Electrical & Power Supplies for Surveillance Systems

Plan Your Deployment

Voltage requirements and device compatibility
Power budgeting across cameras and access devices
Centralized vs distributed power design
Surge protection and environmental safeguards
Redundancy and uptime planning

Sub categories

Showing Results for Electrical & Power

Compare

Out of stock
Lifesafety Power

SKU: FPO150-B1002D8PM8NLCE6M/T8-A

Lifesafety Power FPO150-B1002D8PM8NLCE6M/T8-A 150W power supply
- Delivers 12A at 12V or 6A at 24V to power mid-size door controllers and readers.
- Eight individually fused 3A auxiliary outputs enable per-load fault isolation and zoning.
- Class 2 power-limited 2.5A per channel removes need for external protection on each run.
$2,879.00 $2,068.99 Save $810.01

Add to Cart
The item has been added
Free shipping over $499

$2,879.00 $2,068.99 Save $810.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C4D8E2

Lifesafety Power FPO150-B100C4D8E2 Power supply board 150W 12A/1
- Delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W board.
- 12 independently fused outputs (4 relay + 8 aux) prevent cascade faults.
- 4.5-inch depth fits shallow wall-mount and 19-inch rack enclosures.
$778.00 $558.99 Save $219.01

Add to Cart
The item has been added
Free shipping over $499

$778.00 $558.99 Save $219.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C4D8E2M

Lifesafety Power FPO150-B100C4D8E2M Power supply board 150W 12A
- Dual-voltage output (12VDC/12A or 24VDC/6A) supports legacy and modern loads from one board.
- 150W rated supply simplifies centralized power distribution for access control and auxiliary loads.
- Board-level form factor integrates into Lifesafety Power enclosures; verify mounting compatibility before ordering.
$890.00 $639.99 Save $250.01

Add to Cart
The item has been added
Free shipping over $499

$890.00 $639.99 Save $250.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C4D8E4M

Lifesafety Power FPO150-B100C4D8E4M Power supply board 150W 12A/1
- Selectable 12VDC/12A or 24VDC/6A output supports mixed-voltage device deployments.
- 150W capacity powers roughly 12–15 door locks plus access readers on a single board.
- Board form factor integrates directly into enclosures and distributed power nodes.
$1,008.00 $724.99 Save $283.01

Add to Cart
The item has been added
Free shipping over $499

$1,008.00 $724.99 Save $283.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C4D8E8S

Lifesafety Power FPO150-B100C4D8E8S 150W power supply 12A/12V
- Primary output delivers 12A @ 12VDC or 6A @ 24VDC from a single 150W supply.
- Four relay outputs are independently fused at 3A with per-output fail-safe/fail-secure selection.
- Eight aux DC outputs and an adjustable 5–18V secondary support mixed loads on isolated buses.
$1,997.00 $1,434.99 Save $562.01

Add to Cart
The item has been added
Free shipping over $499

$1,997.00 $1,434.99 Save $562.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C4P2D8PE1

Lifesafety Power FPO150-B100C4P2D8PE1 Standard Power Systems150W
- 150W regulated DC output centralizes power for cameras, locks, and readers.
- Four relay lock outputs support electromagnetic and electronic door control.
- 16 auxiliary outputs integrate sensors, strobes, and status indicators.
$682.00 $489.99 Save $192.01

Add to Cart
The item has been added
Free shipping over $499

$682.00 $489.99 Save $192.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C4PD8PE2

Lifesafety Power FPO150-B100C4PD8PE2 150W power supply 12A/12V
- Switchable 12A/12V or 6A/24V primary output supports varied lock and device loads.
- Four relay outputs selectable per-channel for FAI, fail-safe, or fail-secure door control.
- Eight Class 2 DC auxiliary outputs at 2.5A each, assignable across two independent buses.
$778.00 $558.99 Save $219.01

Add to Cart
The item has been added
Free shipping over $499

$778.00 $558.99 Save $219.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8E4M/T8-A

Lifesafety Power FPO150-B100C82D8E4M/T8-A 150W power supply 12A
- Dual primary outputs deliver 12A@12V or 6A@24V from a single 150W module.
- 8 relay outputs support mixed FAI/failsafe/failsecure modes in one enclosure.
- 16 aux DC outputs, each 3A-fused, assign independently to Bus1 or Bus2.
$1,850.00 $1,329.99 Save $520.01

Add to Cart
The item has been added
Free shipping over $499

$1,850.00 $1,329.99 Save $520.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4H1/P8-C

Lifesafety Power FPO150-B100C82D8PE4H1/P8-C 150W power supply
- Delivers 150W at 12VDC/12A or 24VDC/6A to support legacy and modern lock hardware.
$2,441.00 $1,753.99 Save $687.01

Add to Cart
The item has been added
Free shipping over $499

$2,441.00 $1,753.99 Save $687.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4H1/P8-D

Lifesafety Power FPO150-B100C82D8PE4H1/P8-D 150W power supply
- 8 relay lock outputs, each fused at 3A, support failsafe, failsecure, or FAI modes.
- 8 class 2 auxiliary DC outputs at 2.5A each enable safe, code-compliant device power.
- Dual-bus architecture lets each auxiliary output select Bus1 or Bus2 independently.
$2,621.00 $1,882.99 Save $738.01

