Sub categories

Showing Results for Accessories

Compare

Out of stock
Aiphone

SKU: GT-4B

Aiphone GT-4B 4-Module Back Box

Flush-mount back box for up to 4 Aiphone GT Series modules
- 4-module back box for up to four entrance modules in one enclosure
- Flush-mount install for recessed wall integration on entrance points
- 0.9 lb back box for multi-module entrance panel deployment
$32.00 $31.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$32.00 $31.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Aiphone

SKU: GTW-LC

Aiphone GTW-LC Multi-Relay Control Unit

20-relay control unit for GT Series intercoms and access doors
- Multi-relay control unit with 20 programmable outputs
- Wall-mount for Aiphone GT series intercom integration
- Flexible auxiliary device + access control switching
$514.00 $276.99 Save $237.01

Add to Cart
The item has been added
Free shipping over $499

$514.00 $276.99 Save $237.01

Add to quote Compare
Compare

Out of stock
Aiphone

SKU: IME-100

Aiphone IME-100 Gooseneck Microphone for IM System

Gooseneck mic for Aiphone IM intercom systems at service windows
- Gooseneck microphone with direct OU-100 attachment
- -46dB sensitivity optimized for close-range voice
- No separate audio cable runs required
$326.00 $175.99 Save $150.01

Add to Cart
The item has been added
Free shipping over $499

$326.00 $175.99 Save $150.01

Add to quote Compare
Compare

Out of stock
Aiphone

SKU: KA-DGR

Aiphone KA-DGR Stainless Steel Vandal-Resistant Housing

Stainless steel vandal housing for Aiphone KB-DAR door stations
- 304-grade stainless vandal-resistant housing
- Surface mount direct to wall for door stations
- 0.35 lb housing for outdoor exposure protection
$280.99

Add to Cart
The item has been added
Free shipping over $499

$280.99

Add to quote Compare
Compare

Add to Cart The item has been added
Aiphone

SKU: KMB-45

Aiphone KMB-45 45-Degree Mullion Mounting Bracket

45-degree mullion bracket for clean glass door station installs
- 45-degree mullion mounting bracket for door stations
- Reduces unwanted glass reflections at entry points
- Frames facial capture zone for vestibule entries
In stock · Ships same business day

$50.00 $49.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$50.00 $49.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
Aiphone

SKU: LE-B

Aiphone LE-B Semi Flush Mount Sub Station

2MP semi flush sub station for Aiphone intercom networks
- Semi-flush mount sub station for indoor intercom installs
- 1200x1200 high-res display for clear visitor identification
- Wall-mount form factor for tight install locations
$96.00 $95.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$96.00 $95.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Aiphone

SKU: LEF-10C

Aiphone LEF-10C 10-CALL Semi-flush Mountmaster

10-channel analog master station with selective calling for small intercom systems
- Supports up to 11 total intercom stations from a single master
- Voice and call tone volume controls with selective door release
- 12VDC flush-mount 10-call master station with press-to-talk audio
$636.00 $341.99 Save $294.01

Add to Cart
The item has been added
Free shipping over $499

$636.00 $341.99 Save $294.01

Add to quote Compare
Compare

Add to Cart The item has been added
Aiphone

SKU: MC-60/4A

Aiphone MC-60/4A MarketCom 4-Line Wall-Mounted Handset

4-line wall-mounted handset for MarketCom intercom systems
- MarketCom 4-line wall-mounted handset
- Supports 4 lines or extensions simultaneously
- Low-profile design for retail and admin spaces
In stock · Ships same business day

$166.00 $165.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$166.00 $165.99 Save $0.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
Aiphone

SKU: MC-A/A

Aiphone MC-A/A MarketCom Paging Adaptor

Multi-tenant paging adaptor for Aiphone MarketCom systems
- MarketCom paging adaptor for multi-tenant deployments
- Integrates with existing MarketCom system architecture
- Wall or pole mount for residential commercial use
In stock · Ships same business day

$218.00 $217.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$218.00 $217.99 Save $0.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
Aiphone

SKU: MCW-S/B

Aiphone MCW-S/B Desk Stand Adjustable

Adjustable desk stand for Aiphone intercoms; wall, ceiling, pole mount
- Adjustable desk stand for master and handset stations
- Repositions intercom for operator ergonomics
- 0.5 lb US-made desk-mount accessory
In stock · Ships same business day

$42.00 $41.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$42.00 $41.99 Save $0.01

Add to cart Add to quote Compare
Compare

Add to Cart The item has been added
Aiphone

SKU: NI-BA

Aiphone NI-BA Surface Mount Desktop Substation

Surface-mount desktop substation for hands-free intercom to 650 feet
- Surface-mount desktop substation, hands-free duplex audio
- Compatible with NIM-20B and NIM-40B master stations
- 48VDC powered via IS-PU-UL UL-listed supply
In stock · Ships same business day

$246.00 $245.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$246.00 $245.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
Aiphone

SKU: NI-SB

Aiphone NI-SB Ceiling Mount Microphone

Ceiling flush-mount microphone for hands-free intercom transmission
- Ceiling-mount stainless steel microphone sub-station
- Hands-free transmit for intercom installations
- UL-listed for institutional ceiling cavity install
$84.00 $83.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$84.00 $83.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Aiphone

SKU: NI-SOFT

Aiphone NI-SOFT Call Log Software

PC software for NIM intercom call logging and activity monitoring
- Call event log software for NIM intercom installations
- PC-based audit records of calls, answers, durations
- Includes RS-232 cable for master station connection
$170.00 $169.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$170.00 $169.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Aiphone

SKU: PD-2

Aiphone PD-2 Paging/Talkback Adaptor

Paging/talkback adaptor for TB-H/TD-H handsets with auto music mute
- Paging/talkback adapter for TD-H and TB-H/B handsets
- Connects handset stations to overhead PA systems
- 2- and 3-conductor shielded wiring support
$280.00 $279.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$280.00 $279.99 Save $0.01

Add to quote Compare
Compare

Out of stock
Aiphone

SKU: RY-AC/A

Aiphone RY-AC/A Call Extension Relay

Call extension relay for multi-zone Aiphone intercom systems
- Call extension relay for multi-station routing
- Wall, pole, or rack mount distribution module
- Eliminates single-point-of-failure communication
$80.00 $79.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$80.00 $79.99 Save $0.01

Add to quote Compare
Compare

Add to Cart The item has been added
Aiphone

SKU: RY-ES

Aiphone RY-ES External Signaling Relay

Dry contact relay triggers sirens and strobes from Aiphone master stations
- External signaling relay, 125VAC @ 1A or 30VDC @ 1A
- Drives alarm sirens, strobes, or control relays
- 0.35 lb US-made wall or rack-mount module
In stock · Ships same business day

$102.00 $101.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$102.00 $101.99 Save $0.01

Add to cart Add to quote Compare

Accessories

Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Deployment Guide PoE Planning

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Sub categories

Showing Results for Accessories

Accessories

Deployment Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading