Lifesafety Power products
-
Save $1,411.01
Add to Cart The item has been addedLifesafety Power FPO250-2C83D8PE8M2/P16-A 250W Single Voltage
250W single voltage power supply rated for 120 VAC input
- 250W capacity supports 16 relay lock outputs for multi-zone magnetic lock distribution.
- 24 auxiliary outputs deliver independent power paths for sensors and monitoring loads.
- 120 VAC input integrates with FPO-series backup modules to maintain lock hold-up on mains loss.
Usually Ships in 2-3 Weeks Free shipping over $499$4,113.00 $2,701.99 Save $1,411.01 -
Save $1,411.01
Add to Cart The item has been addedLifesafety Power FPO250-2C83D8PE8M2/P16-B 250W Single Voltage
250W single voltage power supply designed to feed access control and door lock hardware in medium-scale distributed installations
- 250W centralized supply eliminates per-door individual units, reducing conduit runs.
- 16 relay lock outputs drive strikes, maglocks, and solenoid bolts without added relays.
- 24 auxiliary outputs power readers, RTE buttons, and sensors from a single 120V AC source.
Usually Ships in 2-3 Weeks Free shipping over $499$4,113.00 $2,701.99 Save $1,411.01 -
Save $1,374.01
Add to Cart The item has been addedLifesafety Power FPO250-2C83D8PE8M1/T16-A 250W power supply 20A
250W power supply designed for access control, lock management, and distributed auxiliary loads in small-to-medium commercial security deployments
- Delivers 20A at 12VDC or 10A at 24VDC to power locks, readers, and controllers.
- Eight relay outputs, each fused at 3A, isolate faults per channel without system-wide impact.
- Per-output failsafe or failsecure mode lets mixed lock types coexist on one supply.
Usually Ships in 2-3 Weeks Free shipping over $499$4,005.00 $2,630.99 Save $1,374.01 -
Save $475.01
Add to Cart The item has been addedLifesafety Power FPO250-2C82D8E4M1 Power supply board 250W 20A/1
250W power supply board engineered for centralized distribution to multiple IP cameras , access control hardware, and network endpoints in security
- Dual-output design supplies 20A@12VDC or 10A@24VDC from a single 250W board.
- Consolidates power for multiple cameras and access control devices in one cabinet.
- Board-level form factor integrates into rackmount enclosures for centralized distribution.
Usually Ships in 2-3 Weeks Free shipping over $499$1,386.00 $910.99 Save $475.01 -
Save $367.01
Add to Cart The item has been addedLifesafety Power FPO250-2C82D8E4 16 Lock 16 Aux Outputs 250WPS
250W equipment cabinet power supply designed for distributed access control and security integration deployments
- Delivers 250W at 12VDC/20A or 24VDC/10A to power up to 16 mag-lock circuits.
- 16 individually 3A-fused auxiliary outputs isolate faults, preventing cascading power loss.
- E4 enclosure rating confirms direct cabinet mounting in standard access control installations.
Usually Ships in 2-3 Weeks Free shipping over $499$1,071.00 $703.99 Save $367.01 -
Save $375.01
Add to Cart The item has been addedLifesafety Power FPO250/250-E4 Expandable dual voltage system 20A
250W expandable power supply rated for 20A at 12V or 10A at 24V — designed for mid-scale IP camera and access control deployments where you need
- Delivers 250W with dual rails: 20A at 12V and 10A at 24V from one enclosure.
- Eliminates separate supplies when a site mixes 12V cameras and 24V access control devices.
- Expandable architecture supports stacking for higher wattage or redundant configurations.
Usually Ships in 2-3 Weeks Free shipping over $499$1,095.00 $719.99 Save $375.01 -
Save $345.01
Add to Cart The item has been addedLifesafety Power FPO250/250-E2 Expandable dual voltage system 20A
250W expandable dual voltage power supply rated for 20A at 12V or 10A at 24V output
- Delivers 250W with 20A at 12V or 10A at 24V to support mixed-voltage device loads.
- Expandable design supports daisy-chaining for multi-zone sites requiring higher total current.
- E2 enclosure fits standard 19-inch rack and wall-mount installations in equipment rooms.
Usually Ships in 2-3 Weeks Free shipping over $499$1,006.00 $660.99 Save $345.01 -
Save $403.01
Add to Cart The item has been addedLifesafety Power FPO250/250-C8D8E2 FPO250/250-C8D8E2
250W dual-output power supply housed in an E2 enclosure, delivering 20A at 12V or 10A at 24V on two independent channels
- Dual 250W channels each supply 20A at 12V or 10A at 24V independently.
- 16 individually fused 3A output circuits prevent cascade failures across lock loads.
- 8 fused lock outputs and 8 aux outputs support mixed strike, mag-lock, and sensor loads.
Usually Ships in 2-3 Weeks Free shipping over $499$1,176.00 $772.99 Save $403.01 -
Save $840.01
Add to Cart The item has been addedLifesafety Power FPO250/250-B1002C82D8E6M1 250W power supply 20A
250W power supply built for access control and life-safety systems that require fused, supervised outputs for electric locks and auxiliary devices
- Delivers 20A@12VDC or 10A@24VDC to support mid-scale multi-door lock deployments.
- Eight relay outputs are individually fused at 3A with per-output FAI, failsafe, or failsecure mode.
- Eight auxiliary DC outputs are Bus1/Bus2 assignable, supporting multi-bus campus architectures.
Usually Ships in 2-3 Weeks Free shipping over $499$2,448.00 $1,607.99 Save $840.01 -
Save $530.01
Add to Cart The item has been addedLifesafety Power FPO250/250-B1002D8E4M1 250W power supply 20A/12
250W regulated power supply designed for multi-camera and access-control deployments requiring dual-voltage flexibility
- Delivers 20A at 12VDC or 10A at 24VDC via jumper selection for mixed-voltage sites.
- Eight independently fused 3A outputs with Bus1/Bus2 switching isolate load faults per branch.
- Fixed 250W output suits stable-grid installs where UPS protection is managed separately.
Usually Ships in 2-3 Weeks Free shipping over $499$1,547.00 $1,016.99 Save $530.01 -
Save $1,020.01
Add to Cart The item has been addedLifesafety Power FPO250/250-B10010D8NLCE8M2 250W power supply
250W power supply with dual selectable outputs—20A at 12VDC or 10A at 24VDC
- Dual-bus outputs deliver 12VDC@20A or 24VDC@10A from one cabinet.
- Eight 3A auxiliary outputs each assign independently to Bus 1 or Bus 2.
- E8 enclosure (36H×30W×6.5D in) supports B100 battery backup and NLC supervision.
Usually Ships in 2-3 Weeks Free shipping over $499$2,973.00 $1,952.99 Save $1,020.01 -
Save $804.01
Add to Cart The item has been addedLifesafety Power FPO250/250-4D8PE8M2 FPO250/250-4D8PE8M2
250W redundant power supply designed for multi-camera security installations where simultaneous power distribution across isolated circuits is
- Dual independent 4A outputs isolate circuit faults so one zone failure won't cascade.
- 250W redundant architecture sustains multi-camera deployments through single PSU failure.
- 19-inch rack-compatible form factor integrates cleanly into standard head-end enclosures.
Usually Ships in 2-3 Weeks Free shipping over $499$2,345.00 $1,540.99 Save $804.01 -
Save $371.01
Add to Cart The item has been addedLifesafety Power FPO250/250-4D8PE2 2 x 250W power supply 8 relay
Dual-channel power supply designed to deliver redundant DC power to networked security systems across distributed installations
- Two independent 250W channels, each selectable 12VDC/20A or 24VDC/10A, support mixed fleets.
- Four Class 2 auxiliary outputs at 2.5A each isolate sensor and access control loads from camera power.
- Per-output Bus1/Bus2 assignment partitions zones across separate supervision circuits without extra relays.
