Vivotek · SDSDQAS4-128G

Vivotek SDSDQAS4-128G 128GB Industrial MicroSD Card

128GB microSD for 24/7 surveillance in harsh environments

• 128GB capacity extends continuous recording cycles, reducing field swap frequency.
• Industrial-grade flash endures sustained 24/7 write loads without performance loss.
• Temperature-resistant build suits outdoor enclosures and embedded camera deployments.

Vivotek · SDSDQAS5-1TB

Vivotek SDSDQAS5-1TB Industrial microSD Card

1TB microSD for 24/7 IP camera recording in industrial temps

• 1TB capacity reduces media swaps in continuous surveillance setups
• Industrial-temperature rated for outdoor and variable environments
• microSD form factor fits compact camera and embedded NVR systems

Vivotek · SDSDQAS5-512G

Vivotek SDSDQAS5-512G 512GB Industrial microSD Card

512GB industrial microSD for surveillance systems with thermal stability

• 512GB capacity extends continuous recording cycles, reducing on-site media swap frequency.
• UHS-I 104 Mbps interface sustains uninterrupted video streams across NVRs, DVRs, and edge cameras.
• Industrial-grade build handles thermal fluctuation and vibration common in surveillance deployments.

Wasp · 633808091002

Wasp 633808091002 Wasp WCS3905 CCD Scanner W/8' PS2 Cable

N 8-foot PS2-terminated scanner cable assembly for Wasp WCS3905 CCD barcode scanners

• 8-foot PS2 cable suits fixed countertop or dock installs without active repeaters.
• 45 scans/sec throughput supports continuous barcode reads at receiving or POS stations.
• Contact-to-1-inch scan range locks in reliable reads on close-proximity label scanning.

Wasp · 633808091040

Wasp 633808091040 Wasp WCS3950 Series CCD Scnr W/USB Cable

USB cable assembly for the WCS3950 series CCD scanner line

• Plug-and-play USB connection requires no additional drivers or configuration.
• Purpose-built for WCS3950 series scanners, ensuring fit and signal integrity.
• Serves as a direct drop-in replacement to minimize WCS3950 deployment downtime.

Wasp · 633808121228

Wasp 633808121228 Wasp WCS3900/3905 WLR8900/8950SER PS2CBL

PS2 (keyboard) cable assembly designed for Wasp's WCS3900/3905 and WLR8900/8950 series barcode scanners

• Drop-in PS2 replacement for WCS3900/3905 and WLR8900/8950 with no reconfiguration.
• Supports 230–450 scans/sec throughput for high-volume scanning operations.
• Reads Code 39 at 4 mil resolution across a 25–300 mm working range.

Wasp · 633808121297

Wasp 633808121297 Wasp WLS9500/WPS150/Duraline Scnrclb USB

USB scanner cable designed to connect Wasp WLS9500, WPS150, and Duraline scanners to host systems

Wasp · 633808121518

Wasp 633808121518 Wasp WWS450 PS2 Cable For Base

PS2 connector cable for the Wasp WWS450 base station

• PS/2 interface enables direct keyboard or mouse integration at the WWS450 base.
• Purpose-built for WWS450 base stations, ensuring verified mechanical and signal fit.
• Supports tethered peripheral deployments, eliminating wireless dependency at the terminal.

Wasp · 633808121525

Wasp 633808121525 Wasp WWS450 USB Cable For Base - Black

USB cable assembly designed to connect a Wasp WWS450 base unit to a host system or power source

• USB interface cable for WWS450 base unit to host system
• Direct-connect data and power link on a single cable
• Replaces lost or worn cables to restore scanner uptime

Wasp · 633808121594

Wasp 633808121594 Wasp WWS450H USB Cable For Base - White

USB cable designed to connect the Wasp WWS450H base unit to power and data sources

• White USB cable delivers data and power to the WWS450H base in one connection.
• Compatible exclusively with the WWS450H base—verify model before deployment.
• Full-seat locking connector reduces intermittent signal loss at the dock interface.

Wasp · 633808181017

Wasp 633808181017 Wasp WCS3900/WLR8900 Series USB Cable

6-foot USB cable engineered as a direct replacement for Wasp WCS3900 series scanners and WLR8900 series RFID readers

• Restores full USB power (5 VDC/370 mA) and data to WCS3900/WLR8900 units.
• 6-foot length accommodates fixed-station and mobile tethered scanning deployments.
• Single-cable connection supports 230–450 scans/sec without additional power adapters.

Wasp · 633808404222

Wasp 633808404222 Wasp WPL304 Line Cord

Power line cord designed to supply AC mains power to Wasp thermal label printers in warehouse and logistics environments

• Replacement AC line cord restores power to Wasp thermal label printers quickly.
• Designed for dry warehouse environments, supporting stable print operations.
• Standard Wasp printer connector ensures drop-in fit without wiring modification.

