Refine by

No filters applied

Showing Results for Stands and Mounts

Compare

Out of stock
Zebra

SKU: VESA-SM25060W-0B

Zebra VESA-SM25060W-0B VESA Mounting Solution for 25–27-Inch Displays

VESA bracket for 25–27" displays in warehouse and retail workstations
- Supports 75 mm and 100 mm VESA patterns, eliminating custom fabrication on mixed-fleet deployments.
- Rated for displays up to 27 inches, ensuring stable mounting in high-traffic scanning and data-capture zones.
- Designed for Zebra CS6080-HC integration, guaranteeing mechanical fit within Zebra warehouse ecosystems.
$287.13 $221.99 Save $65.14

Add to Cart
The item has been added
Free shipping over $499

$287.13 $221.99 Save $65.14

Add to quote Compare
Compare

Add to Cart The item has been added
Zebra

SKU: XBK-ET6X-KCKSTD-01

Zebra XBK-ET6X-KCKSTD-01 ET6x Kickstand with Hand Strap

Kickstand with hand strap for Zebra ET6x mobile computers
- Kickstand positions the ET6x hands-free, keeping workers productive on the floor.
- Integrated hand strap secures the device for safe single-hand carry between tasks.
- Tool-free installation enables rapid fleet-wide deployment across existing ET6x units.
In stock · Ships same business day

$284.64 $190.99 Save $93.65

Add to Cart
The item has been added
Free shipping over $499

$284.64 $190.99 Save $93.65

Add to cart Add to quote Compare

Stands and Mounts

Stands and mounts provide secure positioning for barcode scanners, mobile computers, RFID readers, and industrial devices used in warehouse and logistics environments. These mounting solutions help create ergonomic scanning stations, improve device accessibility, and support efficient workflows across packing stations, shipping areas, and production lines.

Mounting & Ergonomic Considerations

Hands-free scanner mounting for packing stations
Device mounts for forklifts and workstations
Adjustable stands for ergonomic scanning workflows
Durable mounting solutions for industrial environments
Compatibility with scanners, mobile computers, and RFID devices

Barcode Scanners Mobile Computers RFID Systems

What to Look For When Buying

The decisions that matter most before you spec.

Ergonomic Positioning Reduces Scan-Time Variability

Properly positioned barcode scanners at wrist and eye level decrease operator repetitive-strain injury and scan-retry rates. A well-designed stand keeps the scanner within the operator's natural field of view, which is especially critical in high-volume packing stations where scanning speed and accuracy compound over thousands of daily transactions.

Vehicle Mounts Must Handle Shock and Vibration

Forklifts, pallet jacks, and material-handling vehicles create continuous vibration and sudden acceleration. Industrial mounts use elastomer dampening and reinforced brackets to keep mobile computers and scanners stable, preventing data-entry errors and device drift that can degrade inventory accuracy over a full shift.

Compatibility with Your Device Form Factor Matters

Different barcode scanners, mobile computers, and RFID readers have varying mounting profiles—some require universal clips, others need proprietary cradles. Leading brands like Zebra, Datalogic, and Unitech offer mounts specifically engineered for their device dimensions and weight distribution to ensure a secure, wobble-free connection.

Cable Management and Power Integration Streamline Setup

Stands that incorporate cable trays, strain-relief clamps, and integrated charging contacts reduce installation time and minimize the risk of accidental disconnection. When paired with charging docks and cradles, a unified mount-and-charge workflow eliminates manual cable swapping and keeps devices powered throughout the shift.

Mounting Height and Angle Adjustability Drive Operator Adoption

Flexible articulating mounts and pedestal stands with height adjustment accommodate operators of different statures and accommodate varying package heights on conveyor lines. Adjustable-angle mounts reduce neck strain and improve scan-read performance when dealing with barcodes at difficult angles or on irregular surfaces.

Material Selection Determines Lifespan in Harsh Warehouse Environments

Stands exposed to moisture, extreme temperature swings, chemical spills, or high-impact zones require stainless steel, reinforced thermoplastic, or powder-coated metal construction. Choosing the correct material grade prevents rust, corrosion, and premature structural failure—directly impacting total cost of ownership and uptime in your data-capture infrastructure.

Technology Stack

The specs and acronyms that actually affect stands and mounts performance.

VESA/Universal Mount Pattern

A standardized mounting interface (usually 75mm or 100mm hole spacing) that allows quick-release and tool-free attachment of different handheld and mobile devices. Universal VESA compatibility simplifies multi-device rollouts and reduces the need for proprietary cradles, lowering spares inventory and support complexity.

Vibration Damping / Elastomer Suspension

Built-in rubber or silicone absorbers that reduce shock transmission from vehicle movement or impact forces to the mounted device. Critical for forklift and vehicle installations where without damping, continuous vibration degrades scanner optics, damages internal components, and introduces false-read errors in real-time inventory systems.

Tilt and Pan Adjustment Range

The rotational and lateral degrees of freedom offered by articulating mounts, typically measured in angular increments (e.g., ±45° tilt, ±90° pan). Wider adjustment ranges improve operator ergonomics and allow a single mount to service multiple barcode angles and package sizes without repositioning.

Load Rating / Maximum Device Weight Capacity

The maximum weight (usually 1–5 lbs for handheld scanners, 2–8 lbs for mobile computers) a mount bracket can safely support without bending or cracking. Exceeding load rating creates instability, drift, and eventual failure; confirm your device weight against the specification before deployment.

Cable Pass-Through and Strain Relief

Internal or external channels that guide power, serial, and USB cables away from the mount pivot point and operator movement zones. Proper strain relief prevents intermittent connection loss and cable damage—especially important in high-traffic areas where cables can be accidentally snagged or bent.

IP54 / IP65 Ingress Protection Rating

A rating that indicates resistance to dust and liquid splash (IP54) or water jets (IP65). In dock areas, cold-storage zones, or outdoor loading bays where washdown or moisture exposure is routine, higher IP ratings prevent corrosion, electrical shorts, and premature mount failure.

Typical Deployment Scenarios

High-Volume Packing Station (20–50 Workstations)

Deploy fixed pedestal stands with adjustable-height columns and integrated cable management at each packing line. Each station mounts a Datalogic barcode scanner and pairs with a charging dock for daily device maintenance. Articulating secondary mounts allow QC staff to spot-check barcodes without leaving the line.

Forklift and Mobile Equipment Fleet (8–15 Vehicles)

Install vehicle-rated mounts on forklifts and pallet jacks with vibration-damping brackets holding Zebra mobile computers for real-time inventory updates during putaway and retrieval. Redundant mounting points and heavy-duty stainless-steel construction withstand daily impact and environmental exposure in outdoor storage areas.

RFID Portal Dock Installation (Single or Dual-Lane Loading)

Mount RFID reader antennas on overhead gantries and side-wall poles using rigid industrial mounts to capture pallet-level identification as items enter or exit the facility. Pair with RFID accessories like signal-boosting brackets and environmental enclosures to maintain consistent read range in high-interference dock environments.

Mobile Operator Workflow (Receiving / Cycle Count Teams)

Equip field operators with belt-mounted holsters and wearable Socket Mobile scanner cradles for hands-free scanning during cycle counts and receiving verification. Flexible holster designs maintain quick-access positioning while allowing operators full arm mobility in multi-level racking and bin-picking tasks.

Frequently Asked Questions

What is the difference between a pedestal stand and an articulating mount?

A pedestal stand is a fixed or minimally adjustable base that holds a scanner or mobile computer at a set height and angle—ideal for high-volume, single-purpose workstations where consistency matters. An articulating mount uses swing arms, ball joints, or flex-arm pivots to allow 360-degree or near-360-degree repositioning, making it better suited for multi-product lines, variable-height package handling, or shared workstations where different operators need quick angle adjustments.

How do I ensure a mount is compatible with my barcode scanner or mobile computer?

Check the device manufacturer's specifications for weight, width, and mounting profile (VESA pattern or proprietary clip design). Many mounts from Zebra, Datalogic, and Unitech include universal adapters or adjustable cradles that accommodate multiple device sizes within a weight range. Always confirm load rating and contact the manufacturer or your distributor if the device form factor is unusual.

Why do forklift-mounted scanners need vibration damping?

Forklifts generate constant micro-vibrations and sudden acceleration forces that can degrade scanner optical sensors, shift the device out of its cradle, or cause connection instability. Elastomer suspension and reinforced mounting brackets absorb shock, keep the device steady, and prevent the intermittent scan failures and data errors that accumulate during a full shift of material handling.

Can I use the same mount for different scanner models across my warehouse?

Some universal and VESA-compatible mounts can accommodate multiple device sizes within a specified weight and width range, which is cost-effective for mixed-device fleets. However, proprietary cradles from specific manufacturers (Zebra, Datalogic, etc.) are optimized for their own hardware and offer superior stability. Mixing devices on a single mount may compromise ergonomics or create wobble; consult your integrator or distributor for multi-device compatibility guidance.

What cable management features should I look for in a stand?

Look for internal cable trays, clip channels, and strain-relief glands that route power and data cables away from articulation points and operator work zones. Cable pass-through designs that coil excess length inside the mount base reduce trip hazards and prevent accidental disconnection. When integrating with cables and adapters, plan for future upgrades to USB or power-over-Ethernet as your infrastructure evolves.

How do I select the right mount for outdoor or wet-environment dock areas?

Choose mounts with IP54 or IP65 ingress-protection ratings and stainless-steel or powder-coated metal construction to resist moisture, salt spray, and temperature extremes. Wall-mount and gantry-mount options are preferable to floor-standing pedestal stands in dock areas prone to washdown or water infiltration. Confirm drainage holes and sealed cable entry points to prevent water pooling and corrosion around electrical connections.

Showing Results for Stands and Mounts

Zebra VESA-SM25060W-0B VESA Mounting Solution for 25–27-Inch Displays

Zebra XBK-ET6X-KCKSTD-01 ET6x Kickstand with Hand Strap

Stands and Mounts

Mounting & Ergonomic Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Stands and Mounts

Frequently Asked Questions

Related Categories

Engineering Reading