i-PRO

SKU: IPS-BWC-MNT-POUCH

i-PRO IPS-BWC-MNT-POUCH Body Camera Mount Kit Pouch

• IP67-rated pouch withstands submersion to 1 m for 30 min, per IEC 60529.
• MIL-STD-810H compliance ensures reliable retention through patrol and tactical handling.
• Klick Fast™ interface integrates with ICV4000 for unbroken chain-of-custody workflows.

i-PRO

SKU: IPS-ICV-INCAR-MIC

i-PRO IPS-ICV-INCAR-MIC In-Car Mic RCA Connector

• RCA male connector enables analog audio-in integration with compatible i-PRO in-vehicle recorders.
• Operates reliably across -10°C to +50°C, supporting year-round fleet deployment in varied climates.
• Pairs with systems running H.265/H.264 compression for efficient audio-video documentation in-cabin.

i-PRO

SKU: IPS-LPR-ETH-SNSR

i-PRO IPS-LPR-ETH-SNSR ICV 25 Network Cable

• Purpose-built for i-PRO ICV 25 LPR systems, ensuring verified sensor and video compatibility.
• Supports 1080p (2 MP) video transmission for high-detail license plate capture over Ethernet.
• ONVIF-compliant design integrates with third-party NVRs and VMS platforms without custom config.

i-PRO

SKU: TLC-900D-P

I-pro Leather Pouche FOR Arbitrator Microphone - TLC-900D-P

• OEM leather pouch sized specifically for the i-PRO Arbitrator wireless microphone.
• Soft interior lining protects microphone finish and connectors during daily shift use.
• Integrated belt-clip provision supports standard duty-belt carry for field officers.

i-PRO

SKU: ACPA12100-3389

i-PRO Lind Ac/dc Adapter Including Power Cord & - ACPA12100-3389

• Includes integrated power cord, eliminating sourcing delays during mobile deployments.
• Regulated AC/DC output protects camera and recording electronics from voltage spikes.
• Compact form factor supports concealed installation in vehicles and confined spaces.

i-PRO

SKU: M-JB

i-PRO M-JB Round Junction Box for Fixed Dome Cameras

IP66 round junction box for ceiling-mount fixed dome cameras

• IP66 weather-sealed housing protects RJ45 connectors and splices from rain and dust
• Supports CAT5e and CAT6 cable with weatherproof glands to prevent water ingress
• UV-stabilized aluminum construction for outdoor and semi-exposed ceiling installations

i-PRO

SKU: M-JB-MINI

i-PRO M-JB-MINI Round Junction Box IP66 Weatherproof

IP66 round junction box for ceiling/wall camera mounts, indoor/outdoor

• IP66 weatherproof rating seals connectors and cable loops from water and dust
• Flat-top design nests under camera housing without forcing sharp CAT5e/CAT6 bends
• Multiple knockouts accept conduit from any direction without custom modifications

i-PRO

SKU: M-JB-MINI-B

i-PRO M-JB-MINI-B Round Junction Box for Bullet Cameras

Compact round junction box for i-PRO M-49-V and M-89-F-L bullets

• 104.4mm × 54.5mm footprint fits ceiling or wall with minimal visual impact
• Aluminum alloy construction weighs 0.79 lbs, needs no extra reinforcement
• Model-specific design for M-49-V and M-89-F-L eliminates adapters and fitment

i-PRO

SKU: M-JB-T

i-PRO M-JB-T Round Junction Box for Dome Cameras

Compact 126mm aluminum junction box for i-PRO dome cameras

• Low-profile 38.5mm height fits drop ceilings and tight soffits
• Lightweight 0.24kg aluminum construction installs on drywall without reinforcement
• Compatible with M-46-V, M-44-V, M-24-V-T, M-26-V dome series

i-PRO

SKU: M-PARAPET

i-PRO M-PARAPET PTZ Parapet Mount M-200-P

• Gooseneck geometry delivers 879mm horizontal clearance for unobstructed 360° PTZ pan.
• Aluminum alloy rack-style bracket weighs 4.3 kg — plan anchor loads accordingly.
• Positions PTZ dome 831mm vertically off the parapet surface for full perimeter coverage.

i-PRO

SKU: M-PENDANT

i-PRO M-PENDANT NPT 3/4 Pendant Mount 7.75 Inch

Ceiling pendant mount with 7.75" NPT 3/4 connection for i-PRO cameras

• 7.75-inch extension positions cameras below ceiling obstructions
• Aluminum alloy construction at 0.55 lbs with corrosion-resistant finish
• Internal cable routing for power and network connections

i-PRO

SKU: M-PENDANT-EX

i-PRO M-PENDANT-EX Pendant Extension Mount

Aluminum pendant extension for i-PRO PTZ cameras in high-ceiling spaces

• Internal cable routing protects power and network lines from damage
• Stackable aluminum alloy construction at 0.35 lbs with corrosion-resistant finish
• Threaded design threads onto standard i-PRO pendant mounts for secure installation

i-PRO

SKU: M-PM-B-V2

i-PRO M-PM-B-V2 Pole Mount Bracket

Die-cast aluminum pole/wall mount for i-PRO dome and bullet cameras

• IP66 weather and dust protection rated for outdoor installations
• Lightweight 0.75 lbs design with UV and corrosion-resistant black finish
• Compatible with select i-PRO dome and bullet camera models

i-PRO

SKU: M-PTZ-JB

i-PRO M-PTZ-JB PTZ Junction Box

Aluminum junction box for PTZ camera cable management, indoor/outdoor

• 12-inch aluminum alloy resists corrosion in outdoor and harsh environments
• Compact 11.7" × 9.6" × 5" footprint fits tight installation spaces
• 5.51 lbs lightweight design minimizes load on camera mounts

i-PRO

SKU: M-PTZ-PM

i-PRO M-PTZ-PM Pole Mount Adapter

Pole mount adapter for PTZ domes; die-cast aluminum, round/square posts

• Die-cast aluminum with powder coating resists corrosion and UV degradation
• Optimal lens clearance prevents IR reflection during night operation
• Even weight distribution eliminates drift on vertical pole installations

i-PRO

SKU: M-WM-JB-MINI-V2

i-PRO M-WM-JB-MINI-V2 Wall Mount with Junction Box

Wall mount with integrated junction box for i-PRO dome cameras

• Die-cast aluminum with powder-coat white finish resists corrosion outdoors
• Built-in junction box consolidates power and signal connections at mount
• Anchors to concrete, masonry, steel, and wood-frame surfaces without adapters