Wasp · 633808505059

Wasp 633808505059 Replacement USB Comm Cable For WPA1200

USB communication cable engineered as a direct replacement for the WPA1200 mobile barcode printer

• Restores USB data connectivity on a failed WPA1200 with no driver installation.
• Plug-and-play connection recognized natively by Windows and macOS hosts.
• Wired specifically for WPA1200 pinouts — incompatible substitutes are avoided.

Wasp · 633808505257

Wasp 633808505257 Wasp USB Cable For 3950 8950 & 4500

USB cable replacement for the Wasp 3950, 8950, and 4500 barcode scanner lines

• Direct OEM replacement restores connectivity for Wasp 3950, 8950, and 4500 scanners.
• USB interface delivers both data transfer and power through a single cable connection.
• Stocking this cable minimizes scanner downtime in high-volume deployment environments.

Wasp · 633808510114

Wasp 633808510114 Wasp RS232 Cable For WDT2200 W/Pwr Port

N RS232 serial cable purpose-built for the WDT2200 mobile computer

• Purpose-built RS232 cable ensures reliable serial communication with the WDT2200.
• Integrated power port delivers data and charging over a single tethered connection.
• Hardwires WDT2200 to docking stations or host systems without additional power cables.

Wasp · 633808920098

Wasp 633808920098 Wasp WWS800/WWS850 USB Cable

USB cable designed for the Wasp WWS800 and WWS850 handheld barcode scanners

• Replacement USB cable restores data transfer and charging for WWS800/WWS850 scanners.
• Proprietary connector fits WWS800 and WWS850 only — verify model before deployment.
• Keeping a spare on hand reduces scanner downtime during multi-shift warehouse operations.

Wasp · 633808920104

Wasp 633808920104 Wasp WWS800 Base RS232 Cable

Serial RS-232 cable designed to connect the WWS800 base station to host systems or peripherals requiring legacy serial communication

• RS-232 serial connection integrates WWS800 base with legacy WMS, printers, and terminals.
• Point-to-point wiring requires no drivers or configuration beyond standard cable termination.
• Supports device configuration and firmware updates on systems lacking USB or Ethernet ports.

Wasp · 633808920241

Wasp 633808920241 Wasp WWS800 Base Ps/2 Cable

PS/2 connectivity cable for the Wasp WWS800 barcode scanner base station

• PS/2 interface connects WWS800 scanner base directly to keyboard ports on legacy POS or industrial hosts.
• Eliminates need for USB adapters on PS/2-equipped terminals, reducing integration complexity.
• Dedicated base cable maintains stable data path for real-time barcode capture at fixed scan stations.

Wasp · 633808920661

Wasp 633808920661 Wasp DT10 USB Cbl Communication/Charging

USB cable designed for communication and charging of Wasp DT10 mobile data terminals

• Handles data sync and charging simultaneously over a single USB connection.
• Designed exclusively for Wasp DT10 mobile terminals, ensuring proper fit and function.
• Eliminates separate charging hardware, simplifying depot and warehouse deployments.

Wasp · 633808920708

Wasp 633808920708 Replacement Cable (USB) Pocket Scanner

Replacement USB cable designed for the Wasp Pocket Scanner line

• Replacement USB cable for Wasp Pocket Scanner line
• Restores host connection after cable fatigue or damage
• Keep a spare on hand for high-cycle scanning environments

Wasp · 633808928650

Wasp 633808928650 Wasp DT60/DT90/DT92 replacement data cbl

Factory-new replacement data cable engineered for Wasp DT60, DT90, and DT92 mobile computers

• Restores data sync and charging on DT60, DT90, and DT92 mobile computers.
• Genuine OEM pinout eliminates intermittent connections common with third-party cables.
• Keyed connector seats in one orientation only, preventing misalignment during install.

Wasp · 633808928681

Wasp 633808928681 Wasp DT60/DT90/DT92 micro-USB to USB cbl

Micro-USB to USB cable engineered for field data capture with Wasp DT60, DT90, and DT92 mobile computers

• Supports both data sync and device charging over a single micro-USB connection.
• Compatible with Wasp DT60, DT90, and DT92 mobile computers — no configuration required.
• Connects directly to dock stations, wall chargers, or USB-A desktop ports for shift rotations.

Wasp · 633808929824

Wasp 633808929824 WLS8600 Replacement USB Scanner Cable

Replacement USB cable engineered for the WLS8600 barcode scanner line

• Restores WLS8600 scanner connectivity via USB 2.0/3.0 without a power adapter.
• Eliminates scan-workflow downtime caused by cable failure on warehouse or POS deployments.
• Single-unit replacement; verify WLS8600 series model match before installation.

Wasp · 633809002106

Wasp 633809002106 Wasp USB Cbl WLS9600/WDI4600 6FT Strt

6-foot straight USB cable designed for connecting Wasp WLS9600 and WDI4600 devices to a host computer or docking station

• 6-foot straight cable fits standard desk and mobile-cart deployments without extension runs.
• Carries power and data over USB, eliminating the need for auxiliary power supplies.
• Straight connector reduces mechanical stress at the port, lowering strain-relief failure risk.

