ACTi · EPR8ADVAPC-163

ACTi Acrylic Protective Cover FOR 163IN DV - EPR8ADVAPC-163

Wall-mountable acrylic protective frame designed specifically for 163-inch ACTi DV displays

• Shields 163-inch ACTi DV displays from dust, impact, water splash, and scratches.
• Wall-mount installation uses integrated points; no special tools or power required.
• Acrylic material preserves touch and IR remote functionality on supported displays.

ACTi · EPR8ADVAPC-189

ACTi Acrylic Protective Cover FOR 189IN DV - EPR8ADVAPC-189

Outdoor dome deployments in high-traffic or vandal-prone areas demand more than standard housings

• Purpose-built acrylic shield preserves full 189° fisheye FOV without distortion.
• UV-resistant construction prevents yellowing, maintaining optical clarity long-term.
• Direct-fit design retains camera IP rating and environmental sealing when installed.

ACTi · EPR8ADVAPC-216

ACTi Acrylic Protective Cover FOR 216IN DV - EPR8ADVAPC-216

Wall-mountable acrylic protective frame designed for ACTi 216-inch interactive displays

• Wall-mounts over ACTi 216-inch displays without modifying the display itself.
• Shields display surface from dust, impact, water splash, and scratches in high-traffic sites.
• Attaches to existing wall bracket infrastructure; includes mounting hardware in the box.

ACTi · DVINSTALL-AH

ACTi After Hours Install (5PM-8AM) ADD When - DVINSTALL-AH

Professional installation service designed for scheduled deployments where a factory-trained crew performs commissioning on-site

• After-hours scheduling (5PM–8AM) keeps active facilities operational during install.
• Factory-trained crew follows standardized commissioning procedures across all sites.
• Documented handoff at job completion supports audit trails and project closeout.

ACTi · EPR7EPR8A88400-000 A085NT-000

ACTi Balancebox 400-40 W/ Vesa - EPR7EPR8A88400-000 A085NT-000

• 40W power distribution consolidates multiple camera feeds into a single compact unit.
• Integrated VESA mount eliminates separate brackets, reducing installation complexity.
• Built-in protection cutoffs prevent service interruption if 40W capacity is exceeded.

ACTi · EPR8A88800-000

ACTi Balancebox 400-90 W/ Vesa Interface - EPR8A88800-000

Manual height-adjustable mounting solution for interactive flat panels and displays up to 90W

• Manual height adjustment repositions displays without motorized components or electrical integration.
• Stainless steel construction resists corrosion in humid or temperature-variable environments.
• Supports displays up to 90W; confirm panel weight before installation to avoid overload.

ACTi · EPR8A88900-000

ACTi Balancebox 650-130 W/ Vesa Interface - EPR8A88900-000

When you're mounting displays or equipment that need both structural support and power distribution in security operations centers or command

• VESA 650 interface supports large-format displays in SOC and command room deployments.
• Integrated 130 W power delivery eliminates external bricks and shortens cable runs.
• Balanced weight distribution reduces long-term stress on wall anchors and brackets.

ACTi · EPR8A88850-000

ACTi Balancebox 650-80 W/ Vesa Interface - EPR8A88850-000

Balancebox 650-80 monitor mount with VESA interface compatibility

• 80W power capacity supports standard LED surveillance monitors in the 22–27-inch range.
• VESA 75×75mm and 100×100mm compatibility eliminates proprietary adapters across multi-display installs.
• Standardized mount interface simplifies bracket and monitor arm integration in control room deployments.

ACTi · EPR8A65130-000

ACTi Balancebox Mobile Stand + 650-130 W/ Vesa - EPR8A65130-000

Display stand accessory designed for commercial deployments where reliability matters

• VESA-pattern attachment hardware simplifies mounting integration into standard display builds.
• 130 W power rating supports the named ACTi panel within a documented, predictable BOM.
• Manufacturer warranty travels with the unit, giving integrators a clear service escalation path.

