i-PRO

i-PRO

SKU: VITRAN-BAS-INSTL

I-Pro For School Bus Car Or Single Cabin - Vitran-Bas-Instl

• Covers mounting, wiring, and configuration for school bus or single-cabin deployments.
• Handles 12V/24V power integration with proper fusing for mobile electrical systems.
• Includes GPS, event trigger setup, and ignition-cycle verification for ViTRAN systems.

i-PRO

SKU: TRTN-CL3

i-PRO TRTN-CL3 - Secure 3 Years of Access to Triton Cloud

• Three-year access entitlement eliminates annual renewal overhead for agency procurement.
• Built-in chain-of-custody audit logging simplifies court discovery and compliance reporting.
• Cloud-native sharing workflows support prosecutor and inter-agency evidence handoff securely.

i-PRO

SKU: NDE80TSPA626SPA6-1

i-PRO NDE Networked or Offline Lock - CY - NDE80TSPA626SPA6-1

• Operates networked or offline, preserving access permissions during connectivity loss.
• ANSI/BHMA Grade 1 rated; field-reversible handing reduces installation SKU complexity.
• Supports iCLASS SE, Multiclass, and MIFARE credentials on a single NDAA-compliant reader.

i-PRO

SKU: STL2

i-PRO Lenovo ST250 Tower Chassis (do NOT Sell Standalone. - STL2

• Factory-validated for i-PRO recorder software, eliminating field compatibility issues.
• Lenovo ST250 tower chassis is thermal-rated for 24/7 continuous surveillance recording duty.
• Standardized platform simplifies multi-site rollouts and consolidates warranty management.

i-PRO

SKU: MX-O-SMA-S-6D016

i-PRO MX-O-SMA-S-6D016 Sensor Module Fisheye Camera

• 180° fisheye FOV from a single 1 MP sensor reduces camera count in open areas.
• IP66-rated housing withstands dust and water jets for indoor or outdoor deployment.
• 802.3af PoE eliminates auxiliary power supplies, simplifying multi-camera cabling.

i-PRO

SKU: MC-UPG-A-921

i-PRO Reader: R10/RP10 Iclass/multiclass - MC-UPG-A-921

• Upgrades R10/RP10 readers to iCLASS SE and multiclass support without hardware swap.
• Dual-frequency 13.56 MHz + 125 kHz prox covers legacy and modern credentials in one unit.
• OSDP, Wiegand, and RS-485 outputs integrate with existing access control infrastructure.

i-PRO

SKU: PQKV10062Z

i-PRO Front Cover - PQKV10062Z

• Genuine OEM part restores original IP rating and weatherproof seal integrity.
• Exact factory tolerances ensure proper gasket compression and lens alignment.
• Powder-coated stamped steel/aluminum construction provides UV-resistant durability.

i-PRO

SKU: MC-FPV4-E2M/4TX

i-PRO Powersupply: FPV4-E2M/4TX 4DR 6A/12V OR - MC-FPV4-E2M/4TX

• Delivers 6A at 12VDC across 4 fused outputs for reliable multi-door power distribution.
• Per-output overcurrent protection isolates faults without disrupting adjacent access points.
• NDAA-compliant enclosed cabinet rated -20°C to +49°C suits mechanical rooms and IT closets.

i-PRO

SKU: PLCD9C/2

i-PRO 9.7 Inch High Resolution Color LED Monitor Rack - PLCD9C/2

• 9.7-inch color LED panel delivers consistent brightness for rack-based video verification.
• Fits standard 19-inch rack enclosures, keeping monitoring co-located with NVRs and switches.
• Compact form factor frees rack units for additional network or recording equipment.

i-PRO

SKU: MC-9520

i-PRO Credintial: 9520 Schlage Mifare Classic Smart - MC-9520

• Mifare Classic 1K at 13.56 MHz ensures fast, reliable reads on Schlage AD-400 and NDE readers.
• Pre-encoded ISO card format drops into existing badge holders and Schlage card management workflows.
• NDAA-compliant credential supports enterprise procurement requirements without reader replacement.

i-PRO

SKU: MERCURY-EP1501

i-PRO MERCURY-EP1501 Intelligent Controller with PoE

• Supports H.265, H.264, and MJPEG codecs for flexible mixed-camera deployments.
• Integrated 802.3af PoE eliminates separate power runs to compatible endpoints.
• Ceiling and rack mount options suit both distributed sites and centralized SOCs.

i-PRO

SKU: MC-8543

i-PRO MC-8543 DESFire EV3 Cards - 4K - ISO - ISO glossy white

• AES-128 mutual authentication resists cloning and replay attacks on access control.
• Multi-application file system consolidates access, payment, and attendance on one card.
• ISO ID-1 form factor at 13.56 MHz drops into existing DESFire EV1/EV2 reader installs.

i-PRO

SKU: PML4386

i-PRO Leica Type Zoom Video Adapter F=43-86MM - PML4386

• Leica-type mount enables integration of premium glass into i-PRO camera platforms.
• 43–86mm zoom range supports flexible framing from standard to moderate telephoto.
• Parfocal mechanical construction maintains focus integrity throughout zoom adjustments.

i-PRO

SKU: MX-O-SMA-S-6D237

i-PRO MX-O-SMA-S-6D237 Sensor Module S16/M16 S15/M15 with HD

• HD sensor upgrades S16/M16 and S15/M15 bodies without replacing the full camera.
• Field-swappable module cuts downtime; existing cabling and network config stay intact.
• Camera body auto-recognizes the new sensor, preserving VMS and analytics integration.

i-PRO

SKU: MC-75-B100C4D8PE-4

i-PRO Powersupply: FPO75-B100C4D8PE4M 75W - MC-75-B100C4D8PE-4

• 75 W output suits small-to-medium door counts without over-provisioning closet space.
• Selectable 12 VDC/24 VDC output accommodates mixed lock and reader hardware on one supply.
• Individual fused channels plus AC-fail and tamper outputs enable panel-monitored fault isolation.

i-PRO

SKU: PLCD24HD

i-PRO 24 Inch HD LCD Monitor 1920 X 1200 - PLCD24HD

• 1920×1200 native resolution adds pixel rows that 4-up and 9-up camera grids need.
• 16:10 aspect ratio keeps UI chrome from crowding the active video area.
• HDMI, DisplayPort, and DVI inputs connect directly to standard VMS workstations.

i-PRO

SKU: MC-T3MB777K1D

i-PRO MC-T3MB777K1D Altronix T3MB777K1

• Selectable 12V DC/24V AC output at 6A/150W supports mixed camera deployments.
• Centralized multi-output distribution eliminates individual wall transformers per camera.
• NDAA-compliant enclosed cabinet operates reliably from -20°C to +49°C.

i-PRO

SKU: MC-5395-CK100

i-PRO Reader: Black Wall Switch HID Thinline - MC-5395-CK100

i-PRO

SKU: MC-150/250-3D8P2-2

i-PRO Powersupply: - MC-150/250-3D8P2-2

• 8 individually fused outputs isolate faults, protecting the full camera bus during failures.
• Selectable 12V DC / 24V AC output at 10A / 250W flexes across mixed camera and access control loads.
• NDAA-compliant enclosed cabinet rated –20°C to +49°C suits outdoor closets and rack deployments.

i-PRO

SKU: MC-150-B100D8PM8

i-PRO Powersupply: FPO150-B100D8PM8NL4E4M - MC-150-B100D8PM8

• 150 W regulated DC output supports strikes, maglocks, readers, and accessories on one bus.
• Selectable 12 VDC/24 VDC output with individually fused channels protects each connected device.
• Battery-backed design with AC-fail and tamper outputs enables monitored, code-compliant deployment.