Ubiquiti UPS-TOWER-US UniFi managed 1kVA uninterruptible power

Ubiquiti UPS-TOWER-US UniFi Managed 1kVA UPS

Overview

The Ubiquiti UPS-TOWER-US is a compact, managed uninterruptible power supply designed to protect UniFi infrastructure and network equipment from unexpected power loss. This 1000VA tower UPS provides 600W of continuous output power, delivering reliable battery backup for critical systems in small to medium deployments. Built with a polycarbonate and ABS blend enclosure, the unit measures 288 x 99 x 280.5 mm and weighs 8.17 kg, making it suitable for deployment in network closets, server rooms, or equipment racks without requiring significant floor space.

Key Features

The UPS-TOWER-US operates on standard 120V AC input at 12A maximum, supporting both 50 and 60 Hz power standards. Network connectivity is managed through a single 100/10 Mbps Ethernet port, enabling remote monitoring and control via UniFi management software. A single power button provides manual on/off control. The unit maintains an IP20 rating, protecting internal components while remaining suitable for indoor environments. Operating specifications span 0 to 40°C, with a maximum operating altitude of 3,000 meters, accommodating most data center and office environments. The UPS-TOWER-US carries NDAA compliance and holds FCC, IC, UL 1778, and CSA C22.2 No. 107.3 certifications, meeting North American regulatory requirements for uninterruptible power equipment.

Deployment Scenarios

This UPS is well-suited for protecting UniFi Dream Machine controllers, managed switches, and access points during brief power interruptions or voltage sags. In branch office deployments, it extends equipment runtime during outages, allowing graceful shutdown or sustained operation until main power returns. The 1kVA capacity handles typical network infrastructure loads, including controllers, PoE switches, and networking appliances. For facilities with legacy infrastructure or minimal redundancy, the UPS-TOWER-US provides a cost-effective protection layer without requiring three-phase power or complex installation procedures.

Network Integration

Managed integration occurs through the 100/10 Mbps Ethernet interface, allowing UniFi controller software to monitor battery status, remaining runtime, load percentage, and input voltage conditions. This enables proactive alerting when the UPS transitions to battery power, providing visibility into power events across your infrastructure. The network-based management approach eliminates the need for dedicated monitoring appliances or serial console connections.

Installation Notes

Mount the UPS-TOWER-US vertically on a flat, stable surface or position it on a shelf adjacent to network equipment. Ensure adequate ventilation around the enclosure and maintain environmental temperatures within the 0 to 40°C operating range. Connect the primary AC power source to the input, then connect critical equipment to the output ports. The Ubiquiti UPS-TOWER-US requires minimal configuration—simply establish network connectivity and add the device to your UniFi controller for automated monitoring and integration.

Eden Phillips, Infrastructure Specialist

"The UPS-TOWER-US fills an important gap in small-to-medium deployments where unplanned downtime carries real cost. Its UniFi management integration means you don't need separate monitoring tools or UPS-specific software. The 600W output is sufficient for most branch controllers and switch stacks, and the 1000VA capacity provides adequate headroom. One thing to note: this is genuinely a 1kVA tower format, not a compact desktop unit masquerading as one—the footprint is tight enough to slide into existing racks or closets. If you're standardizing on UniFi infrastructure, the UPS-TOWER-US makes sense as part of the ecosystem rather than bolting on a generic black-box UPS."