ACTi · EPR8A65080-000

ACTi Balancebox Mobile Stand + 650-80 W/ Vesa - EPR8A65080-000

Mobile stand designed to support display monitors in surveillance control room and field deployment scenarios

• Integrated 80W power supply eliminates a separate PSU, reducing cable clutter.
• VESA-compatible mount supports standard 100x100mm patterns for broad monitor fit.
• Mobile stand form factor enables rapid redeployment between sites without rewiring.

ACTi · EPR8A88444-MS

ACTi Balancebox Mobile Stand MIX + 400-40 W/ - EPR8A88444-MS

Mobile stand purpose-built for ACTi MIX series displays and monitors, integrating 40W power delivery into a wheeled base — solving the

• Integrated 40W power delivery eliminates separate power runs when repositioning displays.
• Wheeled base with brake engagement enables safe, controlled relocation across control-room floors.
• Purpose-built for ACTi MIX-series displays; verify MIX model mounting interface before ordering.

ACTi · EPR8A88666-MS

ACTi Balancebox Mobile Stand MIX + 400-90 W/ - EPR8A88666-MS

Mobile stand designed to deliver 90W of power to surveillance equipment in temporary or semi-permanent deployments

• Delivers 90W of integrated power, eliminating separate power infrastructure on-site.
• Mobile stand form factor enables rapid deployment in staging areas and temp installs.
• Supports multiple low-power devices or a single high-draw camera within the 90W budget.

ACTi · CTS-CMNTB-RL50

ACTi Black Steel Ceiling Mount FOR RL500 - CTS-CMNTB-RL50

Black steel ceiling mount purpose-built for the RL500 camera

• Black steel construction resists vibration, maintaining camera focus in high-traffic areas.
• Purpose-built exclusively for the ACTi RL500, ensuring precise mechanical fit and load rating.
• Ceiling-recessed design conceals mounting hardware for a clean, low-profile installation.

ACTi · CTI-FOBIO-PANL-V1+TAF

ACTi BLE Clicker FOB (6 PER Package)for - CTI-FOBIO-PANL-V1+TAF

• Six BLE FOBs per pack reduce per-credential cost for multi-door deployments.
• Battery-powered design eliminates wiring runs at each credential point.
• ACTi-native BLE pairing ensures verified interop with supported panel models.

ACTi · BT-NEWMIC

ACTi Bluetooth Microphone Array FOR Q & Z Series - BT-NEWMIC

Portable Bluetooth microphone array purpose-built for conference rooms and classrooms using ACTi Q and Z Series interactive displays

• Four directional mics deliver 360° coverage, eliminating audio dead zones in any room layout.
• Bluetooth or USB Type-C dual-mode connection enables fast, cableless deployment on ACTi Q/Z displays.
• Built-in echo cancellation and noise reduction keep speech intelligible during live calls or recordings.

ACTi · PMAX-1501

ACTi Cable Gland for Outdoor Domes (except - PMAX-1501

Cable gland designed for ACTi outdoor dome cameras (non-hemispheric models)

• Seals cable entry on ACTi outdoor dome cameras against rain, dust, and temperature cycling.
• Designed for non-hemispheric outdoor dome form factors — verify fit against your camera model.
• Install before power-up to ensure the cable jacket is fully seated and water ingress is prevented.

ACTi · CTI-OTHER-ADJX-S4

ACTi Camera Shelf- Compatible With V4 Stands - CTI-OTHER-ADJX-S4

Mounting shelf accessory built to integrate with ACTi V4 stand systems

• Factory-designed interface mounts directly to ACTi V4 stands—no adapters required.
• Passive component needs no power or network connections, simplifying installation.
• V4-specific fit ensures proper camera alignment and stability in fixed deployments.

ACTi · CTI-OTHER-PENC

ACTI Capacitive Pens And Holder - 2 Pack Pen - Cti-Other-Penc

Two-pack of capacitive styluses paired with a desk-mounted holder, designed for hands-free touchscreen interaction on ACTi monitoring stations and

• Two-pack ensures a backup stylus is always available at the monitoring station.
• Capacitive tip allows touchscreen input without removing PPE or gloves on shift.
• Desk-mounted holder keeps pens organized and immediately accessible at the console.

ACTi · CDS-AM100-WF24

ACTI Cds-AM100-WF24

Ceiling mount bracket designed for flush or semi-flush installation of ACTi dome cameras into drop-tile ceilings or drywall

• Enables flush ceiling installation of ACTi dome cameras with no visible conduit.
• Designed for drop-tile or drywall ceilings in retail, office, and hospitality sites.
• Single-unit kit includes the bracket; verify dome model compatibility before ordering.

ACTi · CDS-MBLDS-EVOT-H

ACTI Cds-Mblds-Evot-H

43-inch mobile digital signage system designed for temporary or semi-permanent deployment in security command centers, lobby displays, and event

• 1920×1080 HD LCD at 1000 nits stays legible under ambient light in active ops areas.
• Mobile floor stand enables tool-free repositioning across sites with no mounting infrastructure.
• HDMI and LAN inputs plus 8 GB internal storage support ACTi NVR and VMS workflows.

ACTi · CDS-MOUNT-FIXW-NI

ACTi Cds-mount-fixw-ni

Fixed wall-mounting bracket designed to secure dome cameras to vertical surfaces in indoor and light-duty outdoor environments

• Fixed wall mount eliminates pan-tilt hardware where a set sightline is sufficient.
• Designed for ACTi dome cameras — verify model compatibility before installation.
• Mount to structural backing (studs, concrete, steel) for vibration-stable long-term aim.

ACTi · CDS-NIO43-NIDS-S15

ACTI Cds-NIO43-Nids-S15

Network security threats don't stop at the perimeter—they evolve constantly, targeting vulnerabilities in converged IP surveillance and access

• PCAP touch technology ensures reliable multi-touch input in demanding environments.
• HDMI, USB-C, USB, and Ethernet ports support flexible AV and network integration.
• Wall-mount form factor simplifies installation in control rooms or lobby deployments.

ACTi · CDS-NIO55-NIDS-S10

ACTI Cds-NIO55-Nds-S10 - Cds-NIO55-Nids-S10

Network interface module designed to extend or upgrade network connectivity in ACTi surveillance deployments

• Extends Ethernet connectivity to ACTi NIO55 series recorders and CDS platforms.
• Bridges isolated recording systems to IP infrastructure for NVR integration.
• Cold-install module seats in designated slot; verify link via management UI before service.

ACTi · CDS-NIO55-NIDS-S20

ACTI Cds-NIO55-Nids-S20

Network interface module designed to extend network connectivity and integration options for ACTi surveillance systems

• Extends Ethernet network ports on ACTi NIO-series NVR deployments via RJ-45.
• Bridges video traffic onto isolated segments, reducing bandwidth contention.
• Mounts near existing NVR or switch infrastructure to minimize cable runs.

ACTi · CDS-TMBDS-WAYP-32

ACTI Cds-Tmbds-Wayp-32

Professional surveillance accessory designed for integration with compatible ACTi security systems

• Purpose-built ACTi hardware module maintains factory specs across your deployment.
• Engineered for commercial installation environments requiring reliable system expansion.
• Verify compatibility with your ACTi cameras, NVRs, or platforms before ordering.

ACTi · CDS-VUEVP-76P-P19

ACTI Cds-Vuevp-76P-P19

Mounting accessory designed for ACTi surveillance camera deployments

• ACTi-native bracket ensures mechanical compatibility with supported ACTi camera models.
• Designed for fixed installations, supporting both indoor and outdoor deployment scenarios.
• Follow ACTi fastener specs during install to maintain full warranty coverage on the bracket.

ACTi · CDS-TMBDS-WAYP32+TAF

ACTi Clear Digital 32 Inch Pcap Touch - CDS-TMBDS-WAYP32+TAF

• 32" PCAP touchscreen supports multi-touch gestures for PTZ and VMS control.
• HDMI, USB-C, USB, and Ethernet ports simplify single-cable or networked deployments.
• PCAP technology registers input through gloves, suitable for industrial security posts.

ACTi · CDS-MBLDS-EVOH+TAF

ACTi Clear Digital EVO Roll Digital Signage - CDS-MBLDS-EVOH+TAF

• IP54-rated enclosure resists dust and water spray for entryways and wash-down zones.
• 1920×1080 Full HD at 480 nits delivers legible content in mixed ambient lighting.
• VESA/wall mount and HDMI input integrate with existing media players and VMS outputs.

ACTi · CDS-MBLDS-EVOT-H+TAF

ACTi Clear Digital EVO Roll Tall Digital - CDS-MBLDS-EVOT-H+TAF

• Designed for ACTi Clear Digital EVO series, ensuring native interface compatibility.
• Standardized mounting reduces integration time across multi-camera deployments.
• Proprietary ACTi component; verify camera model and system version before ordering.

ACTi · CDS-MBLDS-EVOT-M+TAF

ACTi Clear Digital EVO Roll Tall Digital - CDS-MBLDS-EVOT-M+TAF

• 1920×1080 resolution ensures legible content across lobby and showroom viewing distances.
• Ethernet connectivity supports reliable wired network integration in managed signage deployments.
• Included mobile floor stand enables quick repositioning without permanent wall-mount hardware.

ACTi · CDS-MUV27-INDS-V27+TAF

ACTi Clear Digital MUV PRO 27 - Mobile - CDS-MUV27-INDS-V27+TAF

Mobile surveillance deployments demand ruggedized hardware that delivers reliable recording and cellular connectivity across transit vehicles, law

• 27-inch PCAP touch display suits interactive indoor digital signage deployments.
• HDMI, USB-C, USB, and Ethernet ports simplify AV and network integration.
• Mobile kiosk form factor supports flexible, self-contained installation layouts.

ACTi · CDS-TTPDS-TABT-238+TAF

ACTi Clear Digital TAB Tall Interactive - CDS-TTPDS-TABT-238+TAF

When access control deployments require visitor management with ID verification and two-way communication at unmanned entry points, the ACTi Clear

• 23.8" PCAP touch display supports precise credential scanning at visitor kiosks.
• HDMI, USB-C, USB, and Ethernet ports enable flexible integration with access control systems.
• Tabletop form factor simplifies deployment at reception desks and unmanned entry points.

ACTi · CDS-SHODS-ZENS+TAF

ACTi Clear Digital ZEN Media Player Stick - - CDS-SHODS-ZENS+TAF

• Stick form factor delivers live and recorded video playback without a full server.
• Integrates with ONVIF-compliant VMS platforms and ACTi surveillance ecosystems.
• Deploys in control rooms or remote stations with minimal infrastructure changes.

ACTi · CDS-TMBDS-WAYP43+TAF

ACTi Clear Touch 43 Inch Pcap Touch - CDS-TMBDS-WAYP43+TAF

• 43-inch PCAP touch surface responds to finger input with no pressure required.
• USB touch output integrates with any ONVIF Profile S VMS supporting touch remapping.
• VESA-compatible mount supports wall or desk deployment on standard 43-inch brackets.

ACTi · CDS-TMBDS-WAYP43

ACTi Clear Touch 43 Inch Pcap Touch Screen - CDS-TMBDS-WAYP43

43-inch capacitive touch screen built for surveillance control rooms and video management stations where operators need a responsive, high-brightness

• 1000-nit brightness with anti-glare coating maintains readability in high-ambient-light environments.
• IP54-rated panel tolerates dust and incidental moisture for warehouse or NOC enclosure deployments.
• HDMI connectivity and wall-mount form factor integrate into existing VMS workstation infrastructure.

ACTi · CTI-7043XT-UH20

ACTi Clear Touch 43IN 7000XT Series - CTI-7043XT-UH20

43-inch Clear Touch display built for surveillance control room environments where operators need responsive touch interaction with VMS platforms and

• 43-inch Clear Touch panel delivers ample screen real estate for multi-camera layouts.
• Compatible with ACTi VMS and ONVIF platforms for flexible control room integration.
• VESA-compatible mounting supports both wall and stand deployment in any control room.