Connectivity & Media
Sub categories
Showing Results for Connectivity & Media
-
i-PRO
SKU: TGS-3DP-T20F
i-PRO 20 Feet Trigger Cable - TGS-3DP-T20F
- 20 ft (6.1 m) run eliminates field splicing between camera and control devices.
- Manufacturer-keyed connectors ensure correct pin mapping with i-PRO alarm I/O.
- NDAA compliant; verified for i-PRO/Panasonic HD camera and accessory systems.
$24.00 $23.99 Save $0.01The item has been added -
i-PRO
SKU: SPCA932/2
i-PRO 2M Cable F/GPUS932 Series HD Cameras - SPCA932/2
- Purpose-built 2 m cable ensures signal integrity for GPUS932 Series HD cameras.
- Factory-terminated, manufacturer-keyed connectors eliminate field termination errors.
- NDAA compliant; compatible across the full i-PRO GPUS932 camera family.
$810.00 $606.99 Save $203.01The item has been added -
i-PRO
SKU: IPS-SVR-PWRCORD-EU
I-pro AC Server Power Cord 8FT FOR Europe. - IPS-SVR-PWRCORD-EU
- CEE 7/7 Schuko plug mates directly to 230 V continental European mains outlets.
- IEC 60320 C13 connector matches i-PRO server and NVR appliance PSU inlets exactly.
- HAR-rated insulation and CE markings satisfy EU regulatory inspection requirements.
$45.00 $44.99 Save $0.01The item has been added -
i-PRO
SKU: RP-SDGD32DA2
i-PRO Arbitrator 32 GB Class 10 Sdhc Card - RP-SDGD32DA2
- 32 GB Class 10 SDHC rated for continuous-write workloads in the Arbitrator DVR.
- Surveillance-grade endurance handles wide in-vehicle temperature extremes reliably.
- Qualified compatibility eliminates DVR field failures from unvetted consumer cards.
$120.00 $119.99 Save $0.01The item has been added -
i-PRO
SKU: PGWD1901ZAC1
i-PRO Cable with Connector - PGWD1901ZAC1
- Factory-terminated connector eliminates field crimping errors and reduces callbacks.
- NDAA compliant design suits federally sensitive and government facility deployments.
- Compatible with i-PRO/Panasonic HD camera systems for interface, power, and signal runs.
$31.10 $30.99 Save $0.11The item has been added -
i-PRO
SKU: WV-QCA502
i-PRO I/o Cable FOR Aero PTZ - WV-QCA502
- Carries PTZ position feedback and relay signals without using the main video stream.
- Enables bidirectional I/O between Aero PTZ units and VMS alarm or automation systems.
- Connector and pinout are Aero-platform-specific, ensuring a secure, verified interface fit.
$129.42 $128.99 Save $0.43The item has been added -
i-PRO
SKU: IPS-LPR-ETH-SNSR
i-PRO IPS-LPR-ETH-SNSR ICV 25 Network Cable
- Purpose-built for i-PRO ICV 25 LPR systems, ensuring verified sensor and video compatibility.
- Supports 1080p (2 MP) video transmission for high-detail license plate capture over Ethernet.
- ONVIF-compliant design integrates with third-party NVRs and VMS platforms without custom config.
$30.00 $29.99 Save $0.01The item has been added -
i-PRO
SKU: ACPA12100-3389
i-PRO Lind Ac/dc Adapter Including Power Cord & - ACPA12100-3389
- Includes integrated power cord, eliminating sourcing delays during mobile deployments.
- Regulated AC/DC output protects camera and recording electronics from voltage spikes.
- Compact form factor supports concealed installation in vehicles and confined spaces.
$190.00 $189.99 Save $0.01The item has been added -
i-PRO
SKU: MOBOTIX-S16-BUNDLE
i-PRO MOBOTIX S16 Bundle Kit with Flex Cable
Modular 6MP camera kit with flex optical cable for custom integrations
- Interchangeable lens and sensor modules let you configure for retail, access control, or perimeter monitoring
- PoE powered with flexible optical cable included for installations in tight or congested spaces
- IP66 rated with wall/ceiling mount options and ONVIF compliance for standard VMS systems
$1,110.00 $1,037.99 Save $72.01The item has been added -
i-PRO
SKU: AGC20020GM
i-PRO Panasonic 20M Camera Head Cable FOR AG-MDC10G - AGC20020GM
- 20-meter run eliminates active repeaters between AG-MDC10G decoder and remote heads.
- Purpose-built for AG-MDC10G compatibility, avoiding impedance mismatch over long spans.
- Single 65-ft cable reach supports central rack deployments without topology redesign.
$650.00 $527.99 Save $122.01The item has been added -
i-PRO
SKU: 102-RJ00
i-PRO Wireless MIC RX Power Cable - 102-RJ00
- Dedicated power cable engineered for i-PRO wireless MIC RX receiver hardware.
- Prevents power-related audio dropouts in 24/7 mission-critical surveillance deployments.
- Supports rack-mounted and distributed receiver configurations in integrated AV systems.
$82.99The item has been added -
i-PRO
SKU: WV-QCA500APK
i-PRO WV-QCA500APK RJ45 Ethernet Cable 10-Pack
Waterproof RJ45 cables for outdoor surveillance, 10-pack
- Integrated waterproof connectors resist rain, humidity, and salt-air corrosion
- PoE (802.3af) support for powered i-PRO network cameras
- 10-pack quantity for multi-camera deployments and system expansion
In stock · Ships same business day$451.38 $304.99 Save $146.39 -
i-PRO
SKU: WV-QCA501APK
i-PRO WV-QCA501APK Multi I/O Cable
Factory-terminated multi-I/O cable for alarm, audio, and power integration
- Pre-assembled connectors for alarm input/output, bidirectional audio, and 12V DC power
- Color-coded and labeled conductors reduce installation time and wiring errors
- Plenum and riser-rated jacket meets building code compliance requirements
In stock · Ships same business day$631.96 $426.99 Save $204.97 -
i-PRO
SKU: WV-QCA503
i-PRO WV-QCA503 Multi I/O Cable for Alarm In/Out
Multi I/O cable for alarm and audio integration with WJ-NX/NU recorders
- Discrete alarm input/output terminals plus stereo audio on single connector
- Supports 12V DC and 24V DC power with stainless steel corrosion protection
- Wall, pole, or pipe mounting options; pre-stripped wires for fast deployment
$109.24 $108.99 Save $0.25The item has been added -
i-PRO
SKU: WV-QCA503PK
i-PRO WV-QCA503PK Multi I/O Cable 10-Pack
- Supports audio input for i-PRO cameras with multi I/O connectors.
- 10-cable pack reduces reorder frequency across multi-camera deployments.
- Spare cables on hand streamline field service and minimize downtime.
$912.38 $615.99 Save $296.39The item has been added -
i-PRO
SKU: WV-QCA504
i-PRO WV-QCA504 I/O Cable for Audio
- Provides dedicated audio input connectivity for external microphone integration.
- Designed specifically for compatible i-PRO cameras and recorders, ensuring fit.
- Enables integrated audio-video monitoring within existing i-PRO deployments.
$123.08 $122.99 Save $0.09The item has been added
Connectivity & Media
Connectivity and media components support reliable communication between cameras, access control devices, intercom systems, and network infrastructure. Proper cabling and connection hardware ensure stable performance, reduced signal loss, and long-term system reliability.
Plan Your Deployment
- Cable type selection (Ethernet, fiber, coaxial as applicable)
- Distance requirements and signal integrity planning
- Environmental considerations (indoor, plenum, outdoor-rated)
- Connector compatibility and termination standards
- Future expansion and structured cabling design
Connectivity & Media — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 2 working models of connectivity & media sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Type | Accessory |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.