-foot Cat5 patch cable with protective boot connector
- Wired network connectivity for standard Ethernet
- Reliable strain relief at connector junctions
$7.50 $6.99 Save $0.51The item has been added -
Epson
SKU: CEPS-CAT5YEL
Epson CEPS-CAT5YEL 3' CAT5E Yellow Patch Cable with Boot
3' CAT5E patch cable with boot for RJ45 network connections
- 3-foot CAT5E yellow patch cable with boot connectors
- Visual identification in mixed cable runs
- RJ45 terminations at 0.05 lb form factor
$6.40 $5.99 Save $0.41The item has been added -
Geovision
SKU: 320-10210-001
Geovision 320-10210-001 Internal Power Y Cable
- Y-split design powers two devices from one source, reducing internal wiring complexity.
- Built for Geovision DVR and NVR systems, ensuring verified connector compatibility.
- Secure connector retention prevents accidental disconnection during operation.
$12.99The item has been added -
Geovision
SKU: 400-GVCOM-400
Geovision 400-Gvcom-400 Cable
- Designed for seamless integration with Geovision surveillance systems and control units.
- Supports reliable data and power transmission across standard security network configurations.
- Professional-grade construction suits demanding physical security installation environments.
$52.50 $51.99 Save $0.51The item has been added -
Geovision
SKU: 46-DE20820-0D01
Geovision 46-DE20820-0D01 DVI Video Audio Cable
- Single cable carries both DVI video and audio, reducing runs in DVR deployments.
- DVI connectivity ensures direct, standard display integration with Geovision DVR systems.
- Designed specifically for Geovision DVR platforms, confirming hardware compatibility.
$20.99The item has been added -
Geovision
SKU: 51-MT90300-0001
Geovision 51-MT90300-0001 903-VD V3 Cable
- OEM-matched cable ensures signal integrity with Geovision 903-VD V3 cameras.
- Supports both video transmission and power delivery in a single cable run.
- Purpose-built accessory eliminates compatibility guesswork during installation.
$55.00 $54.99 Save $0.01The item has been added -
Geovision
SKU: 55-VSM00-000
Geovision 55-VSM00-000 VSM Cable
- CM-rated cable meets recognized safety and performance standards for in-wall routing.
- OEM Geovision part ensures confirmed compatibility with VSM expansion modules.
- Supports both data and power transmission, simplifying VSM module interconnection.
$300.00 $299.99 Save $0.01The item has been added -
Geovision
SKU: 750-R500F20-000
Geovision 750-R500F20-000 Ua-R500F2 Ipcam Cable
- Purpose-built cable ensures signal and power compatibility with UA-R500F2 cameras.
- Drop-in replacement simplifies serviceability in existing Geovision IPCAM deployments.
- Standard industry connectors reduce installation time for new and retrofit projects.
$119.00 $118.99 Save $0.01The item has been added -
Geovision
SKU: 750-R580F20-000
Geovision 750-R580F20-000 Ua-R580F2 Ipcam Cable
- Combines power and data in one run, reducing conduit fill in multi-camera installs.
- Engineered specifically for UA-R580F2 cameras, ensuring reliable H.265 signal integrity.
- Supports cable runs up to 100 m from NVR or PoE switch for full 5MP data delivery.
$179.99The item has been added -
Geovision
SKU: 84-CB550F3-UA00
Geovision 84-CB550F3-UA00 IP Camera Cable
- Single 4-ft run delivers both Ethernet data and PoE power to compatible Geovision cameras.
- Eliminates separate power drops, reducing conduit fill and simplifying retrofit installations.
- PoE-compatible design cuts troubleshooting complexity by consolidating two runs into one cable.
$98.99The item has been added
Connectivity & Media
Connectivity and media components support reliable communication between cameras, access control devices, intercom systems, and network infrastructure. Proper cabling and connection hardware ensure stable performance, reduced signal loss, and long-term system reliability.
Plan Your Deployment
- Cable type selection (Ethernet, fiber, coaxial as applicable)
- Distance requirements and signal integrity planning
- Environmental considerations (indoor, plenum, outdoor-rated)
- Connector compatibility and termination standards
- Future expansion and structured cabling design
Connectivity & Media — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 2 working models of connectivity & media sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Type | Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.