i-PRO products
-
i-PRO
SKU: MC-BL3
i-PRO Altronix BL3 Battery Leads 18 Inch 18AWG Pair RED - MC-BL3
- Pre-terminated 18-inch leads eliminate field stripping and reduce wiring errors.
- 18AWG conductors handle current demands of 12V/24V sealed lead-acid batteries.
- Red jacket enables instant polarity identification during install and maintenance.
$4.69 $3.99 Save $0.70The item has been added -
i-PRO
SKU: MC-150-B100C8D8-1
i-PRO Powersupply: FPO150-B100C8D8PE6M 150W - MC-150-B100C8D8-1
- 150W continuous output supports PTZ motors and multi-camera loads without voltage sag.
- Over-current and short-circuit protection prevents downstream equipment damage on faults.
- Compact form factor integrates cleanly into equipment closets, racks, or enclosures.
$1,608.00 $1,258.99 Save $349.01The item has been added -
i-PRO
SKU: MC-921PTNNEK00000
I-Pro Rdr RPK40 Multiclass Se Rev E Kpd Std - MC-921PTNNEK00000
- Reads 125 kHz prox and 13.56 MHz iCLASS SE/MIFARE in one device, eliminating reader swaps during migration.
- Wiegand, RS-485, and OSDP outputs ensure compatibility with virtually all commercial access control panels.
- Rated –30°C to +65°C with NDAA compliance, supporting exterior installs in regulated federal environments.
$23.04 $16.99 Save $6.05The item has been added -
i-PRO
SKU: IPS-SRV-UDE-12TB-A
I-pro UDE Hybrid Server/storagefor T3 - IPS-SRV-UDE-12TB-A
- Pre-loaded UDE stack unifies body-worn, in-car, and fixed-camera ingest on one chassis.
- 12 TB hybrid storage supports Tier 3 retention with chain-of-custody and audit logging built in.
- Cybersecurity-hardened image and H.265 hardware decode suit agency network deployment requirements.
$22,355.00 $19,213.99 Save $3,141.01The item has been added -
i-PRO
SKU: MC-75-D8PE4M-1
i-PRO FPO75-D8PE4M ; 1 X FPO75 75W Total Output - MC-75-D8PE4M-1
- 75 W output right-sizes power for small door counts without over-provisioning.
- Selectable 12/24 VDC output with individually fused channels protects each device.
- Battery-charging circuit and AC-fail output support monitored, backed-up operation.
$748.00 $585.99 Save $162.01The item has been added -
i-PRO
SKU: IPS-LIS-1-4TB
I-pro Legacy Interface Server Unit Includes 1X - IPS-LIS-1-4TB
- 4 TB of onboard storage keeps moderate legacy archives accessible during migration.
- Bridges older i-PRO/Panasonic recording systems to the current evidence-management platform.
- Rack-mount appliance form factor integrates cleanly into existing IT infrastructure.
$3,011.36 $2,082.99 Save $928.37The item has been added -
i-PRO
SKU: MC-7410
I-Pro Credential: 7410 Proximity Card Clamshell - MC-7410
- 125 kHz proximity technology ensures compatibility with legacy and current readers.
- Clamshell form factor resists bending and antenna breaks in high-wear deployments.
- Slot-punch ready design supports lanyard or badge reel attachment out of the box.
$4.99The item has been added -
i-PRO
SKU: IPS-CLR-SYNC-1Y
i-PRO Automatically Generate Cases IN - IPS-CLR-SYNC-1Y
- Automates case file assembly from alarm and analytics triggers across i-PRO networks.
- One-year subscription delivers continuous evidence sync and chain-of-custody tracking.
- Consolidates clips, metadata, and timestamps from multi-site cameras into export-ready packages.
$90.00 $89.99 Save $0.01The item has been added -
i-PRO
SKU: IPS-BWC-MNT-QMOLLE
I-pro BWC KF Quad Molle System Dock. 4 - IPS-BWC-MNT-QMOLLE
- Four MOLLE attachment points keep the camera secure during high-movement scenarios.
- Compatible with BWC MK3 magnet-plate system for consistent fleet-wide standardization.
- Integrates with existing duty vest MOLLE webbing without modification or extra hardware.
$20.00 $19.99 Save $0.01The item has been added -
i-PRO
SKU: MC-150/250-2C83D-4
i-PRO Powersupply: FPO150/250-2C83D8PE8M2 - MC-150/250-2C83D-4
- Delivers up to 250W at 10A from a single enclosed cabinet, eliminating per-camera injectors.
- Selectable 12V DC or 24V AC output supports mixed access control and CCTV device deployments.
- NDAA-compliant design rated for –20°C to +49°C suits indoor closets and outdoor enclosures.
$2,627.00 $2,056.99 Save $570.01The item has been added -
i-PRO
SKU: MC-150-B100C82D8-1
i-PRO Powersupply: - MC-150-B100C82D8-1
- 150 W output handles multiple maglocks or strikes simultaneously without rail sag.
- Selectable 12 VDC / 24 VDC output adapts to mixed lock and reader hardware on one supply.
- Battery-backed with AC-fail and tamper relays for continuous panel-monitored life-safety power.
$1,850.00 $1,448.99 Save $401.01The item has been added -
i-PRO
SKU: XCC-ADV-ENT
i-PRO Thinksystem Xclarity Controller Advanced TO - XCC-ADV-ENT
- Out-of-band access gives full hardware control independent of server OS state.
- Remote power cycling and console redirection eliminate truck rolls to failed nodes.
- Delivered as an electronic license key for immediate activation on ThinkSystem servers.
$92.80 $63.99 Save $28.81The item has been added -
i-PRO
SKU: ARB-HT3N
I-Pro MK3 Arb 900 MHZ Wireless Mic Partial Mic Kit TX - Arb-HT3N
- 900 MHz operation avoids Wi-Fi and Bluetooth congestion in dense commercial environments.
- Partial kit format lets integrators select receiver and antenna components per site requirements.
- Compatible with i-PRO camera systems for synchronized audio-video capture in evidence-grade installs.
$459.99The item has been added -
i-PRO
SKU: IPS-SRV-RED-T5-STD
I-pro Redaction Tower Server FOR UP TO 5 - IPS-SRV-RED-T5-STD
- Handles automated redaction for up to 5 simultaneous camera channels.
- Tower form factor fits equipment rooms without rack infrastructure.
- Preserves original footage while outputting separate redacted copies for sharing.
$8,320.00 $7,152.99 Save $1,167.01The item has been added -
i-PRO
SKU: AGC20003GM
i-PRO Panasonic 3M Camera Head Cable FOR AG-MDC10G - AGC20003GM
- 3-meter reach separates AG-MDC10G camera head from processor for tight-space installs.
- Factory-terminated connectors carry video, power, and control signals without field termination.
- NDAA compliant; integrates directly into i-PRO modular camera ecosystem architecture.
$375.00 $279.99 Save $95.01The item has been added -
i-PRO
SKU: IPS-CLR-SYNC-1D
i-PRO Automatically Generate Cases IN - IPS-CLR-SYNC-1D
- Auto-generates structured case records on intrusion, line-crossing, or loitering triggers.
- Bidirectional sync packages timestamp, camera ID, event type, and video clips per case.
- Configurable event filtering suppresses nuisance alarms while preserving audit-ready chain of custody.
$0.99The item has been added -
i-PRO
SKU: 3DA003848CAA
i-PRO Cover Replacement Dome for the WV-CW864 - 3DA003848CAA
- OEM dome engineered exclusively for the WV-CW864 PTZ, ensuring precise optical fit.
- Restores IP66-rated weather sealing without replacing the full camera assembly.
- Matched IR transmission profile maintains consistent low-light surveillance performance.
$51.41 $50.99 Save $0.42The item has been added -
i-PRO
SKU: IPS-BWC-MNT-MCLAMP
I-pro BWC KF Garment Mini Clamp Dock NO - IPS-BWC-MNT-MCLAMP
- Mini garment clamp mounts to shirt plackets and lapels where MOLLE mounts won't fit.
- Compatible with BWC MK3 magnet-plate system for consistent, tool-free camera attachment.
- Spring-loaded jaws with smooth interior surfaces hold thin fabric edges without damage.
$29.00 $28.99 Save $0.01The item has been added -
i-PRO
SKU: WS-TL-1-VW-V7
I-pro STL-1 1X Xeon 6C/12T CPU 32GB RAM Windows - WS-TL-1-VW-V7
- Xeon 6C/12T CPU with 32GB DDR4 ECC RAM handles concurrent AI analytics streams.
- Windows IoT Enterprise pre-installed removes OS licensing steps at deployment.
- Dual GbE and tower/rack form factor integrates into existing IT infrastructure.
$7,050.00 $4,848.99 Save $2,201.01The item has been added -
i-PRO
SKU: ARB-BWC3MAG-M
i-PRO BWC MK3 Main Magnet Plate - ARB-BWC3MAG-M
- OEM magnet plate ensures verified fit and retention for i-PRO BWC MK3 fleets.
- Compatible with all MK3 mount accessories: MOLLE, clamp, garment hook, and more.
- Stock as a spare part to restore camera retention without taking units offline.
$85.00 $84.99 Save $0.01The item has been added