Add to Cart
The item has been added
Free shipping over $499

$2,621.00 $1,882.99 Save $738.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M/P8-A

Lifesafety Power FPO150-B100C82D8PE4M/P8-A 150W power supply 12A
- Dual-voltage output (12VDC/12A or 24VDC/6A) powers mixed endpoint devices from one chassis.
- Eight 3A relay outputs support per-door failsafe, failsecure, or FAI logic for life-safety integration.
- Sixteen Class 2 DC aux outputs with Bus1/Bus2 segregation simplify multi-zone circuit supervision.
$2,058.00 $1,478.99 Save $579.01
Free shipping over $499

$2,058.00 $1,478.99 Save $579.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M/P8-C

Lifesafety Power FPO150-B100C82D8PE4M/P8-C 150W power supply 12A
- Delivers 12A @ 12VDC or 6A @ 24VDC to power multiple locks and control devices.
- 8 relay lock outputs are individually configurable for failsafe, failsecure, or FAI.
- 16 auxiliary outputs split across two buses simplify multi-zone load segregation.
$1,978.00 $1,420.99 Save $557.01

Add to Cart
The item has been added
Free shipping over $499

$1,978.00 $1,420.99 Save $557.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M/T8-A

Lifesafety Power FPO150-B100C82D8PE4M/T8-A 8DR E4M 150W 4A/12V
- 150W redundant supply delivers 4A at 12V and 4A at 24V across 8 isolated outputs.
- Dual-voltage design powers legacy 12V cameras and 24V access control from one unit.
- Eight separate output channels eliminate daisy-chain voltage sag across locks and readers.
$1,850.00 $1,329.99 Save $520.01
Free shipping over $499

$1,850.00 $1,329.99 Save $520.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M/T8-C

Lifesafety Power FPO150-B100C82D8PE4M/T8-C PreWired Mercury 8DR
- Delivers 4A at 12V and 4A at 24V simultaneously to power up to 8 door locks.
- Factory-prewired MR52 harnesses eliminate field termination and reduce install errors.
- 16 auxiliary outputs support relays, REX buttons, LEDs, and door sensors.
$1,850.00 $1,329.99 Save $520.01

Add to Cart
The item has been added
Free shipping over $499

$1,850.00 $1,329.99 Save $520.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M1/P8-B

Lifesafety Power FPO150-B100C82D8PE4M1/P8-B 150W power supply
- Dual 12VDC/24VDC bus runs mixed lock and reader types from one UL-listed cabinet.
- 8 fused 3A relay outputs plus 16 aux outputs cover doors and sensors without add-on hardware.
- Form C fault contacts report AC loss, blown fuses, and battery faults for clean FACP integration.
$2,244.00 $1,612.99 Save $631.01

Add to Cart
The item has been added
Free shipping over $499

$2,244.00 $1,612.99 Save $631.01

Add to quote Compare
Compare

Out of stock
Lifesafety Power

SKU: FPO150-B100C82D8PE4M1/T8-A

Lifesafety Power FPO150-B100C82D8PE4M1/T8-A 8DR E4M 150W 4A/12V
- Eight isolated 12V/24V rails prevent a single-device fault from collapsing system power.
- 150W envelope supports mixed mag locks, readers, and aux relays at 4A per rail.
- Ships pre-wired with tie-wrap harness, reducing bench time and installation wiring errors.
$2,076.00 $1,491.99 Save $584.01

Add to Cart
The item has been added
Free shipping over $499

$2,076.00 $1,491.99 Save $584.01

Add to quote Compare

What to Look For When Buying

The decisions that matter most before you spec.

PoE Budget Planning & Oversubscription Risk

PoE switches are frequently rated for more cameras than their actual power budget allows. Read PoE Budget Planning for IP Camera Deployments to understand injector and supply sizing before deployment. Undersizing power delivery is a leading cause of intermittent camera failures and system collapse under load.

Power Failure Cascades & System Downtime

When electrical infrastructure fails, entire surveillance zones go dark. Why Surveillance Systems Fail During Incidents documents how inadequate power conditioning and lack of UPS cause loss of footage during security events. Plan battery backup for NVRs, edge recorders, and access control hubs.

Cable Distance & Voltage Drop

PoE and DC power delivery degrade over distance; runs beyond 100 meters often require midspan injectors or stepped-up supplies. Verify cable gauge and run length before selecting power distribution topology to avoid under-voltage conditions at the camera.

Multi-Location Standardization

Why Surveillance Standards Collapse After the Third Location shows how power supply mismatches across sites create maintenance nightmares. Choose a consistent voltage (12V, 24V, or PoE) and supplier throughout your deployment to reduce spare parts inventory and service complexity.

Redundant & Managed Power Distribution

Enterprise deployments benefit from redundant power paths, monitored PDUs, and ring topologies that isolate failures. Higher-end Honeywell and i-PRO systems often integrate power monitoring; plan accordingly for large campuses or critical facilities.

