Sub categories

Showing Results for Accessories

Compare

Out of stock
ACTi

SKU: PDCX-1111

ACTi Vandal Proof Smoked Dome Cover for - PDCX-1111
- Fits ACTi E918, E923, and E936 series domes with no adapters or rework required.
- Smoked polycarbonate obscures lens aim point, deterring casual tampering in high-traffic zones.
- Reduces sensor light intake ~10–15% vs. clear dome; adjust lighting design accordingly.
$122.00 $121.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$122.00 $121.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: R701-30001

ACTi Vandal Proof Transparent Dome Cover (for - R701-30001
- Polycarbonate barrier resists blunt force and intentional tampering attempts.
- Fits ACTi models I93–I97, I910, B916, and B917—verify model before ordering.
- No wiring required; installs over existing dome with provided mounting hardware.
$241.00 $178.99 Save $62.01

Add to Cart
The item has been added
Free shipping over $499

$241.00 $178.99 Save $62.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: ACS-E1CB-RETRO-KIT

ACTi Vandal Resistant IP Rated Voice Down - ACS-E1CB-RETRO-KIT
- Retrofit bracket mounts to existing ACTi domes without custom wiring harnesses.
- Vandal-resistant, IP-rated housing sustains outdoor and high-traffic deployments.
- Two-way audio output enables live voice-down communication through the camera.
$1,000.00 $864.99 Save $135.01

Add to Cart
The item has been added
Free shipping over $499

$1,000.00 $864.99 Save $135.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: PDCX-1106

ACTi Vandal Resistant Smoked Dome Cover for Mini - PDCX-1106
- Vandal-resistant smoked dome cover for ACTi Mini dome cameras
- Smoked polycarbonate hides camera pointing direction from view
- Drops onto standard ACTi Mini dome housing for vandal-prone zones
$108.00 $107.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$108.00 $107.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: ACS-ICB-RETRO-KIT

ACTi Vandal Resistant Voice Down With 18WATT - ACS-ICB-RETRO-KIT
- 18W power rating drives two-way audio without a separate amplifier in most deployments.
- Vandal-resistant housing withstands tampering at retail, loading dock, and outdoor gate sites.
- Retrofit module drops into compatible ACTi intercom systems, avoiding full hardware replacement.
$1,500.00 $907.99 Save $592.01

Add to Cart
The item has been added
Free shipping over $499

$1,500.00 $907.99 Save $592.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 003-0094-00

ACTi VHB Removal Tool - 003-0094-00
- Separates VHB-bonded ACTi camera mounts without damaging drywall or finished walls.
- Controlled mechanical separation prevents surface tears and adhesive residue during removal.
- Compatible with any ACTi camera or mount accessory installed via VHB adhesive bonding.
$15.26 $14.99 Save $0.27

Add to Cart
The item has been added
Free shipping over $499

$15.26 $14.99 Save $0.27

Add to quote Compare
Compare

Out of stock
ACTi

SKU: CTI-SRVCS-3HRS

ACTi Virtual Three Consecutive Hours Training - CTI-SRVCS-3HRS
- Three consecutive hours of live instructor-led training compresses ACTi deployment timelines.
- Covers system configuration, VMS workflows, and integration best practices in one session.
- Delivered virtually — requires only internet access, a device, and relevant system documentation.
$999.00 $873.99 Save $125.01

Add to Cart
The item has been added
Free shipping over $499

$999.00 $873.99 Save $125.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: PMAX-0366

ACTi Wall Mount with Built-in Junction Box (for Z9x - PMAX-0366
- OEM-fit wall mount ensures exact housing alignment for Z9x series cameras.
- Built-in junction box simplifies cable management and reduces installation time.
- Genuine ACTi part preserves host product warranty and original ingress ratings.
$197.00 $196.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$197.00 $196.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: WALL-MNT

