Showing Results for RFID Systems

Compare

Add to Cart The item has been added
Zebra

SKU: RFD9031-G30G700-US

Zebra RFD9031-G30G700-US UHF RFID Sled

US UHF RFID sled for mobile computers—1,300+ tags/sec at 22 ft range
- Reads 1,300+ tags per second with 22 ft nominal range for rapid inventory
- IP65/IP67 rated, 6 ft drop-to-concrete rated for warehouse/logistics use
- 7,000 mAh battery, 802.11ax WiFi, Bluetooth 5.3 connectivity options
In stock · Ships same business day

$2,366.90 $1,623.99 Save $742.91

Add to Cart
The item has been added
Free shipping over $499

$2,366.90 $1,623.99 Save $742.91

Add to cart Add to quote Compare
Compare

Out of stock
Zebra

SKU: RFD9031-G60G700-FT

Zebra RFD9031-G60G700-FT Mobile Computer

Wired handheld computer with 1D/2D scanning for warehouse operations
- 3160mAh battery sustains full-shift scanning without mid-shift recharging.
- 1.2m drop rating onto concrete reduces replacement costs in high-motion workflows.
- SE4850 scan engine reads 1D and 2D symbologies including QR Code and Data Matrix.
$2,583.90 $1,908.99 Save $674.91

Add to Cart
The item has been added
Free shipping over $499

$2,583.90 $1,908.99 Save $674.91

Add to quote Compare
Compare

Out of stock
Zebra

SKU: RFD9031-G60G700-US

Zebra RFD9031-G60G700-US Premium Plus Mobile Computer

1D/2D barcode scanner with 4410mAh battery for all-day warehouse use
- Integrated 1D/2D scan engine reads Code 39, Code 128, QR, Data Matrix, and PDF417.
- 4410mAh battery sustains all-day warehouse and logistics shifts without mid-shift charging.
- Bluetooth connectivity enables wireless WMS synchronization across warehouse floor deployments.
$2,583.90 $1,908.99 Save $674.91

Add to Cart
The item has been added
Free shipping over $499

$2,583.90 $1,908.99 Save $674.91

Add to quote Compare
Compare

Out of stock
Zebra

SKU: RFD9091-G30G700-FT

Zebra RFD9091-G30G700-FT Premium RFID Mobile Computer

Long-range UHF RFID handheld reader for warehouse inventory and asset tracking
- EPC Gen 2 UHF RFID captures bulk tags at extended range across warehouse floors.
- 3160mAh battery sustains multi-shift operation without mid-cycle recharging.
- 1.2m drop rating and -40°C to 70°C storage range suit harsh field deployments.
$2,473.90 $1,795.99 Save $677.91

Add to Cart
The item has been added
Free shipping over $499

$2,473.90 $1,795.99 Save $677.91

Add to quote Compare
Compare

Add to Cart The item has been added
Zebra

SKU: RFD9091-G30G700-US

Zebra RFD9091-G30G700-US Premium Plus Long-Range UHF RFID Mobile Computer

Wired UHF RFID handheld for warehouse density with long-range read
- Long-range UHF RFID reads dense rack and pallet tags in a single pass, cutting cycle time.
- 3160mAh battery sustains full-shift scanning without mid-shift recharge interruptions.
- 1.2m drop rating and wired connectivity reduce failure risk in high-throughput warehouse floors.
$2,661.94 $1,827.99 Save $833.95

Add to Cart
The item has been added
Free shipping over $499

$2,661.94 $1,827.99 Save $833.95

Add to cart Add to quote Compare
Compare

Out of stock
Zebra

SKU: RFD9091-G60G700-FT

Zebra RFD9091-G60G700-FT Premium Plus Long Range RFID Mobile

Long-range RFID handheld for warehouse asset tracking and inventory
- 3160mAh battery sustains full-shift RFID scanning without mid-shift recharging.
- 1.2m drop rating protects the unit from concrete-floor impacts in warehouse use.
- Wired connectivity eliminates wireless dropout risk in RF-dense facility environments.
$2,858.90 $2,111.99 Save $746.91

Add to Cart
The item has been added
Free shipping over $499

$2,858.90 $2,111.99 Save $746.91

Add to quote Compare
Compare

Out of stock
Zebra

SKU: RFD9091-G60G700-US

Zebra RFD9091-G60G700-US Long-Range RFID Mobile Computer

Long-range RFID mobile computer with 1D/2D scanning for warehouse operations
- 4410 mAh battery sustains full 8–10 hour shifts without mid-shift recharging.
- Reads Code 128, Code 39, UPC, EAN, QR, and Data Matrix—no custom label re-encoding required.
- Bluetooth connectivity supports Android, iOS, and Windows hosts for flexible deployment.
$2,858.90 $2,074.99 Save $783.91

Add to Cart
The item has been added
Free shipping over $499

$2,858.90 $2,074.99 Save $783.91

Add to quote Compare

RFID Systems

RFID systems enable automated inventory tracking and asset visibility across warehouses, distribution centers, and supply chain operations. Using radio frequency identification technology, RFID readers capture data from tagged items without requiring direct line-of-sight scanning, allowing organizations to improve inventory accuracy and operational efficiency.