Environmental & Temperature Ratings

Outdoor and harsh-environment installations demand industrial-grade supplies rated for extended temperature, humidity, and vibration. Confirm operating range and mean-time-between-failure (MTBF) specifications before deployment in uncontrolled spaces.

Technology Stack

The specs and acronyms that actually affect electrical & power performance.

Power over Ethernet (PoE)

Delivers power and data via Cat5e/6 cable to end devices, eliminating separate power runs. Standard PoE (15.4W) and PoE+ (30W) cover most IP cameras; PoE++ (60–90W) supports high-power PTZ and multi-sensor units. Budget for realistic camera counts per switch to avoid brownout conditions.

Volt & Amperage (12V DC, 24V AC/DC)

Most analog and IP camera supplies operate at 12V DC or 24V AC. Verify polarity and current draw (mA or A) to select the right supply gauge; undersized supplies cause brownout and intermittent operation. Industrial systems often standardize on 24V for longer cable runs with less voltage drop.

Uninterruptible Power Supply (UPS)

Provides instant switchover to battery during mains failure, keeping NVRs, access control panels, and network infrastructure online. Capacity is measured in VA (volt-amperes) and run-time minutes; size for critical equipment and desired hold-up duration (typically 15–60 minutes).

Surge Protection & Transient Voltage Suppression (TVS)

Clamps lightning and inductive load spikes to safe levels, preventing component damage. Essential on outdoor camera circuits and near HVAC, door motors, and panel relays. Look for devices with replaceable cartridges or indication lights.

DIN-Rail Power Distribution

Modular power supplies and distribution blocks mounted on standard 35mm rail for easy expansion and maintenance. Common in control rooms, server racks, and equipment shelters; simplifies wiring and reduces clutter.

Cable Gauge & Voltage Drop

Thicker wire (lower AWG) reduces resistance and voltage loss over distance. For 12V runs >30m or 24V runs >50m, use oversized cable or inject power mid-span. Poor power distribution cascades into storage and network failures.

Typical Deployment Scenarios

Campus with Distributed Cameras (50–100 units)

Deploy a central PoE+ switch (24–48 ports) in the server room backed by a 2kVA UPS, with midspan Geovision or Honeywell injectors at remote buildings. Use surge-protected DIN-rail distribution and a 10–15 minute UPS hold-up to ensure graceful shutdown during mains failure.

Retrofit with Mixed 12V & PoE Cameras

Combine PoE cameras (via switch injector) with legacy 12V dome cameras (fed by industrial 12V DC supply + surge protector). Standardize termination and cable routing to simplify future moves/adds/changes. Size supply at 1.5× total expected load to handle inrush current.

Remote Unmanned Site (10–15 cameras)

Use a compact PoE injector or managed PoE+ switch, protected by a DIN-rail surge module and a 500VA UPS with 30–45 minute battery runtime. Include a backup 4G cellular gateway powered by the same UPS to retain remote access if mains fails.

Access Control + Video Integration (multi-reader facility)

Deploy redundant 24V AC supplies for door controllers and readers, with a separate 12V DC power budget for IP intercoms. Size a 3–5kVA UPS with extended runtime to hold access and surveillance during emergencies; add battery monitoring to alert before depletion.

Frequently Asked Questions

How many cameras can one PoE switch really support?

Rated port count does not equal real-world capacity. A 24-port PoE+ switch (370W budget) typically supports 10–14 high-powered cameras, not 24. Learn why PoE switches fail before rated count and plan injectors or additional switches accordingly.

What size UPS do I need for my surveillance system?

Calculate total watts of all equipment (NVR, switch, access control, intercoms) and multiply by 1.2 for safety. A 1000W device requires a 1.2kVA UPS minimum. For 30–60 minute hold-up, add battery packs. Consult the UPS datasheet runtime table for your exact load.

Can I run cameras over long cable distances without power loss?

Beyond 100 meters, voltage drop becomes significant. Use thicker cable (e.g., 10/2 instead of 18/2) or deploy a midspan PoE injector at the halfway point. Test actual voltage at the camera before and during operation to confirm it meets the minimum 11.5V for PoE devices.

Should I use surge protection outdoors?

Yes. Outdoor camera runs, especially on poles or towers, attract lightning transients that destroy unprotected equipment. Install a surge-suppression cartridge or dedicated SPD (Surge Protective Device) at the camera supply entry point.

What's the difference between 12V and 24V supplies?

24V systems have lower current for the same power, so they suffer less voltage drop over distance and are preferred for long cable runs and industrial deployments. 12V is common in legacy and compact camera designs. Choose based on your camera specs, not preference; mixing standards requires careful supply sizing and testing.

How often should I test my UPS battery backup?

Test battery runtime (load test) at least quarterly, or annually if the UPS is older. Monitor battery age; most UPS batteries degrade after 3–5 years and should be replaced proactively. For critical facilities, use a monitored UPS with email alerts for battery health.

Electrical & Power

Plan Your Deployment

Sub categories

Showing Results for Electrical & Power

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Electrical & Power

Frequently Asked Questions

Related Categories

Engineering Reading