QNAP 32GB DDR4 Ecc Ram 3200 MHZ Sodimm - RAM-32GDR4ECG0-SO-3200

QNAP RAM-32GDR4ECG0-SO-3200 32GB DDR4 ECC SODIMM Memory Module

Overview

The RAM-32GDR4ECG0-SO-3200 is a 32GB DDR4 ECC SODIMM running at 3200MHz, sourced direct from QNAP to ensure compatibility with QNAP NAS platforms that require ECC memory. ECC (Error-Correcting Code) memory detects and corrects single-bit memory errors in real time — a meaningful reliability advantage in always-on NAS environments where silent data corruption is the failure mode you never see coming. This module is the right choice when expanding memory in QNAP systems that support SODIMM slots and have room for a 32GB stick.

Compatibility

This module is designed for QNAP NAS devices with SODIMM DDR4 memory slots that support 32GB per slot. Based on available evidence, compatible platforms include the QNAP NAS lineup such as the TS-855eU-RP, which accepts up to 64GB total across two SODIMM slots (2 x 32GB). Systems like the TS-1232PXU-RP use UDIMM form factor and are not compatible — confirm your NAS uses SODIMM slots before ordering. Always verify maximum memory capacity and slot count against your specific model's spec sheet; not all QNAP platforms support 32GB SODIMMs even if they accept DDR4. For NAS storage systems requiring ECC, this module satisfies that requirement where non-ECC would not be an option.

Installation Notes

Power down the NAS completely and disconnect power before installing. Insert the SODIMM at a roughly 45-degree angle into the slot, then press down firmly until both retention clips engage — the module seats with an audible click. QNAP recommends installing matched pairs where dual-slot configurations are used. Maximum supported memory on dual-slot platforms using this module is 64GB (2 x 32GB). Mixing ECC and non-ECC modules in the same system is not supported on ECC-capable platforms.