Accessories
Sub categories
Showing Results for Accessories
-
Camden
SKU: CX-WC11AFM-PS
Camden CX-WC11AFM-PS Flush Mount Push Button & Annunciation
Flush mount push button controller for access control & door strike
- Integrated push-to-talk communication for visitor entry management
- Flush wall mount design for lobbies and secured entry points
- Compatible with electric strike hardware for single or multi-door systems
$1,394.00 $852.99 Save $541.01 -
Camden
SKU: CX-WC13AXFM
Camden CX-WC13AXFM Flush Mount Combo Illuminated Push Plate
- Flush single-gang mount consolidates activation, illumination, and wiring in one assembly.
- Integrates with CX-WC series relays, strikes, and power cabinets for barrier-free restroom control.
- Lit tactile push plate confirms door release, reducing user error in high-traffic facilities.
$788.00 $479.99 Save $308.01 -
Camden
SKU: CX-WC13AXFM-PS
Camden CX-WC13AXFM-PS Flush Mount Combo Illuminated Push Plate
- Flush-mount single-gang form factor fits standard wall boxes in retrofit installs.
- Integrated illuminated push plate eliminates separate annunciator or switch housings.
- Designed for ADA and Ontario Regulation 368/13 barrier-free restroom compliance.
$1,438.00 $879.99 Save $558.01 -
Camden
SKU: CX-WC14XFM
Camden CX-WC14XFM Flush Mount Two Door Restroom Controller
- Controls two independent electric strikes with isolated relays, enforcing door sequencing logic.
- TCP/IP connectivity enables remote activation, occupancy monitoring, and event logging over LAN.
- Flush-mount form factor installs in a standard electrical box, preserving ADA maneuvering clearance.
$1,969.00 $1,204.99 Save $764.01 -
Camden
SKU: CM-49A
Camden Flush enclosure only (fits single gang box)
Flush-mount reader housing for single gang box installations
- Fits standard single gang electrical boxes for retrofit and new construction
- Compatible with Camden keypad reader systems for access control
- Molded ABS flame and impact-resistant enclosure design
$35.99 -
Camden
SKU: CX-WC15XFM
Camden Flush Mount AURA Illuminated Push Plate - CX-WC15XFM
- TCP/IP communication enables direct integration into existing IP access control networks.
- Controls electric strike hardware, supporting push-to-exit activation at secured door points.
- Flush-mount form factor provides a clean, low-profile installation in wall surfaces.
$1,350.00 $826.99 Save $523.01 -
Camden
SKU: CX-WC13XFM
Camden Flush Mount AURA™ Illuminated Push Plate - CX-WC13XFM
- Flush-mount form factor eliminates surface enclosure bulk in barrier-free restroom installs.
$945.00 $578.99 Save $366.01 -
Camden
SKU: CX-WC13AXFM-PSFE
Camden Flush Mount Combo Illuminated Push - CX-WC13AXFM-PSFE
- Flush single-gang mount eliminates surface enclosures and extra wall penetrations.
- Integrated LED confirms door unlock status without separate annunciator or relay logic.
- 24VDC relay output integrates directly with CX-WC Series kits and electric strike hardware.
$1,438.00 $867.99 Save $570.01 -
Camden
SKU: CX-IRB
Camden Isolation Relay Module - CX-IRB
- DPDT architecture provides four contact states (N.O./N.C. per pole) from one module.
- Jumper-selectable 12/24 VDC input eliminates dual-SKU stocking across mixed voltage sites.
- 40 mA draw at both voltages safely sources from low-power access control buses.
$26.99 -
Camden
SKU: CX-95S-DH
Camden Magnetic Door Holder Surface/Flush Mount - CX-95S-DH
- Tri-volt coil accepts 12V, 24V AC/DC, or 120V AC—wire once, select at commissioning.
- Ships with surface and flush hardware; flush depth drops to 1-3/4″ for frame-recessed installs.
- Adjustable armature compensates for frame misalignment, maintaining consistent 35 lb holding force.
$157.99 -
Camden
SKU: CM-307
Camden Mortise cylinder housing for Best™ style IC core
Best IC mortise housing with 30VDC strike for HID access control
- Best format interchangeable core accepts standard IC cylinders
- 30VDC electromagnetic strike for electric door release integration
- HID credential system compatibility for networked access management
$52.99 -
Camden
SKU: CM-RH-DG
Camden Stainless Steel Double Gang Rain Hood. - CM-RH-DG
- Stainless steel double-gang rain hood for outdoor keypads and switches
- Shields Sure Wave, pushbuttons, and keyswitches from rain and sun
- Drops onto standard double-gang outdoor electrical box geometry
$52.99 -
Camden
SKU: CM-RH-SG
Camden Stainless Steel Single Gang Rain Hood. - CM-RH-SG
- Stainless steel construction shields outdoor readers from rain, snow, and sunlight.
- Foam gasket seals against irregular surfaces like brick, blocking water seepage.
- Mounts over standard single gang electrical boxes or surface-mount back boxes.
$51.99 -
Camden
SKU: CM-120i
Camden Stand alone or Wiegand flush mount 999 users - CM-120i
- Standalone or Wiegand flush-mount keypad stores 999 user PINs
- 12/24V AC/DC operation drops into standard access power buses
- Variable-length PIN code support for tiered access policies
$167.99 -
Citizen
SKU: 36AD3-U
Citizen 36AD3-U Adapter AC w/ Pwr Cord CT-S6XX/CT-S8XX
- AC adapter with power cord for Citizen CT-S6XX/CT-S8XX
- Direct-fit factory power supply for thermal printers
- OEM replacement for damaged or lost adapters
$89.61 $88.99 Save $0.62 -
Citizen
SKU: 37AD3-U
Citizen 37AD3-U Adapter AC w/ Pwr Cord CT-S6XX/CT-S8XX
- AC adapter with power cord for CT-S6XX/CT-S8XX printers
- OEM replacement power supply for thermal printer fleet
- Drop-in compatibility with existing Citizen printer install
$81.45 $80.99 Save $0.46
Accessories
Surveillance accessories support reliable system deployment, from mounting hardware and enclosures to power components and installation materials. Select the right supporting equipment to ensure durability, safety, and long-term performance.
Deployment Considerations
- Environmental protection and weather resistance
- Mounting stability and load support
- Power and voltage compatibility
- Cable management and termination quality
- Compliance with local safety standards






