Sub categories

Showing Results for Accessories

Compare

Out of stock
Hanwha

SKU: EP21-001035

Hanwha Accessory,Terminal Block-plug;F735C02100
$2.24 $1.99 Save $0.25

Add to Cart
The item has been added
Free shipping over $499

$2.24 $1.99 Save $0.25

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM03-021680G

Hanwha AM03-021680G Assembly Cover Top

OEM assembly cover top housing for Hanwha QNV-6012R cameras
- Assembly cover top for the Hanwha QNV-6012R dome
- OEM replacement maintains camera equipment integrity
- Direct-fit spare for vandal-resistant indoor cameras
$53.71 $52.99 Save $0.72

Add to Cart
The item has been added
Free shipping over $499

$53.71 $52.99 Save $0.72

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM06-007772B

Hanwha AM06-007772B XNP-6320 Interface PCB Assembly

OEM interface PCB for XNP-6320 PTZ with H.265 video and alarm I/O
- H.265, H.264, and MJPEG video compression with G.711/G.726/AAC-LC audio
- 4 alarm inputs and 2 outputs for external sensor and device integration
- 10/100BASE-T ethernet and RS-485 multi-protocol serial control support
$118.31 $117.99 Save $0.32

Add to Cart
The item has been added
Free shipping over $499

$118.31 $117.99 Save $0.32

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM06-008187A

Hanwha AM06-008187A PCB Assembly Interface

OEM PCB interface for Hanwha XNP-6550RH surveillance systems
- Signal routing and power distribution for XNP-6550RH network cameras
- White PCB assembly form factor, engineered to Hanwha OEM specifications
- Replacement part for professional surveillance system maintenance and repair
$116.80 $115.99 Save $0.81

Add to Cart
The item has been added
Free shipping over $499

$116.80 $115.99 Save $0.81

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM06-009483A

Hanwha AM06-009483A PCB Interface Assembly

OEM PCB interface assembly for Hanwha PNM-9322VQP systems
- Direct replacement component engineered for PNM-9322VQP surveillance platform
- PoE (802.3af) powered interface with white PCB housing for standard deployment
- Genuine manufacturer part for authorized service and field maintenance integration
$42.40 $41.99 Save $0.41

Add to Cart
The item has been added
Free shipping over $499

$42.40 $41.99 Save $0.41

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-002530M

Hanwha AM07-002530M Case Top Assembly

OEM case top assembly for SNV-6084R enclosure replacement
- Direct-fit replacement for SNV-6084R surveillance housing
- Ivory finish maintains aesthetic consistency with Hanwha enclosures
- Genuine OEM part for field technicians and system integrators
$102.96 $101.99 Save $0.97

Add to Cart
The item has been added
Free shipping over $499

$102.96 $101.99 Save $0.97

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-004492M

Hanwha AM07-004492M Case Top Assembly

Genuine OEM case top assembly for QNV-6072R NVR systems
- OEM case top assembly for the Hanwha QNV-6072R NVR
- Direct-fit replacement maintains structural integrity
- Supports warranty compliance on field repairs
$83.99

Add to Cart
The item has been added
Free shipping over $499

$83.99

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-004492P

Hanwha AM07-004492P Case Top Assembly

Genuine OEM case top assembly for QNV-6082R camera housing
- Precision-molded composite construction for exact fit and secure mounting
- Environmental protection against dust, moisture, and physical damage
- Authentic Hanwha component maintains system compatibility and warranty status
$56.06 $55.99 Save $0.07

Add to Cart
The item has been added
Free shipping over $499

$56.06 $55.99 Save $0.07

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-004492S

Hanwha AM07-004492S Case Top Assembly

OEM case top assembly for QNV-8081R with IP67 environmental sealing
- Precision-manufactured housing restores moisture, dust, and temperature resistance
- Direct replacement for QNV-8081R WiseNet HC maintains structural integrity
- IK10 impact rating and outdoor-rated design for demanding field deployments
$77.55 $76.99 Save $0.56

Add to Cart
The item has been added
Free shipping over $499

$77.55 $76.99 Save $0.56

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-004492X

Hanwha AM07-004492X Case Top Assembly

OEM case top assembly for QNV-8081R housing replacement
- Genuine Hanwha component designed for QNV-8081R camera enclosure
- White case top assembly maintains proper environmental sealing
- Direct replacement part for maintenance and system reconfiguration
$61.05 $60.99 Save $0.06

Add to Cart
The item has been added
Free shipping over $499

$61.05 $60.99 Save $0.06

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-004782A

Hanwha AM07-004782A SNP-Series PTZ Dome Cover

Transparent dome cover for SNP-Series PTZ cameras with outdoor weather protection
- UV-resistant polymer construction shields optics and mechanisms from rain, snow, and dust
- Full pan-tilt-zoom range preserved with transparent dome design for unobstructed video
- Drop-in accessory fits SNP-Series PTZ cameras without installation complexity
$118.51 $117.99 Save $0.52

Add to Cart
The item has been added
Free shipping over $499

$118.51 $117.99 Save $0.52

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-006494A

Hanwha AM07-006494A Front Assembly Housing

Genuine OEM front housing for Hanwha Vision security systems
- Authentic Hanwha replacement component manufactured to OEM tolerances
- Compatible across Hanwha Vision surveillance system architectures
- White housing assembly for professional integrator installations
$48.87 $47.99 Save $0.88

Add to Cart
The item has been added
Free shipping over $499

$48.87 $47.99 Save $0.88

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-006494O

Hanwha AM07-006494O Front Assembly Component

OEM front assembly for Hanwha QNO7080R surveillance systems
- Genuine Hanwha component engineered as direct replacement for QNO7080R
- White front assembly housing, 2 lb, manufactured to original specifications
- Ideal for system maintenance, spare parts inventory, and field service deployments
$226.99

Add to Cart
The item has been added
Free shipping over $499

$226.99

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-006576A

Hanwha AM07-006576A SNO-L6013R Front Assembly

SNO-L6013R front assembly with 3.6mm lens and 65ft IR for outdoor duty
- Front assembly OEM part for the Hanwha SNO-L6013R
- Supports 2MP 1080p at 30 fps + IP66 weatherproof
- 65 ft IR LED range + 0.15 lux color performance
$35.99

Add to Cart
The item has been added
Free shipping over $499

$35.99

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-006607F

Hanwha AM07-006607F Case Top Assembly for QND-6070R

OEM case top assembly for QND-6070R thermal eyeball cameras
- Precision polymer enclosure with thermal management for QND-6070R
- Environmental sealing protects optics and sensors from dust and moisture
- Integrator/technician installation for component-level maintenance and repair
$36.08 $35.99 Save $0.09

Add to Cart
The item has been added
Free shipping over $499

$36.08 $35.99 Save $0.09

Add to quote Compare
Compare

Out of stock
Hanwha

SKU: AM07-008595L

Hanwha AM07-008595L Case Body Assembly

OEM case body assembly for Hanwha 9082R UV bond systems
- Genuine Hanwha manufacturer component designed for 9082R UV bond compatibility
- Replacement part for surveillance system repair and maintenance applications
- White housing assembly, 1.5 lb weight for standard installation
$197.99

Add to Cart
The item has been added
Free shipping over $499

$197.99

Add to quote Compare

Accessories

Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Deployment Guide PoE Planning

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Sub categories

Showing Results for Accessories

Accessories

Deployment Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading