Sub categories

Showing Results for Accessories

Compare

Out of stock
Paige Electric

SKU: 222600307

Paige Electric 222600307 24AWG 2-Pair RS485 Cable Assembly

24AWG 2-pair RS485 cable with CMP plenum jacket for access control
- 24 AWG 2-pair RS-485 cable assembly, plenum-rated
- Code-compliant plenum jacket for air-handling space runs
- Pre-terminated assembly saves install time at the rack
$542.99

Add to Cart
The item has been added
Free shipping over $499

$542.99

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 222800307

Paige Electric 222800307 22/1PR Str Locap Oas + 18/2C Cmp Cable

Dual-circuit shielded security cable, CMP plenum-rated for access control
- Composite security cable with 22/1PR + 18/2C in one CMP jacket
- Combines data + power runs on one pull — saves install time
- Plenum-rated for code-compliant air-handling space installation
$744.99 $604.99 Save $140.00

Add to Cart
The item has been added
Free shipping over $499

$744.99 $604.99 Save $140.00

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 224090311

Paige Electric 224090311 OSDP RS485 Cable 22/2pr

OSDP RS485 cable for access control systems with 22 AWG twisted pair
- OSDP RS485 cable, 22/2pr stranded for access control
- Open Supervised Device Protocol for secure readers
- 1000 ft spool for centralized installation rooms
$448.00 $290.99 Save $157.01

Add to Cart
The item has been added
Free shipping over $499

$448.00 $290.99 Save $157.01

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 236650603

Paige Electric 236650603 Combo Wiegand/OSDP Access Control Reader

Dual-protocol 125 kHz reader bridges Wiegand and OSDP systems
- Combo Wiegand/OSDP access reader, 125 kHz frequency
- Dual-protocol reader for legacy + modern panels
- Migrate Wiegand sites to OSDP without rewiring
$544.99 $471.99 Save $73.00

Add to Cart
The item has been added
Free shipping over $499

$544.99 $471.99 Save $73.00

Add to quote Compare
Compare

Add to Cart The item has been added
Paige Electric

SKU: 236650607

Paige Electric 236650607 Wiegand Access Control Cable

Wiegand access control cable for proximity readers and panels
- Wiegand access control cable for reader-to-panel runs
- Made for door-frame and through-wall low-voltage installations
- Length and conductor count sized for typical commercial doors
$571.99 $479.99 Save $92.00

Add to Cart
The item has been added
Free shipping over $499

$571.99 $479.99 Save $92.00

Add to cart Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 236650610

Paige Electric 236650610 Combo Wiegand/OSDP Access Control Reader

Dual-protocol access reader bridges Wiegand and OSDP systems
- Hybrid Wiegand + OSDP access control reader
- Bridges legacy Wiegand and modern OSDP panels
- Single reader supports phased system upgrades
$544.99 $471.99 Save $73.00

Add to Cart
The item has been added
Free shipping over $499

$544.99 $471.99 Save $73.00

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 236650703

Paige Electric 236650703 Combo Wiegand/OSDP Access Control Cable

Dual-protocol access cable combines Wiegand and OSDP in one run
- Combo Wiegand + OSDP access control cable
- Single cable supports both protocols in one run
- Integrates dual-protocol reader installations
$1,145.99 $957.99 Save $188.00

Add to Cart
The item has been added
Free shipping over $499

$1,145.99 $957.99 Save $188.00

Add to quote Compare
Compare

Add to Cart The item has been added
Paige Electric

SKU: 236650707

Paige Electric 236650707 Combo Wiegand Access Control Cable

Wiegand combo cable with integrated power, data, and ground in one jacket
- Combo Wiegand access control cable for multi-conductor reader runs
- Supports data + power + alarm in a single bundled jacket
- Reduces install cost vs running multiple separate cables
$1,145.99 $957.99 Save $188.00