ACTi WALL-MNT Camera Mount
- Wall-mount form factor suits hallways, entries, and perimeter points where ceiling mounting is impractical.
- Designed for ACTi professional-grade camera systems—verify interface compatibility before ordering.
- Supports standard fasteners for drywall, wood, or concrete surfaces to fit varied facility construction.
$145.00 $144.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$145.00 $144.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: CTS-WC110-UHHD

ACTi WEB Camera - High Definition 2.07MP / USB - CTS-WC110-UHHD
- 1080p / 2.07 MP resolution delivers clear video for conferencing and live capture.
- Single USB 2.0 cable carries both video and mic audio — no separate AV interface needed.
- Bus-powered plug-and-play design requires no drivers or external power supply.
$149.00 $148.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$149.00 $148.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: 185-00555

ACTi Wedge Vesa Wall Mount - Black - 185-00555
- VESA 75 and 100 mm compatibility eliminates custom brackets across camera families.
- Wedge angle provides built-in downward tilt, reducing glare in corridor deployments.
- Vendor-agnostic design mounts any standard VESA-pattern surveillance camera to walls.
$42.90 $41.99 Save $0.91

Add to Cart
The item has been added
Free shipping over $499

$42.90 $41.99 Save $0.91

Add to quote Compare
Compare

Out of stock
ACTi

SKU: DVINSTALL-WK-HOL

ACTi Weekend/holiday Install (sat & Sun) - DVINSTALL-WK-HOL
- Factory-trained crew performs on-site commissioning on Saturday and Sunday.
- Schedules around operational windows so live facilities avoid business-hour disruption.
- Standardized procedures and documented handoff ensure consistent quality across multi-site rollouts.
$2,999.00 $1,818.99 Save $1,180.01

Add to Cart
The item has been added
Free shipping over $499

$2,999.00 $1,818.99 Save $1,180.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: CTS-RM100-USBA

ACTi Whole Room Microphone Array - CTS-RM100-USBA
- Ceiling-mounted omnidirectional array covers rooms up to 25×20 ft with no dead zones.
- Automatic beamforming tracks active speakers and suppresses ambient noise without reconfiguration.
- Single USB connection simplifies cabling; supports ceiling and standard 19-inch rack mounting.
$449.00 $398.99 Save $50.01

Add to Cart
The item has been added
Free shipping over $499

$449.00 $398.99 Save $50.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: CTI-WFMOD-11AX

ACTi WIFI 6 Module - Dual Band Wireless FOR - CTI-WFMOD-11AX
- WiFi 6 (802.11ax) dual-band support enables deployment without running Ethernet cable.
- 5 GHz band option reduces interference in high-density wireless environments.
- Modular form factor installs directly into compatible ACTi device wireless slots.
$119.00 $118.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$119.00 $118.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: CTI-WFMOD-11AC

ACTi WIFI Module - Dual Band Wireless FOR - CTI-WFMOD-11AC
- Adds dual-band 2.4/5 GHz Wi-Fi and Bluetooth 4.0 to ACTi 6086U+ panels.
- Delivers up to 433.5 Mbps on 5 GHz via 802.11ac for high-throughput guest sessions.
- Auto-selects the least congested channel, reducing manual RF configuration overhead.
$119.00 $118.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$119.00 $118.99 Save $0.01

Add to quote Compare
Compare

Out of stock
ACTi

SKU: CTI-WFMOD-DBBT

ACTi WIFI Module - Dual Band Wireless FOR - CTI-WFMOD-DBBT
- Adds 802.11ac and 802.11n dual-band Wi-Fi to compatible ACTi modular cameras.
- Eliminates ethernet cabling in retrofit, overhead, or restricted-penetration sites.
- Configures via camera web interface; supports WPA2/WPA3 and DHCP or static IP.
$119.00 $118.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$119.00 $118.99 Save $0.01

Add to quote Compare

Accessories

Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Deployment Guide PoE Planning

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Sub categories

Showing Results for Accessories

Accessories

Deployment Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading