Panduit PLT5S-C Pan-Ty® Cable Ties

Cable management in security installations, equipment racks, and datacenter environments demands ties that thread fast, hold reliably, and meet fire-code requirements. The Panduit PLT5S-C delivers 50 lb tensile strength in a 17.5-inch length, sized for bundling trunk cables, power distribution, and structured-cabling home runs. The curved tip allows single-hand pickup from flat surfaces and faster initial threading through dense bundles—installer efficiency matters when you're dressing 48-port patch panels or securing plenum runs on a ladder. UL Recognized under File E56854 and CSA Certified, these ties satisfy NEC Article 800 requirements for communications cabling and Article 725 for Class 2/3 circuits.

Key Features

• 50 lb Tensile Strength: Holds multi-conductor bundles, shielded Cat6A, and mixed cable assemblies without creep or slippage
• 17.5-Inch Length: Accommodates bundle diameters up to 4.5 inches—large enough for backbone cabling and equipment-to-rack power distribution
• Curved Tip Design: Faster threading in tight spaces; reduces fumbling when working in overhead cable trays or behind rack-mount equipment
• One-Piece Nylon 6.6 Construction: No metal barbs to corrode in outdoor enclosures or coastal deployments; eliminates two-piece failure modes
• Low Thread Force: Reduces hand fatigue on large jobs—important when securing hundreds of bundles during a datacenter buildout
• UL 62275 Type 2S/21S Compliant: Meets plenum and fire-rated cable tie requirements for air-handling spaces
• Natural Color: Blends with gray cable jackets and white conduit; maintains clean appearance in customer-facing IDF/MDF locations
• 100-Pack Packaging: Reduces reorder frequency on active job sites; carton quantity of 1,000 (10 packs) available for bulk purchasing

The one-piece molded head and pawl eliminate the failure point found in two-piece designs, where the locking pawl can shear under load or vibration. Nylon 6.6 offers a service temperature range of -40°F to 185°F (-40°C to 85°C), covering outdoor camera enclosures in northern climates and equipment rooms without supplemental cooling. Chemical resistance includes gasoline, diesel fuel, and common cleaning solvents—critical when ties are exposed to diesel generator exhaust in outdoor equipment shelters or janitorial chemicals in commercial facilities. The low thread force (the force required to pull the tie through its head during installation) reduces repetitive-strain injuries on projects requiring hundreds of tie applications. Installers working from ladders or lifts benefit from the curved tip, which allows pickup from tool pouches or flat surfaces using a single hand, keeping the other hand free for balance or holding the cable bundle.

Deploy these ties for dressing cables in equipment racks (leaving service loops accessible), securing conduit runs to strut or J-hooks in above-ceiling pathways, and bundling home-run cables at consolidation points. The 17.5-inch length suits bundles of 20-30 Cat6A cables, mixed copper/fiber runs to IP cameras, or power distribution between UPS systems and rack PDUs. In outdoor applications—camera pole mounts, gate operators, perimeter lighting—the UV-stabilized nylon prevents brittleness and cracking under continuous sun exposure. These ties are compatible with Panduit installation tools including the GTS-E and GTH-E tension tools (which apply consistent tension and flush-cut the tail in one motion), PTS and PPTS manual tools, and the PTH pneumatic tool for high-volume production environments. When used with Panduit's tension tools, the tie can be installed to the rated 50 lb without over-tensioning, which can deform cable jackets and affect electrical performance in data circuits.

UL Recognition under File E56854 confirms flammability performance in accordance with UL 62275, which replaced the legacy UL 1565 standard in 2020. The Type 2S and 21S classifications indicate suitability for securing cables in non-plenum and plenum air-handling spaces, respectively, satisfying NFPA 70 (National Electrical Code) and NFPA 90A (Standard for Installation of Air-Conditioning and Ventilating Systems) requirements that inspectors verify during project closeout. RoHS compliance ensures the ties contain no lead, mercury, cadmium, or hexavalent chromium, meeting procurement requirements for LEED-certified buildings and government installations subject to federal acquisition regulations. The natural color (undyed nylon) eliminates the risk of pigment leaching in wet locations and provides a neutral appearance that integrates with most cable jackets and conduit colors. For installers managing inventory across multiple job sites, the 1,000-piece carton quantity (10 individual 100-packs) reduces restock trips and allows allocation to multiple crews without splitting bulk packaging.