Add to Cart
The item has been added
Free shipping over $499

$1,145.99 $957.99 Save $188.00

Add to cart Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 236650803

Paige Electric 236650803 Combo Wiegand/OSDP Access Control Cable

Dual Wiegand/OSDP cable for hybrid access control systems
- Combo Wiegand/OSDP cable for unified installations
- Eliminates dual-cable runs in panel-to-reader work
- Supports phased migrations to OSDP
$2,176.49 $1,791.99 Save $384.50

Add to Cart
The item has been added
Free shipping over $499

$2,176.49 $1,791.99 Save $384.50

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 236650807

Paige Electric 236650807 Hybrid Wiegand/OSDP Access Control

Hybrid Wiegand/OSDP reader bridges legacy and modern access control
- Hybrid Wiegand + OSDP access control reader
- Dual-protocol architecture for transition deployments
- Single reader supports legacy and modern panels
$2,176.49 $1,915.99 Save $260.50

Add to Cart
The item has been added
Free shipping over $499

$2,176.49 $1,915.99 Save $260.50

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 236650810

Paige Electric 236650810 Combo Wiegand/OSDP Access Control Cable

Dual-protocol access cable supporting Wiegand and OSDP readers
- Combo Wiegand + OSDP cable for unified protocol use
- Eliminates separate cable runs per protocol
- Bulk cable for multi-reader access control installs
$2,061.99 $1,722.99 Save $339.00

Add to Cart
The item has been added
Free shipping over $499

$2,061.99 $1,722.99 Save $339.00

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 236880804

Paige Electric 236880804 Wiegand/OSDP Composite Access Cable CMR

Dual-protocol composite cable for Wiegand and OSDP access control
- Wiegand/OSDP composite cable, CMR fire-rated
- Single conduit run for both signaling protocols
- Riser-rated for between-floor cable pulls
$1,838.49 $1,674.99 Save $163.50

Add to Cart
The item has been added
Free shipping over $499

$1,838.49 $1,674.99 Save $163.50

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 248250811

Paige Electric 248250811 24/25pr SOL CAT 3 CMR Gray Reel 50

24-pair CAT 3 solid conductor cable, 50-foot reel, CMR rated
- 24/25pr CAT 3 CMR cable, 50 ft reel, gray
- Solid conductor for fixed structured cabling
- Riser-rated for between-floor data installations
$2,080.00 $1,347.99 Save $732.01

Add to Cart
The item has been added
Free shipping over $499

$2,080.00 $1,347.99 Save $732.01

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 250270804

Paige Electric 250270804 24/4pr Sol CAT5E Cmp Fep/fep UV

CMP CAT5E solid copper cable with UV-rated dual FEP jacket
- 24/4pr solid CAT5E CMP plenum cable, UV-rated
- FEP/FEP dual-jacket construction for plenum spaces
- Outdoor UV resistance for exterior cable runs
$688.99

Add to Cart
The item has been added
Free shipping over $499

$688.99

Add to quote Compare
Compare

Out of stock
Paige Electric

SKU: 258300301

Paige Electric 258300301 Cat 6 CMP Cable 22/4PR

Cat 6 CMP plenum cable, 22 AWG, 250 MHz—code-compliant above ceilings
- Cat 6 CMP plenum cable, 22/4PR construction
- NEC Article 800 plenum-rated for HVAC return paths
- Eliminates conduit requirement above drop ceilings
$1,031.99 $862.99 Save $169.00

Add to Cart
The item has been added
Free shipping over $499

$1,031.99 $862.99 Save $169.00

Add to quote Compare
Compare

Add to Cart The item has been added
Paige Electric

SKU: 258300303

Paige Electric 258300303 22/4PR CMP PUR Cable 1000ft

1000ft 22/4 twisted-pair plenum cable for security & access control
- 22/4PR CMP plenum cable, 1000 ft spool
- Adequate signal integrity for runs under 1000 ft
- Plenum-rated for above-ceiling air-handling spaces
$1,031.99 $862.99 Save $169.00

Add to Cart
The item has been added
Free shipping over $499

$1,031.99 $862.99 Save $169.00

Add to cart Add to quote Compare

Accessories

Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Deployment Guide PoE Planning

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Sub categories

Showing Results for Accessories

Accessories

Deployment Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading