Installation Hardware
Showing Results for Installation Hardware
-
Hanwha
SKU: AM09-001243B
Hanwha See PM before ordering. requires $15 shi
$24.18 $23.99 Save $0.19The item has been added -
Pelco
SKU: ACMICR-1001
Pelco ACMICR-1001 Internal Microphone Sarix Pro 4
OEM internal microphone for Pelco Sarix Pro 4 Dome cameras
- Factory-matched pinout and impedance for native audio integration
- Installs using standard Sarix Pro 4 procedures with no extra tooling
- NDAA Section 889 compliant for government security deployments
$10.50 $9.99 Save $0.51The item has been added -
Pelco
SKU: ES-BLADE-2
Pelco ES-BLADE-2 Esprit PTZ Replacement Wiper Blades
OEM wiper blades for Pelco Esprit PTZ cameras—two-pack replacement
- Eliminates streaking and skipping during automated wash cycles
- Field-serviceable installation without removing camera from mount
- OEM-engineered rubber composition for outdoor surveillance duty
$28.94 $27.99 Save $0.95The item has been added -
Pelco
SKU: IBD3-FP
Pelco IBD3-FP Front Panel Kit White
Replacement front panel for Pelco IBD3 corner cameras in white
- Direct replacement panel for IBD3 models extends camera lifespan
- Pantone 427C white finish matches IBD3 design specifications
- NDAA Section 889 compliant for detention and behavioral health facilities
$288.27 $214.99 Save $73.28The item has been added -
Pelco
SKU: IBD3-FPSS
Pelco IBD3-FPSS Front Panel Kit Stainless Steel
Stainless steel replacement front panel for Pelco IBD3 corner camera
- Corrosion-resistant stainless steel construction for high-security facilities
- Direct replacement for standard IBD3 front panel, installs without modification
- Resists tampering and chemical exposure in detention and behavioral health settings
$355.05 $263.99 Save $91.06The item has been added -
Pelco
SKU: MF00-9480-111A
Pelco MF00-9480-111A G-Gasket Set ESTX Housing
OEM replacement gasket set for Pelco ESTX camera housings
- Compression-molded elastomer seals lid-to-body interface against moisture
- Replace when housing opened for service or visible degradation observed
- Compatible with Pelco ESTX housings in outdoor surveillance deployments
$33.99The item has been added -
Add to Cart The item has been addedPelco
SKU: RC-WAA4
Pelco RC-WAA4 Marine-Grade Wiper Blade Replacement
Marine-grade wiper blade for Pelco Aeron Series coastal surveillance
- Corrosion-resistant materials withstand salt air and high-humidity environments
- Genuine OEM replacement maintains factory compatibility with Aeron housings
- Consumable part for scheduled maintenance to preserve lens clarity and image quality
In stock · Ships same business day$253.01 $187.99 Save $65.02The item has been added -
Pelco
SKU: VX-S2-HDTRAY
Pelco VX-S2-HDTRAY Empty HD Carrier Tray
Hot-swap HD carrier tray for VxStorage Series 2 E and T chassis
- Hot-swap connector design installs drives without taking NVR offline
- Compatible with VxStorage Series 2 E expansion and T tower models
- NDAA Section 889 compliant for regulated surveillance deployments
$47.70 $46.99 Save $0.71The item has been added -
Pelco
SKU: WASEX2T4IC
Pelco WASEX2T4IC ExP Tank 10L IECEx Pipe Assembly
- IP66-rated enclosure withstands high-pressure washdowns and salt-spray environments.
- IECEx Group II certification covers explosive atmospheres without site variance approvals.
- Integrated pipe assembly eliminates field threading, reducing leak points and install time.
$2,226.00 $1,653.99 Save $572.01The item has been added
Installation Hardware
Installation hardware includes mounting components, fasteners, and structural support elements used in surveillance, intercom, and access control deployments. Selecting the right hardware ensures stable mounting, clean cable routing, and long-term system durability.
Plan Your Deployment
- Surface type and structural support requirements
- Device weight and mounting load considerations
- Indoor vs outdoor corrosion resistance needs
- Standardization across multi-site projects
- Future service access and hardware replacement planning
Installation Hardware — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 11 working models of installation hardware sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP |
| Connectivity | Wired |
| Power | PoE |
| Type | Accessory |
| Night Vision | Yes |
| Compression | H.265 |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.