RFID Deployment Considerations

Fixed vs handheld RFID reader deployments
RFID antenna coverage and read zones
Tag type and frequency compatibility
Integration with WMS and inventory systems
Infrastructure requirements for RFID environments

Handheld RFID Readers Fixed RFID Readers RFID Antennas

What to Look For When Buying

The decisions that matter most before you spec.

Frequency Band & Regulatory Compliance

RFID systems operate in UHF (860–960 MHz), HF (13.56 MHz), or LF (125 kHz) bands, each with regional restrictions and read-range trade-offs. Ensure reader and antenna certifications match your operating geography—US, EU, China, and ASEAN regions have different legal channels and power limits. Multi-region capable systems avoid costly re-certification during expansion.

Read Range & Throughput Requirements

Portal and dock-gate RFID systems must handle high-velocity tag populations—some deployments require reading 200+ tags per second. Reader sensitivity, antenna gain, and tag design directly impact whether you can identify individual items in a fast-moving pallet or carton load. Test read performance under real warehouse RF noise before committing to a system architecture.

Integration with WMS & Network Infrastructure

RFID readers connect via Ethernet (PoE or dedicated), RS-232, or USB; backend integration depends on your WMS, ERP, and real-time visibility stack. Readers must output clean data feeds compatible with your middleware layer. Plan for edge compute, redundant network paths, and failover logic—similar discipline applies to any large distributed data-capture system as outlined in network infrastructure planning.

Environmental & Metal-Proximity Effects

Metal shelving, RF-reflective building materials, and humid conditions degrade RFID performance. Water-filled containers and metallic inventory introduce read zones and dead spots. Site surveys and pilot deployments are mandatory—you cannot assume catalog read ranges apply to your warehouse layout. Budget for antenna repositioning and potential reader redundancy in high-interference areas.

Tag Encoding & Data Management

RFID tags store limited data (typically 96–512 bits); most systems encode only a unique ID and link to backend database records. Plan your tag encoding strategy, serialization scheme, and data synchronization between readers and your central system. Tag reuse, overwrite policies, and audit trails require deliberate database design—don't assume real-time accuracy without strong data governance.

Total Cost of Ownership & Scalability

RFID deployment cost includes readers, antennas, tags, cabling, mounts, and system integration labor. Per-tag cost drops with volume, but large-scale rollouts (multi-site, high-SKU environments) demand careful ROI analysis. Platforms from Zebra, Socket Mobile, and TSC offer different price-to-performance profiles; evaluate total cost over a 3–5 year lifecycle, including tag replacement and system upgrades.

Technology Stack

The specs and acronyms that actually affect rfid systems performance.

UHF RFID (860–960 MHz)

The dominant frequency band for warehouse and supply-chain RFID, offering read ranges of 3–10+ meters depending on antenna and tag power. UHF is less affected by metal proximity than HF but more susceptible to interference from wireless networks. Regional variant (US, EU, China) compliance is required; plan for multi-region reader capability if you operate across borders.

HF RFID (13.56 MHz)

High-frequency systems ideal for item-level tagging and close-range (< 1 meter) read applications. HF is resistant to metal and water interference, making it suitable for apparel, pharmaceuticals, and liquid-container tracking. Lower read range than UHF requires more dense antenna placement and is better suited to smaller warehouse footprints or specific item-level workflows.

EIRP (Effective Isotropic Radiated Power)

The measured transmit power of an RFID reader/antenna combo, directly governed by regional regulations. Higher EIRP increases read range but consumes more power and generates more RF noise. Understanding EIRP limits in your region prevents over-specifying readers and antennas, reducing cost and power budget waste.

Passive vs. Active Tags

Passive tags use energy harvested from the reader's RF signal, offering longer lifespan (10+ years) and lower per-tag cost but requiring stronger reader signals and shorter read range. Active tags have on-board batteries, delivering 10–100+ meter range but incurring higher cost and 3–5 year battery life limits. Choose passive for high-volume, low-cost inventory; active for high-value assets requiring long-range visibility.

Anti-Collision Protocol & Tag Singulation

RFID systems use anti-collision algorithms (e.g., Aloha, Q-algorithm) to identify multiple tags in a single read field simultaneously. Faster singulation rates and dense tag populations demand readers with intelligent query logic. Poor anti-collision design leads to tag read misses and inventory discrepancies in high-throughput loading docks.

Middleware & Real-Time Locating Systems (RTLS)

Backend software layers aggregate reader data, filter duplicates, correlate timestamps, and feed clean events to your WMS or ERP. Advanced RTLS deployments use triangulation from multiple readers to track asset location in real time. Middleware complexity and latency requirements should inform your reader selection and network architecture design.

