Access Control
Sub categories
Showing Results for Access Control
-
HID
SKU: 2122BGGMNM
HID Composite Iclass/prox 16K/16 Prog F-g - 2122BGGMNM
- Operates on both 125 kHz prox and 13.56 MHz iCLASS readers from a single card.
- 16K/16 memory supports multiple access applications and leaves room for future expansion.
- Composite polyester-PVC construction survives -40°F to 158°F for long migration cycles.
$18.35 $10.99 Save $7.36 -
HID
SKU: 2122BGGMNN
HID Composite Iclass/prox 16K/16 Prog F-gloss F-gloss Matching Iclass# NO Slot - 2122BGGMNN
- Dual 125 kHz + 13.56 MHz in one card supports phased migration without swapping all readers.
- 16K/16 iCLASS memory accommodates multiple applications beyond basic access control.
- No slot punch preserves structural integrity; composite build rated from -40 to 158°F.
$18.35 $11.99 Save $6.36 -
HID
SKU: 2121BGGMVM
HID Composite Iclass/prox 16K/2 Prog. Iclass/prox F-gloss B-gloss Matching ICL - 2121BGGMVM
- Operates on both 125 kHz prox and 13.56 MHz iCLASS, supporting mixed reader environments.
- 16K-bit iCLASS memory with two application areas enables segmented, multi-site access control.
- Composite PVC/polyester construction resists warping across -40°F to 158°F operating range.
$18.35 $11.99 Save $6.36 -
HID
SKU: 1586NGGNN
HID Composite Isoprox II Non-prog Gloss/gl - 1586NGGNN
- Composite polyester/PVC laminate resists cracking across -40 to 158 °F operating range.
- Non-programmed 26-bit H10301 format lets integrators assign facility codes during enrollment.
- Direct dye-sublimation print capability supports full photo ID badging on standard CR80 stock.
$8.38 $5.99 Save $2.39 -
HID
SKU: 1586LGGNV
HID Composite Isoprox II Prog - 1586LGGNV
- Field-programmable 125 kHz credential eliminates factory lead times for on-site encoding.
- Composite polyester/PVC construction delivers extended card lifetime in high-volume deployments.
- Standard 26-bit H10301 format ensures compatibility across legacy and current HID prox readers.
$8.48 $5.99 Save $2.49 -
HID
SKU: 1586LGGAN
HID Composite Isoprox II Prog F-gloss B-gloss Laser # NO Slot - 1586LGGAN
- Composite polyester/PVC laminate extends credential lifespan in high-cycle deployments.
- 125 kHz Isoprox II with 26-bit H10301 format integrates directly into existing HID reader infrastructure.
- Factory laser-engraved sequential numbering enables permanent visual tracking without separate labeling.
$8.48 $5.99 Save $2.49 -
HID
SKU: 1586LGGMN
HID Composite Isoprox II Prog Fgloss Bgloss - 1586LGGMN
- Composite polyester/PVC laminate resists cracking and delamination in high-use deployments.
- 125 kHz HID Prox compatibility integrates with existing readers and panels—no firmware updates.
- 26-bit H10301 programmable format supports custom facility codes across multi-site rollouts.
$8.48 $5.99 Save $2.49 -
HID
SKU: 1586LGGMV
HID Composite Isoprox II Prog Gloss/gloss - 1586LGGMV
- 125 kHz HID Prox compatibility integrates directly with existing legacy proximity readers.
- 26-bit H10301 format with programmable site codes eliminates reliance on pre-encoded stock.
- PVC-polyester-PVC composite construction resists delamination and cracking in daily use.
$8.48 $5.99 Save $2.49 -
HID
SKU: 1597LGGAN
HID Composite Smart Isoprox II Prog F-gloss B-gloss Laser # NO Slot Lifetime W - 1597LGGAN
- Composite polyester/PVC body resists breakage under daily high-traffic reader use.
- 125 kHz Prox + smart chip contact on one card supports legacy and future readers.
- Laser-engraved serial numbers and no slot punch preserve structural integrity long-term.
$11.29 $8.99 Save $2.30 -
HID
SKU: 1597LGGAV
HID Composite Smart Isoprox II Prog F-gloss B-gloss Laser # Vert. Slot - 1597LGGAV
- Dual 125 kHz prox + smart chip contact lets legacy and upgraded readers coexist.
- 26-bit H10301 format ensures drop-in compatibility with existing HID prox infrastructure.
- Vertical slot punch and CR80 body allow immediate deployment in current badge holders.
$11.29 $8.99 Save $2.30 -
HID
SKU: 1324GBN22
HID COV CD TXP W/o SLT Pcii Size 20 MIL - 1324GBN22
- 20 mil composite build resists cracking and delamination in high-flex deployments.
- 125 kHz Proximity II format integrates with existing HID reader infrastructure.
- No-slot CR80 design maximizes printable surface and eliminates punch-point failures.
$1.03 $0.99 Save $0.04 -
HID
SKU: 1324GAN11
HID COV DYE SUB Ovlay - 1324GAN11
- Dye-sublimation overlay for HID FARGO card printers
- Clear protective layer shields printed credentials from wear
- Operating range -40 to 158 F for varied storage environments
$1.03 $0.99 Save $0.04 -
HID
SKU: 1324GAN22
HID COV DYE SUB Ovlay - 1324GAN22
- Dye-sub overlay extends credential lifespan, reducing replacement costs in high-traffic deployments.
- Rated for -40 to 158°F operation, supporting cards used in harsh facility environments.
- Integrates into existing HID FARGO dye-sublimation printer workflows without process changes.
$1.03 $0.99 Save $0.04 -
HID
SKU: 1324GAV11
HID COV DYE SUB Ovlay - 1324GAV11
- Dye-sublimation overlay for HID FARGO card printers
- Transparent protective layer bonds to card during printing
- Improves abrasion resistance on printed access credentials
$1.03 $0.99 Save $0.04 -
HID
SKU: 1324GAV21
HID COV DYE SUB Ovlay - 1324GAV21
- Dye-sub topcoat seals printed surfaces against UV, scratches, and reader-slot wear.
- Compatible with HID FARGO dye-sublimation card printers for seamless ribbon integration.
- Rated –40 to 158 °F ensures reliable performance across demanding deployment environments.
$1.03 $0.99 Save $0.04 -
HID
SKU: 1324GAV22
HID COV DYE SUB Ovlay - 1324GAV22
- Dye-sub overlay bonds during heat transfer for bubble-free, uniform card protection.
- Shields printed graphics and photos from UV fade and abrasion across high-use deployments.
- Rated -40 to 158°F; suitable for cards used in demanding environment access control.
$1.03 $0.99 Save $0.04
Access Control
Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.
Plan Your Deployment
- Door count and expansion requirements
- Reader type (card, keypad, biometric) and credential format
- Fail-safe vs fail-secure hardware design
- Power, cabling, and network connectivity planning
- Multi-site governance and consistent standards