Usually Ships in 2-3 Weeks Free shipping over $499$1,083.00 $711.99 Save $371.01 -
Save $2,181.01
Add to Cart The item has been addedLifesafety Power FPO250/250-4C84D8E12S 500W Dual Voltage 120 VAC
500W dual voltage power supply rated for 120 VAC input
- 500W dual-voltage supply consolidates power for up to 32 relay lock outputs.
- 32 auxiliary outputs support mixed mag locks, door strikes, and peripheral devices.
- 120 VAC input suits standard branch circuits; verify upstream UPS capacity at 500W.
Usually Ships in 2-3 Weeks Free shipping over $499$6,358.00 $4,176.99 Save $2,181.01 -
Save $3,163.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3C8P5D8PE12M/P24-A Power Supply Board
UL-listed power supply and access control module platform delivering 500W total output across dual-voltage channels
- 64 UL-listed outputs (24 relay lock + 40 aux) on dual 12V/24V buss cut panel count.
- 2.5A Class 2 per channel with failsafe/failsecure programming suits mixed lock hardware.
- Integrated fire disconnect, battery charger, and fault contacts reduce external relay wiring.
Usually Ships in 2-3 Weeks Free shipping over $499$9,218.00 $6,054.99 Save $3,163.01 -
Save $3,073.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3C85D8PE12M-WP-MAY01 FPO250/250-3C85D
Dual-output, 2 × 250W redundant power supply designed for mission-critical surveillance and access control installations where uptime is
- Dual 250W redundant outputs keep systems live if one supply fails.
- Simultaneous 12VDC and 24VDC rails support mixed camera and lock loads.
- Handles up to ~20A at 12VDC or ~10A at 24VDC for large installations.
Usually Ships in 2-3 Weeks Free shipping over $499$8,956.00 $5,882.99 Save $3,073.01 -
Save $3,163.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3C85D8PE12M/P24-C 250W power supply
250W dual-voltage access control power supply rated for 20A at 12V or 10A at 24V output — built to drive multiple relay-controlled electric strikes
- Delivers 250W dual-voltage output (12V/20A or 24V/10A) to match lock and reader hardware.
- Eight fused relay outputs allow per-door failsafe or failsecure assignment from a single unit.
- Eight 2.5A auxiliary outputs support readers, REX sensors, and indicators across two buses.
Usually Ships in 2-3 Weeks Free shipping over $499$9,218.00 $6,054.99 Save $3,163.01 -
Save $2,276.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3C83D8E12M 250W power supply 20A/12V
250W centralized power supply and relay distribution module designed for access control and door lock integration
- Delivers 20A at 12VDC or 10A at 24VDC from a single 250W supply.
- 24 relay outputs plus 24 aux outputs, each fused at 3A, cover 24 doors.
- Per-relay failsafe or failsecure config eliminates external relay modules.
Usually Ships in 2-3 Weeks Free shipping over $499$6,634.00 $4,357.99 Save $2,276.01 -
Save $2,725.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3C83D8PE12M/P24-A LSP Product ProWire
500W dual-voltage power distribution unit built for Mercury ProWire access control and door strike systems
- 500W dual-voltage unit drives 24 relay lock outputs and 24 auxiliary control outputs.
- Consolidates mid- to large-scale lock power distribution from a single 120 VAC input.
- Dry relay contacts require a dedicated 24 VDC secondary supply per strike or lock.
Usually Ships in 2-3 Weeks Free shipping over $499$7,943.00 $5,217.99 Save $2,725.01 -
Save $2,883.01
Add to Cart The item has been addedLifesafety Power FPO250/250-3C83D8PE12M/T24-A 250W power supply
250W power supply designed for access control and lock management in mid-scale deployments
- Dual-voltage output (12VDC/20A or 24VDC/10A) replaces legacy or standardized lock systems.
- Eight relay outputs, each 3A fused with per-channel failsafe or failsecure selection.
- Eight Class 2 auxiliary outputs at 2.5A each route to Bus1 or Bus2 for distributed sensors.
Usually Ships in 2-3 Weeks Free shipping over $499$8,401.00 $5,517.99 Save $2,883.01