Wasp · 633809002830

Wasp 633809002830 Wasp WDI7500 Indus 2D Bc Scnr W/USB Cbl

N industrial-grade 2D barcode scanner engineered for high-volume warehouse, logistics, and inventory operations where durability and read reliability

• IP65-rated housing resists dust and water jets on active warehouse floors.
• Survives 6.6 ft concrete drops, reducing scanner replacement costs mid-shift.
• Omnidirectional 1D/2D reading via USB 2.0 HID fits handheld or fixed-mount deployment.

Wasp · 633809005534

Wasp 633809005534 RS232 Cbl WWS750 scanner 9P female 6ft

6-foot RS232 serial cable terminated with a 9-pin female connector

• 6-foot RS232 cable delivers a fixed, reliable serial link for stationary WWS750 stations.
• 9-pin female connector mates directly with the WWS750 serial port—no adapter required.
• Hardwired serial connection eliminates wireless dependency in POS or data-collection deployments.

Wasp · 633809009570

Wasp 633809009570 WWS650/WDI4700 USB cable

USB cable for connecting Wasp WWS650 and WDI4700 thermal label printers to host computers and control systems

• USB cable connects WWS650 and WDI4700 printers directly to host systems.
• Carries both data and power signals over a single USB connection.
• Stock as a spare to minimize downtime in multi-station label printing deployments.

Wasp · 633809011610

Wasp 633809011610 Wasp DR6 Cradle US Power Cord

Replacement US power cord designed for the Wasp DR6 mobile device cradle

• Direct replacement power cord restores DR6 cradle operation without tools or config.
• Designed for US electrical standards, suitable for North American warehouse deployments.
• Stocking this part reduces cradle downtime caused by damaged or missing power cords.

Zebra · 105950-015

Zebra 105950-015 Euro Power Cord 220V IEC320 C13

220V Euro power cord with IEC C13 connector for Zebra printers

• IEC 60320 C13 connector fits virtually all enterprise thermal printers
• 220V AC voltage matches European wall outlets across EU regions
• Wired connection eliminates adapters for direct power delivery

Zebra · 105950-061

Zebra 105950-061 US Power Cord 120V C5

5-pack US power cords for Zebra thermal printers, 120V C5

• NEMA 5-15 to IEC 60320 C5 connector for direct Zebra printer integration
• 120V AC rated for standard North American wall outlets
• Bundle of 5 cords per SKU for multi-printer deployments

Zebra · 300257-001

Zebra 300257-001 Power Cord 120V US-IEC320C7

120V US power cord for Zebra printers and peripherals

• US-IEC320C7 connector matches Zebra printer systems
• 120V AC wired connection for North American installations
• Compatible with Zebra enterprise printing and imaging equipment

Zebra · CBA-R71-C09ZAR

Zebra CBA-R71-C09ZAR 9ft RS232 Serial Power Cable

9ft coiled RS232 cable with integrated power for mobile computers

• DB-9 female connector links Zebra devices with single serial + power line
• 9-foot length reduces adapter needs at warehouse, retail, or field workstations
• Coiled design compacts for transport, extends full length when deployed

Zebra · CBA-R73-C09ZAR

Zebra CBA-R73-C09ZAR 9ft Serial Power Cable

9ft DB-9 serial cable with combined data and power for Zebra devices

• DB-9 serial connector supports RS232 and TTL protocols for legacy systems
• 9-foot length spans standard warehouse and retail docking setups
• Single cable carries both serial communication and power simultaneously

Zebra · CBA-RF2-C09ZAR

Zebra CBA-RF2-C09ZAR 9ft RS232 Serial Power Cable

9ft coiled RS232 cable with integrated serial data and power

• DB9F connector handles both data transmission and power in one cable
• Coiled design retracts for compact storage, extends to full 9-foot reach
• Works across legacy and modern Zebra scanner systems with standard RS232

Zebra · CBA-RF3-C09ZAR

Zebra CBA-RF3-C09ZAR 9ft RS232 Serial Power Cable

9ft coiled RS232 cable with integrated power for fixed barcode scanners

• 9-pin DB-9 connector combines serial data and power in one cable run
• Coiled design stretches to 9 feet, retracts to save counter space
• Operates in cold storage and freezer zones down to -30°C

Zebra · CBA-RF7-C09ZAR

Zebra CBA-RF7-C09ZAR RS232 Serial Power Cable

9-foot RS232 serial + power cable for Zebra POS and warehouse scanners

• DB-9 Female connector integrates serial communication and DC power in one cable
• 9-foot length reaches typical workstations and conveyor-mounted barcode readers
• Operates down to -30°C for cold storage, loading docks, and outdoor deployments