Code Blue products
-
Code Blue
SKU: CB4U00207
Code Blue CB4U00207 BRG WEm NP 120v Bridge
- Runs on 120V AC mains — no DC conversion hardware or external power supply needed.
- Routes audio across Code Blue paging amplifier stages, reducing single-point-of-failure risk.
- Direct OEM replacement maintains system compatibility in existing Code Blue rack installations.
$2,610.00 $2,259.99 Save $350.01 -
Code Blue
SKU: CB4S00153
Code Blue CB4S00153 CB4s GWT Remote 24V
- CB4s GWT remote module at 24V DC for Code Blue paging systems
- 12-24V DC compatible - one supply for DC circuits and security buses
- Direct-fit replacement preserves CB4s chassis and electrical specs
$900.00 $779.99 Save $120.01 -
Code Blue
SKU: CB4S00054
Code Blue CB4S00054
- 24V DC regulated output for Code Blue CB4s paging amplifiers
- 12-24V DC operation supports flexible input voltage range
- Direct-fit replacement - no field reconfiguration needed
$900.00 $779.99 Save $120.01 -
Code Blue
SKU: CB4U00038
Code Blue CB4U00038 SRD WEm NP NC Security Part
- Accepts 12–24V DC input, eliminating extra power conditioning in mixed-voltage deployments.
- Drop-in fit preserves original mounting footprint and wiring harness—no enclosure redesign needed.
- Restores Code Blue paging amplifier function without firmware or configuration changes post-swap.
$3,940.00 $3,411.99 Save $528.01 -
Code Blue
SKU: CB4S00222
Code Blue CB4S00222
- Accepts 12–24V DC input, fitting existing security power supplies and battery backup systems.
- Drop-in replacement for CB4sd series assemblies—no chassis removal or field reconfiguration needed.
- Maintains paging signal fidelity across multi-zone, multi-floor cable runs without re-termination.
$1,345.00 $1,164.99 Save $180.01 -
Code Blue
SKU: CB2S00084
Code Blue CB2S00084 Paging Amplifier Part
- Direct CB2s series replacement installs without rewiring or firmware changes.
- Dual 12–24V DC input eliminates separate SKUs across mixed-voltage site infrastructure.
- Maintains emergency paging uptime in hospitals, offices, and manufacturing facilities.
$4,550.00 $3,939.99 Save $610.01 -
Code Blue
SKU: CB2E00508
Code Blue CB2E00508 GWT Remote NP SDR Part
- Direct drop-in replacement for CB2e-series remote assemblies; no wiring modifications needed.
- Accepts 12–24V DC input, covering both voltage rails common in distributed paging deployments.
- Enables remote paging amplifier activation, simplifying multi-zone control without extra control runs.
$2,300.00 $1,991.99 Save $308.01 -
Code Blue
SKU: CB2E00499
Code Blue CB2E00499 Security Amplifier Component
- Accepts 12–24V DC input, covering both low-voltage and standard control-system power.
- Drop-in OEM replacement with identical pinout—no chassis modification required.
- Supports 4–8Ω speaker loads across multi-zone paging networks without signal degradation.
$2,050.00 $1,774.99 Save $275.01 -
Code Blue
SKU: CB2S00088
Code Blue CB2S00088 Paging Amplifier Module
- Operates on 12–24V DC, eliminating dedicated transformer requirements in mixed-power facilities.
- Drop-in replacement for CB2s series controllers reduces retrofit labor and downtime.
- Stainless steel housing resists corrosion in moisture-heavy indoor and outdoor deployments.
$4,550.00 $3,939.99 Save $610.01 -
Code Blue
SKU: CB2E00342
Code Blue CB2E00342 CB2E Sbl Bkem Np Poe Switch
- Delivers PoE data and power over a single Ethernet run, cutting field cable labor.
- Accepts 12–24V DC input, fitting both 24V hardwired and 12V auxiliary site supplies.
- Native CB2e series module enables plug-and-play swap without integration revalidation.
$2,520.00 $2,181.99 Save $338.01 -
Code Blue
SKU: CB2AP00555
Code Blue CB2AP00555 Paging Amplifier Part
- Accepts 12–24V DC input, eliminating external regulators in mixed-voltage deployments.
