Middle Atlantic SRSR-4-14 14U In-Cabinet Rotating Sliding Rail System
Overview
The Middle Atlantic SRSR-4-14 is a 14-rack-unit slide-out rotating rail system designed for in-cabinet installations where rear-panel access to mounted equipment is a recurring operational requirement. The SRSR-4-14 slides out from the enclosure and rotates up to 180°, putting patch bays, NVR rear ports, switch uplinks, and power distribution units directly in front of the technician — no more working around blind corners or pulling equipment to service it. Rated at 250 lbs (113.4 kg), it handles fully populated 14U loads including heavy NVRs with multiple installed drives. Usable depth is 17.25 in (43.8 cm) and usable height is 24.5 in (62.2 cm), accommodating standard 19-inch rackmount equipment. The flat black powder coat finish is consistent with Middle Atlantic's enclosure lineup. TAA-compliant and manufactured in the USA — a relevant detail for federal, state, and government-contract integrations. Rail type is 10-32, the standard thread for most rackmount accessories and cage nuts.
Compatibility
Designed as an in-cabinet rail system, the SRSR-4-14 installs inside Middle Atlantic's rack enclosure product families — including the Middle Atlantic ERK, BGR, and similar enclosed server racks and enclosures that provide sufficient interior depth to accommodate the 19.14 in total depth of the slide mechanism. Confirm your enclosure's usable interior depth against the 19.14 in (48.6 cm) system depth before ordering; shallow enclosures under ~22 in exterior depth typically cannot accommodate this unit. Equipment mounted to this rail must use standard 10-32 rack hardware. For integrators specifying network video recorders, patch panels, or PoE switches that need regular rear-panel access in a locked-cabinet deployment, this system eliminates the need to de-rack equipment for maintenance. Review your rack accessory bill of materials against the 250 lb weight capacity — fully populated NVR bays with surveillance drives can approach that threshold.
Installation Notes
Total unit dimensions are 19.13 in W × 27.5 in H × 19.14 in D (48.6 × 69.9 × 48.6 cm); verify enclosure interior clearance on all three axes before ordering. The system ships at 57 lbs — plan for two-person lift during cabinet installation. Mount using standard 10-32 cage nuts or tapped-rail hardware consistent with your enclosure type. Confirm the enclosure floor or side-wall anchor points can bear the combined static load of the rail system plus mounted equipment under the 250 lb rated capacity.
