Vivotek AM-21N Multi-Sensor Camera Tilt Wall Mount
Overview
The Vivotek AM-21N is a precision wall mount bracket engineered specifically for Vivotek's MS9390 series multi-sensor cameras. This accessory solves a critical deployment problem: getting a heavy, panoramic multi-sensor camera positioned exactly where it needs to be on a wall while maintaining rock-solid stability. The adjustable tilt mechanism lets you dial in the optimal camera angle without requiring an entirely different mounting solution, which saves both time during installation and money by avoiding custom fabrication.
Key Features
- Optimized for MS9390-HV and MS9390-EHV-v2: Mechanically matched to these specific multi-sensor models, ensuring full load capacity and eliminating compatibility guesswork on the job site.
- Adjustable tilt positioning: The tilt mechanism allows you to angle the camera up or down after mounting, so you can adapt coverage without remounting hardware — meaningful when fine-tuning coverage of entryways or parking areas mid-deployment.
- Aluminum alloy construction: Lightweight yet rigid material resists flexing under the weight of multi-sensor camera bodies, and aluminum's corrosion resistance extends service life compared to steel in outdoor and high-humidity environments without requiring expensive coatings.
- Secure locking mechanism: Once positioned, the tilt locks in place so vibration or wind won't shift the camera angle — critical for maintaining consistent panoramic coverage across 24/7 recording.
- 3/4" NPT pipe thread interface: This standard industry thread works with existing wall or ceiling conduit runs and pole-mounted infrastructure, reducing the need for adapter plates or custom brackets.
- Compact form factor (167 × 122.2 × 64.8 mm, 415 g): The low-profile design minimizes visual clutter on walls — important in retail or public venues where discrete security hardware is preferred. The 415-gram weight keeps installation safe and straightforward without requiring heavy-duty anchoring.
Compatibility & Integration
The AM-21N (often searched as AM 21N) is designed exclusively for Vivotek's MS9390-HV and MS9390-EHV-v2 multi-sensor models. Before ordering, verify your camera model matches — this bracket will not fit other Vivotek panoramic cameras or competitor multi-sensor systems. The 3/4" PF thread interface integrates with standard conduit runs, pole mounts, and wall anchor kits commonly stocked by security integrators.
Deployment Scenarios
This mount excels in fixed surveillance roles where you need a multi-sensor camera mounted high on a wall but must retain flexibility to adjust tilt angle after installation. Typical applications include shopping center entrances, parking facility perimeters, transportation hubs, and public venues where pan-tilt-zoom motion isn't required but adjustable positioning is. The white aluminum finish blends into most ceiling and wall infrastructure without drawing attention.
Frequently Asked Questions
Q: Is the AM-21N compatible with Vivotek's older MS9390 models?
A: No. The AM-21N is optimized for MS9390-HV and MS9390-EHV-v2 only. Check your camera's model label before ordering to avoid compatibility issues.
Q: What's the maximum weight this mount can support?
A: The bracket is rated for the MS9390-HV and MS9390-EHV-v2 camera bodies. Do not exceed the weight of these models, and always use appropriate wall anchors or conduit support rated for the combined load.
Q: Does the tilt adjustment require tools once the camera is mounted?
A: The tilt mechanism is designed for post-mount adjustment, but refer to the manufacturer's documentation for specific adjustment procedures and any tools required to unlock or re-lock the tilt position.
Q: Can this mount be used indoors and outdoors?
A: Yes. The aluminum alloy construction is rated for both indoor and outdoor use. For harsh marine or heavily corrosive environments, inspect the bracket periodically for oxidation and apply additional protective coatings if needed.
Q: What thread size does the AM-21N use?
A: 3/4" NPT (National Pipe Thread) — a standard industrial thread compatible with most wall conduit and pole-mount infrastructure.
Q: Will the mount work with a standard wall anchor kit?
A: Yes, provided your wall anchors are rated for the combined weight of the bracket and camera body. Always consult the wall anchor manufacturer's specifications to ensure safe installation.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The AM-21N is a straightforward, purpose-built bracket for anyone deploying Vivotek multi-sensor cameras on fixed walls. I recommend this specifically when your MS9390-HV or MS9390-EHV-v2 needs to be mounted high and positioned at a non-standard angle — the adjustable tilt saves you from either accepting poor coverage or paying for a custom fabricated bracket.
Technical Highlights:
- Aluminum alloy + white finish: At 415 grams, it's light enough that standard wall anchors can handle the combined load, yet rigid enough that multi-sensor panoramic cameras won't flex the mount under their own weight or environmental vibration.
- 3/4" PF thread: Integrates directly into existing conduit runs and infrastructure, eliminating adapter plates and reducing integration labor — especially valuable on retrofit jobs where wall conduit is already in place.
- Dedicated MS9390-HV and MS9390-EHV-v2 fit: No guesswork on load capacity or mechanical compatibility; the bracket is mechanically matched to these exact models, so installation is predictable and repeatable across your fleet.
Deployment Considerations:
- This is a fixed wall mount with adjustable tilt — not a PTZ mechanism. If you need panoramic sweep or motion-tracking, add an actual PTZ camera instead of relying on this mount to compensate.
- Verify your wall substrate and anchor rating before installation. A 415-gram bracket plus a multi-sensor camera body can easily exceed 3–4 kg total; inadequate anchors will fail silently and then catastrophically.
Best fit: retail entrance ways, parking lot perimeters, and fixed surveillance posts where you need a multi-sensor panoramic camera positioned at a non-standard angle and you want to lock it in place after installation without additional tweaking.