- OEM drop-in replacement for CB2 AP SS WEm NP DR assemblies; no firmware updates needed.
- Genuine production-grade part maintains factory tolerances across thermal and electrical ranges.
$3,250.00 $2,786.99 Save $463.01 -
Code Blue
SKU: CB2A00309
Code Blue CB2A00309 Paging Amplifier Module
- Accepts 12–24V DC input, eliminating dedicated power conditioning in mixed-voltage sites.
- Continuous-duty rated for 24/7 commercial access control and perimeter security deployments.
- Mounts on DIN rail or surface enclosures, supporting retrofit and new-build installations.
$2,900.00 $2,510.99 Save $389.01 -
Code Blue
SKU: CB2A00290
Code Blue CB2A00290 BSL CC WEm NP 24V Paging Amplifier
- Accepts 12–24V DC input, eliminating external regulators in battery-backed or DC bus systems.
- Factory-matched pinouts and footprint enable drop-in replacement with no rework or rewiring.
- Native compatibility with Code Blue control panels and speaker arrays requires no adapters.
$3,100.00 $2,683.99 Save $416.01 -
Code Blue
SKU: CB1E00507
Code Blue CB1E Mbl Wem Np 24V - CB1E00507
- Delivers isolated 24V DC regulated output, preventing audio dropout and controller lockups.
- Supports wall, pole, recessed, and 19-inch rack mounting for constrained retrofit sites.
- Engineered exclusively for CB1 series towers; not interchangeable with CB2–CB9 or CBRT.
$5,500.00 $4,715.99 Save $784.01 -
Code Blue
SKU: CB1S00763
Code Blue CB1S Aed Sbl Bkem Np 120V - CB1S00763
- Runs on 120V AC, eliminating specialized high-voltage distribution infrastructure.
- Wall, pole, recessed, and rack mount options adapt to existing facility layouts.
- Integrates natively with CB1 Series paging amplifiers—no gateway middleware needed.
$9,220.00 $7,982.99 Save $1,237.01 -
Code Blue
SKU: CB2A00308
Code Blue CB2A Sbl Bkem Np Sdr - CB2A00308
- Drop-in CB2 series replacement keeps existing wall-mount enclosures fully operational.
- Accepts 12–24V DC from host amplifier, fitting heterogeneous paging infrastructure.
- Wall, pole, recessed, and rack mount support simplifies multi-zone deployment layouts.
$3,120.00 $2,701.99 Save $418.01 -
Code Blue
SKU: CB1E00184
Code Blue CB1E00184 Paging Amplifier Backplate
- Direct-fit replacement for CB1e series paging amplifiers on 120V AC systems.
- Supports wall-mount and rack-mount configurations without special tooling.
- Service-level swap restores structural support for internal amplifier circuitry.
$5,800.00 $5,021.99 Save $778.01 -
Code Blue
SKU: CB4S00129
Code Blue CB4SD Bsl Rem Np 24V - CB4S00129
- 24V DC hardwired input eliminates AC power infrastructure at each distributed speaker node.
- Supports wall, pole, recessed, and rack mounting for flexible multi-zone deployment.
- Engineered for CB4 Series systems, maintaining impedance match across all distributed nodes.
$1,500.00 $1,298.99 Save $201.01 -
Code Blue
SKU: CB1E00486
Code Blue CB1E Sbl Wem Np Av 120V - CB1E00486
- Delivers regulated 120V AC power to CB1 series towers at the point of install.
- Wall-mount enclosure consolidates power and signal routing, reducing cable runs.
- Modular architecture allows field component swaps without full tower replacement.
$5,940.00 $5,142.99 Save $797.01 -
Code Blue
SKU: CB1E00476
Code Blue CB1E Gbk Wem Np 24VAC - CB1E00476
- Delivers 24VAC output to power CB1-series paging amplifiers and speakerphone systems.
- Supports wall, pole, recessed, and rack mounting for flexible facility deployment.
- Functions as a genuine replacement spare, minimizing downtime on 24/7 emergency paging sites.
$5,500.00 $4,761.99 Save $738.01