Typical Deployment Scenarios

Loading Dock Portal Gateway

A 12-foot-wide dock entrance fitted with fixed UHF RFID portals (2 readers, 4 antennas) scanning inbound and outbound pallets at 200+ tags per second. Zebra or Socket Mobile readers feed a middleware layer that correlates pallet IDs with ASN (Advanced Shipping Notice) data in real time. Network is dual-Ethernet with local edge caching to survive WAN latency.

Warehouse Aisle & Shelf-Level Inventory Verification

Mobile RFID readers (handheld or mounted on inventory robots) conduct cyclical counts and exception reports. Operators use mobile computers with integrated RFID to tag and count items on shelves, cross-referencing against system records. Passive tags on cases or pallets enable barcode-plus-RFID hybrid workflows for exceptions and manual corrections.

High-Value Asset Tracking Across Multiple Facilities

Active RFID tags on equipment, tools, and high-cost inventory enable long-range (50–100 meter) locating across 5+ warehouse locations. Fixed reader networks at each site feed RTLS middleware that tracks asset movement and geofencing. TSC and Unitech platforms offer converged hardware supporting both fixed portals and mobile asset-locating workflows.

Pharmaceutical & Cold-Chain Compliance Tracking

HF RFID tags on temperature-sensitive shipments work alongside label printers that apply compliance labels. RFID readers at cold-storage entry/exit gates log chain-of-custody events. Integration with WMS and audit logs satisfies FDA 21 CFR Part 11 and serialization requirements for track-and-trace compliance.

Frequently Asked Questions

What is the typical read range of a warehouse RFID system?

UHF RFID readers achieve 3–10 meters in open air with passive tags and 50–100 meters with active tags, depending on antenna gain, reader power, and tag design. Real-world warehouse environments reduce these ranges due to metal shelving, RF noise, and material interference. Conduct a site survey and pilot test before assuming catalog ranges; metal proximity and water content can degrade performance by 30–50%.

Can RFID systems work alongside barcode scanners in the same workflow?

Yes. Hybrid systems combine RFID for bulk, line-of-sight-free reads (pallets, cartons) with barcode scanning for item-level verification and exceptions. Barcode scanners paired with RFID-capable mobile computers enable operators to confirm RFID reads or fall back to barcode when tags are unreadable. Many WMS platforms support rules-based logic to decide which capture method to prioritize based on operational context.

What are the regulatory compliance requirements for RFID deployment?

RFID readers and antennas must comply with regional radio regulations: FCC (US, 902–928 MHz), ETSI (EU, 865–868 MHz), and ARIB (Japan). China uses 920–925 MHz. Multi-region readers support voltage and channel switching but require certification in each territory. If you operate globally, verify your reader model list includes certifications for all your operating regions before purchasing.

How do passive and active RFID tags differ in warehouse applications?

Passive tags have no battery, derive power from reader RF signals, and cost $0.10–$1.00 each; they suit high-volume inventory (millions of tags) but require stronger readers and shorter read ranges. Active tags carry batteries, offer 50–100 meter range and 10+ year lifespan, and cost $5–$25 each; they work well for high-value asset tracking and long-range facility monitoring. Most warehouse programs use passive for cases and pallets and active for reusable equipment.

What infrastructure do I need to integrate RFID readers into my warehouse network?

Readers connect via Ethernet (PoE-powered or dedicated power), RS-232 serial, or USB and require middleware to aggregate data, filter duplicates, and forward clean events to your WMS or ERP. Plan for edge caching to handle network latency, redundant paths for critical dock gates, and proper cable management with industrial-grade cabling to withstand vibration and moisture. Bandwidth requirements are typically low (<1 Mbps) unless you have high-velocity, multi-reader deployments.

How do I prevent tag collision and missed reads in a high-throughput loading dock?

RFID systems use anti-collision algorithms (Aloha or Q-algorithm) to singulate multiple tags in a read field. High-throughput docks (200+ tags/sec) require readers with fast query rates and intelligent antennas positioned to separate tag populations (e.g., stacked pallets). Testing under load and tuning reader sensitivity, power levels, and antenna patterns reduces misses. Consider redundant readers or antennas for critical gating to achieve >99% read accuracy.

Sub categories

Showing Results for RFID Systems

Zebra RFD9031-G30G700-US UHF RFID Sled

Zebra RFD9031-G60G700-FT Mobile Computer

Zebra RFD9031-G60G700-US Premium Plus Mobile Computer

Zebra RFD9091-G30G700-FT Premium RFID Mobile Computer

Zebra RFD9091-G30G700-US Premium Plus Long-Range UHF RFID Mobile Computer

Zebra RFD9091-G60G700-FT Premium Plus Long Range RFID Mobile

Zebra RFD9091-G60G700-US Long-Range RFID Mobile Computer

RFID Systems

RFID Deployment Considerations

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for RFID Systems

Frequently Asked Questions

Related Categories

Engineering Reading