Viking 12in. in. Analog Clock Wire Guard - CL-WGA12

Viking Electronics CL-WGA12 Wire Guard for 12-Inch Analog Clocks

Overview

The Viking Electronics CL-WGA12 is a protective wire guard designed to shield the CL-A12 12-inch round analog clock from physical damage in high-traffic, institutional, or vandal-prone environments. If you're deploying Viking Electronics CL Series clocks in gymnasiums, correctional facilities, warehouses, or school hallways, the CL-WGA12 is the mechanical layer between a working clock and an expensive replacement. No electronics, no configuration — it mounts over the clock face and takes the hits so the movement doesn't.

Key Features

• Purpose-Built Fit for the CL-A12: Engineered specifically for Viking's 12-inch analog clock, so fitment is exact with no field modification required. If you're protecting the larger 16-inch CL-A16, that requires the CL-WGA16 instead.
• Protective Enclosure Dimensions (23.24" x 20.19" x 5.24"): The guard extends well beyond the 12-inch clock face, providing clearance for the clock hands and movement while keeping the dial readable. The 5.24-inch depth accommodates the clock body without compressing the hands.
• Shipping Weight 5.2 lbs (2.36 kg): Heavier than a basic plastic cover — this is a wire cage built for real institutional use, not a decorative accessory.
• Passive, Zero-Maintenance Protection: No power, no configuration, no firmware. Install it once and it does its job indefinitely. Pairs with Viking CL Series clock accessories for a complete installation package.

Compatibility

The CL-WGA12 (also searched as CL WGA12) is confirmed compatible with the Viking CL-A12 12-inch analog clock. For the CL-A16 16-inch clock, use the CL-WGA16. Verify your clock model before ordering — the wire guard dimensions are specific to the 12-inch form factor and will not correctly fit the larger variant.

For clock installation planning in multi-zone facilities, pair the wire guard order with the correct clock count at time of purchase — retrofitting wire guards after installation is straightforward but easier done during initial rough-in.

Frequently Asked Questions

Q: Is the CL-WGA12 compatible with the Viking CL-A16 16-inch analog clock?

A: No. The CL-WGA12 is sized for the 12-inch CL-A12 clock. The CL-A16 requires the CL-WGA16 wire guard. The enclosure dimensions (23.24" x 20.19" x 5.24") are specific to the 12-inch form factor.

Q: Does the CL-WGA12 work with wireless Viking analog clocks?

A: The wire guard is a mechanical accessory that mounts over the clock face regardless of whether the clock is wired or wireless. Verify that your specific Viking clock model is the CL-A12 12-inch variant before ordering.

Q: What are the dimensions of the CL-WGA12 wire guard?

A: The protective enclosure measures 23.24 inches wide by 20.19 inches tall by 5.24 inches deep (59.03cm x 51.28cm x 13.31cm). Shipping weight is 5.2 lbs (2.36 kg).

Q: Can the CL-WGA12 be installed in outdoor environments?

A: The source documentation does not specify an outdoor or IP rating for the wire guard. Confirm with Viking Electronics directly before deploying in exposed outdoor locations.

James Everett

The CL-WGA12 is the part integrators forget to quote until they're standing in a gym or a correctional hallway watching someone reach for the clock. At 23.24 inches wide and 5.24 inches deep, the guard is not a token gesture — it physically separates the CL-A12 clock movement from anything that gets thrown at it or swung past it.

Technical Highlights:

• Enclosure depth (5.24"): Enough clearance to protect clock hands through their full sweep without binding — a common failure point on undersized guards from generic suppliers.
• Overall footprint (23.24" x 20.19"): Sized to the CL-A12's 12-inch face with margin, so wall anchors land in predictable positions rather than requiring custom drilling around the clock body.
• Shipping weight (5.2 lbs): Indicates a steel wire construction rather than a lightweight formed-plastic cage — relevant in high-abuse environments where plastic guards get knocked loose or cracked.

Deployment Considerations:

• Confirm the clock on-site is the CL-A12 12-inch model before shipping the CL-WGA12 — the 16-inch CL-A16 needs the CL-WGA16, and the dimensions are not interchangeable.
• The documentation does not provide an environmental or IP rating for the guard — do not spec it for exposed outdoor use without confirmation from Viking Electronics.

The CL-WGA12 is the right call for K-12 gyms, correctional common areas, and manufacturing floors where wall clocks take routine abuse — anywhere a replacement clock costs more than a wire guard.