Panduit NK6PPG24Y Cat 6 NetKey Punchdown Patch Panel

The Panduit NK6PPG24Y delivers a field-configurable 24-port Cat 6 keystone patch panel in a single rack unit, designed for integrators running horizontal structured cabling in datacenters, security networks, and commercial buildings. Built around the NetKey keystone platform, this panel accepts any NetKey jack—copper, fiber, or blank—so you can configure port mix on-site rather than pre-ordering fixed-port layouts. The flat punchdown design uses standard 110-style termination for 22–26 AWG twisted-pair cable, and the all-steel chassis delivers mechanical stability under dense cable loads. TIA/EIA-568-C.2 Cat 6 and ISO 11801 Class E certified to 250 MHz, the NK6PPG24Y supports 10GBASE-T, PoE++, and the proposed 802.3bt Type 3/4 standards required by high-power cameras, access points, and building-control endpoints.

Key Features

• 24-port keystone patch panel in 1 RU form factor for high-density rack installations
• NetKey modular platform—accepts any Panduit NetKey jack (Cat 6, Cat 6A, fiber, or blank) for field-configurable port layouts
• Flat 110-style punchdown termination for 4-pair, 22–26 AWG, 100-ohm twisted-pair cable
• Cat 6 performance certified to 250 MHz per TIA/EIA-568-C.2 and ISO 11801 Class E channel requirements
• Supports IEEE 802.3af (15.4 W), 802.3at (30 W), and proposed 802.3bt Type 3 (60 W) and Type 4 (100 W) PoE applications
• Cold-rolled steel (CRS) chassis with black finish for durability and EMI performance
• 19" rack-mount design; also compatible with 23" telco racks
• UL 1863 approved, RoHS compliant, and meets ANSI/TIA-1096A (formerly FCC Part 68) and IEC 60603-7 standards

Keystone modularity solves the pre-order headache common to fixed-port panels. With the NK6PPG24Y, you stock a single SKU and snap in the exact jack mix each job requires—24× Cat 6 copper for a surveillance VMS rack, 20× copper plus 4× fiber uplinks for a building-floor IDF, or a hybrid layout for access control and intercom. Every port accepts Panduit's TG-style NetKey jacks, so you're not locked into guessing port counts months before cable pull. The 110-style punchdown blocks are color-coded for T568A/B, and the flat panel geometry leaves room for fingers and a punchdown tool without fighting neighboring cables. Load capacity is serious: the cold-rolled steel frame stays rigid under 48× Cat 6 home runs plus service loops, and the 1.72" overall height clears patch-cord bend-radius requirements when panels are stacked vertically in 42U racks.

PoE passthrough is certified for the full 802.3 family—15.4 W per port for legacy PoE cameras, 30 W for 802.3at access points, and the proposed 60 W / 100 W 802.3bt Type 3/4 budgets required by PTZ cameras with heaters, high-lumen LED illuminators, and multi-radio Wi-Fi 6E APs. The panel itself is passive (no active electronics), so it introduces zero insertion loss beyond the keystone jack's rated performance; end-to-end channel compliance to 250 MHz is maintained when you pair NK6PPG24Y with Panduit Cat 6 cable and plugs from the same NetKey ecosystem. Integrators running 10GBASE-T to the edge—NVRs with 10 GbE NICs, SAN storage, or hyperconverged nodes—get the full 55-meter 10 Gb reach over Cat 6 cable when the permanent link is installed per TIA-568-C.2 guidelines. For longer runs or future-proofing to 25GBASE-T, you'd step up to Panduit's Cat 6A keystone panels; for pure 1 Gb PoE camera networks, the NK6PPG24Y is the sweet spot between performance and cost.

The flat punchdown architecture keeps termination consistent across installers. Each port has dedicated IDC slots with wire-capture geometry that seats conductors at the correct depth when you hit them with a 110 blade—no guesswork on how hard to punch, and no risk of over-seating that can nick copper and trigger return-loss failures. Color-coded labels on the punchdown block show T568A and T568B pinouts side-by-side, so you don't need to pull out a reference card when you're terminating hundreds of drops. The keystone design also isolates each jack's strain relief from its neighbors, so a tech yanking one cable during rework doesn't disturb adjacent ports. This matters in phased deployments where half the panel is live and the other half is still being pulled—you can punch down new drops without risking an accidental tug that brings down an active security camera feed.

Rackmount flexibility covers both modern datacenter and legacy telco environments. The 19" mounting ears are standard EIA-310-D spacing for square-hole and threaded racks; Panduit includes both 19" and 23" hardware in the box, so you can install into old AT&T-style frames without ordering adapter brackets. The 1 RU height is actual—1.72" overall, which leaves clearance for patch cords when you're stacking multiple panels in a vertical run. Total depth is 1.17", shallow enough that the panel doesn't interfere with rear cable managers or PDUs in shallow 2-post racks. Weight distribution is even across the mounting plane, so there's no front-heavy sag when the panel is fully loaded with 24× home runs and 24× patch cords. For wall-mount applications in tight IDFs or equipment closets, you can mount the panel to plywood backboards using the same 19" ears; just make sure the backboard is lag-bolted to studs, because a fully loaded panel with cable dress can exceed 20 pounds.

Standards compliance covers the full stack from component to channel. TIA/EIA-568-C.2 Cat 6 certification means the panel meets or exceeds insertion loss, return loss, NEXT, FEXT, and alien crosstalk specs at all frequencies up to 250 MHz. ISO 11801 Class E certification is the international equivalent, required for projects in EMEA or APAC regions. UL 1863 listing confirms the panel meets fire and electrical-safety requirements for communications circuit accessories, so it's code-compliant for installation in plenums, risers, and equipment rooms. ANSI/TIA-1096A (formerly FCC Part 68) certification covers network interface compatibility, and IEC 60603-7 confirms the RJ45 interface meets international mechanical and electrical specs. RoHS compliance covers lead, mercury, cadmium, and other restricted substances, so the panel is legal for installations in California, the EU, and other jurisdictions with hazardous-material restrictions. This is the compliance stack you need for healthcare, finance, government, and education verticals where procurement teams actually read spec sheets before signing off.

The NK6PPG24Y is part of Panduit's NetKey copper infrastructure ecosystem, which means jacks, cable, patch cords, and panels all share performance validation and warranty coverage when deployed as a matched system. For security integrators, that translates to predictable channel performance on camera networks with dozens of PoE endpoints spread across multiple IDFs—no mystery failures where one vendor's panel doesn't play nice with another vendor's cable. Deploy NK6PPG24Y with Panduit Cat 6 UTP cable, NetKey Cat 6 jacks, and Panduit patch cords, and you've got a single-source system with end-to-end certification that covers everything from the switch port to the camera's RJ45 jack.