Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
Pelco
SKU: AG3Z2812TCS-MPWIR-MSI
Pelco AG3Z2812TCS-MPWIR-MSI 6MP IR CS Lens
2.8–8.5mm varifocal CS lens with F1.2 aperture for 6MP IR surveillance
- F1.2 maximum aperture maximizes light in low-light and night operations
- Automatic IR focus correction eliminates day/night manual refocus cycles
- CS-mount design integrates with Sarix Pro 3 box camera platforms
$318.15 $236.99 Save $81.16The item has been added -
Pelco
SKU: DMSBL-1001
Pelco DMSBL-1001 Smoked Dome Bubble 4.7in
4.7" smoked dome bubble for Pelco housings, IK09 rated
- Smoked polycarbonate obscures lens direction for discreet surveillance
- IK09 vandal rating withstands harsh outdoor and high-traffic environments
- Reduced light transmission adds privacy layer and visual deterrence
$54.60 $53.99 Save $0.61The item has been added -
Pelco
SKU: DMSLD-1001
Pelco DMSLD-1001 Weathershield Large Outdoor Dome
Weathershield for large outdoor domes—reduces rain impact and heat
- Direct-mount design installs above dome without camera modification
- Maintains optical clarity during heavy rain and intense solar exposure
- Compatible with large Pelco outdoor dome cameras and wiper systems
$31.50 $30.99 Save $0.51The item has been added -
Pelco
SKU: DMSLD-1201
Pelco DMSLD-1201 Weathershield Dual-Head Dome
Single weathershield for dual-head domes; blocks rain and solar heat
- Unified protection across both camera optics reduces thermal stress
- Compatible with optional dual wipers per head for heavy rainfall
- IP67/IP68 rated housing for outdoor commercial and industrial use
$47.25 $46.99 Save $0.26The item has been added -
Pelco
SKU: DTWRX
Pelco DTWRX RS485 Washer Controller for WASPT
RS485 washer controller for Pelco WASPT window cleaning system
- RS485 command interface integrates with cameras and external control systems
- On-demand and timed cycle modes for automated or manual window clearing
- NDAA Section 889 compliant for government surveillance installations
$59.36 $58.99 Save $0.37The item has been added -
Pelco
SKU: EC20
Pelco EC20 Ceiling Mount for EH20 Camera Housings
Rigid steel ceiling mount for Pelco EH20 camera housings
- Mounts to soffits, overhangs, and covered walkways where wall brackets won't fit
- Purpose-built rigid steel construction for stable EH20 series enclosure support
- NDAA Section 889 compliant for government and federal security deployments
$310.53 $221.99 Save $88.54The item has been added -
Pelco
SKU: EG3Z3915KCS-MPWIR-MSI
Pelco EG3Z3915KCS-MPWIR-MSI CS Mount Lens
- 2.8–8.5mm varifocal range covers wide lobbies to mid-distance plate reads on one lens.
- Invisible 940nm IR with auto Day/Night enables covert 24/7 coverage in light-sensitive sites.
- PoE 802.3af (<13W) plus H.264/H.265 and ONVIF simplify infrastructure and VMS integration.
$273.00 $202.99 Save $70.01The item has been added -
Pelco
SKU: EG3Z3915TCS-MPWIR-MSI
Pelco EG3Z3915TCS-MPWIR-MSI 4K IR Varifocal Lens
3.9–10mm varifocal CS-mount lens for 4K surveillance with IR correction
- F1.5 aperture maximizes light in low-light and night-vision monitoring
- IR day/night focus compensation maintains sharpness across visible and thermal
- Compatible with 1/1.8″ sensors up to 8 MP for 4K resolution imaging
$399.00 $296.99 Save $102.01The item has been added -
Pelco
SKU: EG6Z0915TCS-MPWIR-MSI
Pelco EG6Z0915TCS-MPWIR-MSI 9-135mm IR Lens
9-135mm varifocal CS-mount lens with IR correction for megapixel cameras
- 9-135mm varifocal zoom eliminates need for lens changes in fixed installations
- IR-corrected optics prevent focus shift during day/night mode transitions
- Megapixel-optimized optics work with Pelco Sarix Pro 3 and CS-mount systems
$598.50 $409.99 Save $188.51The item has been added -
Add to Cart The item has been addedPelco
SKU: EH14
Pelco EH14 IP66 Camera Housing Megapixel Window
IP66 outdoor housing with megapixel-grade window for fixed cameras
- IP66 rating blocks dust and high-pressure water jets for wash-down sites
- Megapixel optical window maintains clarity at high resolutions without degradation
- Mounts to wall, ceiling, or pole; operates –40° to 60°C for extreme climates
In stock · Ships same business day$61.22 $60.99 Save $0.23The item has been added -
Add to Cart The item has been addedPelco
SKU: EH14-2
Pelco EH14-2 IP66 Outdoor Camera Housing
IP66 outdoor housing for legacy cameras with megapixel-grade glass
- IP66 rating withstands direct spray, dust, and industrial washdown
- Megapixel-grade borosilicate window preserves resolution on 5MP+ cameras
- 24 Vac input with optional heater and blower modules for -40°C operation
In stock · Ships same business day$116.87 $115.99 Save $0.88The item has been added -
Pelco
SKU: EH14-3
Pelco EH14-3 IP66 Outdoor Camera Housing 230Vac
IP66 outdoor housing with 230Vac power and megapixel optics
- IP66-rated protection against dust and water immersion for outdoor
- Megapixel-grade optical window preserves high-resolution image quality
- Heater/blower compatible for operation in extreme temperature ranges
$160.27 $159.99 Save $0.28The item has been added -
Add to Cart The item has been addedPelco
SKU: EH20
Pelco EH20 IP66 Outdoor Camera Housing
IP66 housing for fisheye cameras in temperate outdoor settings
- IP66-rated dust and rain protection without active heating or cooling
- PoE+ Class 3 single-cable power with H.265 and H.264 compression
- WDR and night vision down to 0.10 lux for variable lighting conditions
$159.16 $158.99 Save $0.17The item has been added -
Pelco
SKU: EH20-2-H
Pelco EH20-2-H Outdoor Housing Heater Blower 24Vac
IP66 weatherproof housing with 24Vac heater and blower for frost prevention
- Integrated heater maintains optics above condensation point in cold climates
- Active blower removes moisture to prevent lens fogging in humid environments
- Fits standard fixed box cameras; IP66 rating handles rain and dust ingress
$259.33 $185.99 Save $73.34The item has been added -
Pelco
SKU: EH20-3-H
Pelco EH20-3-H Outdoor Housing Heater Blower Sun Shield
IP66 outdoor housing with heater, blower, and sun shield for fixed box cameras
- Integrated heater and blower maintain optimal operating temperature in extreme weather
- IP66 rating protects against dust and high-pressure water jets in harsh environments
- Sun shield reduces solar heat loading and glare; feedthrough mount simplifies cable routing
$341.69 $244.99 Save $96.70The item has been added -
Pelco
SKU: EH20-P-H
Pelco EH20-P-H Outdoor Housing Heater Blower PoE
IP66 outdoor housing with integrated heater and blower, PoE powered
- Heater and blower maintain optimal temps in extreme weather conditions
- PoE+ or HPoE power eliminates need for AC circuits at mount location
- ONVIF-compliant for integration with any vendor's camera system
$407.36 $290.99 Save $116.37The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.