Altronix NETWAY1EV 85W LTPoE++ Single-Port Midspan PoE Injector
Overview
The Altronix NETWAY1EV is a single-port midspan PoE injector engineered for international deployments and high-power IP device installations. Running on 230VAC/50-60Hz input, it separates itself from the standard North American NetWay1E and targets installations in Europe and other 230V markets. With a total PoE output of 85W and support for Altronix's proprietary LTPoE++ standard at 70W, 52.7W, and 38.7W alongside IEEE 802.3at (30W) and IEEE 802.3af (15W), the NETWAY1EV covers the widest range of powered devices — from entry-level IP cameras to high-draw PTZ cameras, multi-sensor panoramics, and access control hardware with electric locking.
Key Features
- 85W PoE Output with LTPoE++ Support: At 85W total output, the NETWAY1EV powers Altronix LTPoE++ devices at 70W, 52.7W, and 38.7W — covering high-draw loads like pan-tilt-zoom cameras with integrated heaters or multi-door access controllers that would stall on a standard 802.3at switch port. Standard 802.3at (30W) and 802.3af (15W) are also supported, so it works with virtually any PoE-compliant device on the market.
- 230VAC Input for International Sites: The 0.8A draw at 230VAC makes this a purpose-built unit for non-North American facilities — manufacturing plants, airports, and logistics hubs operating on 50Hz or 60Hz European-standard power, without requiring a step-down transformer or power converter.
- 100m Reach — No Repeater Required: Delivers full PoE power and Gigabit data to devices up to 100 meters from the injector. This is the standard Cat5e/Cat6 run limit, meaning you can position the NETWAY1EV in an IDF closet and reach most perimeter camera locations without mid-run powered repeaters.
- Gigabit Throughput with Auto-Negotiation: 10/100/1000 BaseT Ethernet with half/full duplex auto-negotiation keeps the data path from becoming a bottleneck. High-resolution cameras sending 4K or multi-stream feeds won't saturate a Gigabit link under normal deployment conditions.
- Wide Operating Temperature Range: Rated -20°C to 49°C at full 85W load (and to 55°C when derated to 55W), the NETWAY1EV survives unheated equipment closets in cold climates and warm telecom cabinets in summer — a real consideration in outdoor or semi-conditioned enclosures.
- UL/cUL and CE Listed: Dual agency listings satisfy both North American and European safety compliance requirements on a single SKU, simplifying procurement for multi-region projects or integrators working across borders.
- Compact Form Factor: At 1.7" x 4.1" x 7.2" and 2.2 lbs., the NETWAY1EV fits cleanly inside standard surface-mount or DIN-rail enclosures. It won't consume a full 1U rack shelf for a single powered drop.
Integration & Compatibility
The NETWAY1EV integrates into any Altronix power and PoE ecosystem, pairing naturally with Altronix enclosures and trove systems. It works with any IEEE 802.3at or 802.3af compliant device from any manufacturer, and extends to Altronix LTPoE++ endpoints for higher-power applications. For multi-port deployments or managed PoE switching, review the broader PoE injectors and switches category to compare centralized vs. per-drop injection architectures. If you're planning cable runs and power budgets across a multi-camera site, the PoE planning guide covers switch budget allocation and midspan vs. endpoint injection tradeoffs. Pair with appropriate PoE-capable network switches as the upstream data infrastructure for larger deployments.
Frequently Asked Questions
Q: What is the difference between the NETWAY1EV and the NetWay1E?
A: The primary difference is input voltage. The NetWay1E accepts 115VAC/60Hz (North America), while the NETWAY1EV accepts 230VAC/50-60Hz — suited for European and international installations. Both share the same PoE output capabilities.
Q: Does the NETWAY1EV support standard IEEE PoE devices, or only Altronix LTPoE++ devices?
A: It supports both. The NETWAY1EV is fully compliant with IEEE 802.3at (up to 30W) and IEEE 802.3af (up to 15W), so it will power any standard PoE or PoE+ device. LTPoE++ at 70W, 52.7W, or 38.7W requires a compatible Altronix LTPoE++ endpoint.
Q: What is the maximum cable run supported by the NETWAY1EV?
A: The NETWAY1EV supports runs up to 100 meters — the standard Cat5e/Cat6 limit — for both data and PoE power delivery.
Q: What are the operating temperature limits for the NETWAY1EV?
A: At full 85W output, the unit is rated -20°C to 49°C. When operated at 55W, the upper limit extends to 55°C. Storage temperature range is -20°C to 70°C.
Q: What safety certifications does the NETWAY1EV carry?
A: The NETWAY1EV carries UL/cUL and CE agency listings, covering both North American and European safety standards.
Q: Can the NETWAY1EV be mounted inside an enclosure?
A: Yes. Its compact 1.7" x 4.1" x 7.2" footprint and 2.2 lb. weight make it suitable for installation inside surface-mount or cabinet enclosures. Consult Altronix enclosure specifications for exact fit and ventilation requirements.
The NETWAY1EV is the unit I reach for when a project spec calls for LTPoE++ power delivery on 230VAC infrastructure — particularly on European manufacturing or logistics sites where running a step-down transformer to feed a North American injector is a non-starter. That 85W output ceiling is the key number: it gives you headroom for PTZ cameras with integrated defog heaters, multi-sensor panoramics, or access control nodes with electric strike or maglock loads, all on a single Cat6 run to 100 meters.
Technical Highlights:
- LTPoE++ at 70W/52.7W/38.7W: Three discrete Altronix LTPoE++ output tiers above the 802.3at ceiling — critical when powering high-draw endpoints that 30W ports simply can't sustain in cold-weather conditions where heater current spikes.
- 230VAC / 0.8A Input: Draws under 1A at 230V, which means this unit fits cleanly on a shared circuit in a Euro-standard distribution board without tripping breaker calculations even when ganging multiples in a cabinet.
- -20°C to 49°C Operating Range at 85W: Tested at full load down to -20°C — genuinely useful for unheated outdoor cabinets in northern European climates where lesser units derate or fault in winter.
Deployment Considerations:
- If you're mixing LTPoE++ and standard 802.3at devices on the same project, the NETWAY1EV handles both on a single SKU — but LTPoE++ output is only active with Altronix-compatible endpoints; standard devices negotiate to 802.3at or 802.3af automatically.
- Watch the thermal derating: above 49°C the 85W ceiling drops to 55W max — size your enclosure ventilation accordingly if the cabinet is in a warm server room or sun-exposed telecom box.
Best fit for international security integrators commissioning high-power camera and access control drops in 230VAC facilities — particularly PTZ or multi-sensor positions where standard PoE+ budgets consistently fall short.
